Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 204 for “"Kelvin Probe"”.
-
Kelvin Probe Force Microscopy (KPFM) for nanoelectronic device characterisation
This project is to develope a new method of characterization for Silicon-nano-wire (SiNW) FET and SET devices by using KPFM technology to derive the information of local surface potential change on the channel of SiNW devices. The surface potential is related to many important parameters on …
-
Time-Resolved Kelvin Probe Force Microscopy of Nanostructured Devices
Since its inception a quarter of a century ago, Kelvin probe force microscopy (KPFM) has enabled studying contact potential differences (CPDs) on the nanometre scale. However, current KPFM investigations are limited by the bandwidth of its constituent electronic loops to the millisecond regime. To …
-
Rapid, electrostatic self-assembly of nanoparticles with kelvin probe characterisation
… intended to be highly compatible with a Scanning Probe Microscope-style tip that could act as the manipulator tool on such an assembly line. This led to the design of several devices that were intended to capture single nanoparticles from a colloidal suspension, which had a negative surface charge …
-
Kelvin Probe Microscopy Studies of Epitaxial Graphene on SiC(0001)
… the spatial charge inhomogeneity seen in scanned-probe experiments. In contrast, the scattering mechanisms and charge distribution in epitaxial graphene remain relatively unexplored. Here I use Kelvin probe microscopy (KPM) in ambient and UHV conditions to directly measure the surface potential of …
-
Visualisation of Local Charge Densities with Kelvin Probe Force Microscopy
For the past decades, Kelvin probe force microscopy (KPFM) developed from a sidebranch of atomic force microscopy to a widely used standard technique. It allows to measure electrostatic potentials on any type of sample material with an unprecedented spatial resolution. While the technical aspects …
-
Design, Fabrication and Validation of a CMOS-MEMS Kelvin Probe Force Microscope
The Kelvin Probe Force Microscope is a type of scanning probe instrument that is used to discern the different work functions of a sample. A sharp probe at the end of a cantilever is lowered onto a substrate where electrostatic forces, caused by the difference in work function cause the cantilever …
-
Kelvin Probe Electrode for Field Detection of Corrosion of Steel in Concrete
While the Kelvin Probe (KP) has been used in a variety of surface scanning applications, the use of the KP in reinforced concrete structures to detect corrosion has been pioneered by previous work performed at the University of South Florida. However, in that work, the scale and construction of the …
-
Kelvin Probe Electrode for Contactless Potential Measurement on Concrete-Properties and Applications
The practical feasibility of using a Kelvin Probe as a novel reference electrode in the measurement of both potential and polarization pulse response of reinforcing steel in concrete is demonstrated. Potential values measured using a KP reflect greater stability and repeatability than can typically …
-
Micropatterns for surface potential mapping of biomolecules by kelvin probe force microscopy
… potential and electrophoretic mobility. However, Kelvin probe force microscopy (KPFM) have gained attention due to its expanding possibilities to asses electrostatic properties of biomolecules. Among the advantages that KPFM possess over other methods, stands out its high sensitivity and spatial …
-
Characterization of InAs Quantum Dots in InP Nanowires Using a Kelvin Probe Force Microscopy
… nanowires, we used a sharp metallic (tungsten) probe having a tip radius of 0.5 µm with a taper angle 8-10 degrees for the NW transfer challenges that arise during the transfer process due to the substantial size difference between the probe and the nanowires. We applied a negative bias voltage …
-
Vibrating Kelvin Probe Measurements of a Silicon Surface with the Underside Exposed to Light
This thesis addresses the use of a vibrating Kelvin probe to monitor the change in the front surface potential of a silicon wafer while the rear surface is illuminated with monochromatic, visible light. Two tests were run to verify the change in surface potential. One test increased the intensity …
-
Investigation of Surface States and Device Surface Charging in Nitride Materials Using Scanning Kelvin Probe Microscopy
In this work Scanning Kelvin Probe Microscopy (SKPM) was used to characterize surface states and device surface charging in nitride materials. Samples grown by Molecular Beam Epitaxy (MBE), Metal Organic Chemical Vapor Deposition (MOCVD) and Hydride Vapor Phase Epitaxy (HVPE) typically show a high …
Page 1 of 11