Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 115 for “"Kelvin Probe Force Microscopy"”.
-
Kelvin Probe Force Microscopy (KPFM) for nanoelectronic device characterisation
This project is to develope a new method of characterization for Silicon-nano-wire (SiNW) FET and SET devices by using KPFM technology to derive the information of local surface potential change on the channel of SiNW devices. The surface potential is related to many important parameters on …
-
Time-Resolved Kelvin Probe Force Microscopy of Nanostructured Devices
Since its inception a quarter of a century ago, Kelvin probe force microscopy (KPFM) has enabled studying contact potential differences (CPDs) on the nanometre scale. However, current KPFM investigations are limited by the bandwidth of its constituent electronic loops to the millisecond regime. To …
-
Visualisation of Local Charge Densities with Kelvin Probe Force Microscopy
For the past decades, Kelvin probe force microscopy (KPFM) developed from a sidebranch of atomic force microscopy to a widely used standard technique. It allows to measure electrostatic potentials on any type of sample material with an unprecedented spatial resolution. While the technical aspects …
-
Micropatterns for surface potential mapping of biomolecules by kelvin probe force microscopy
… potential and electrophoretic mobility. However, Kelvin probe force microscopy (KPFM) have gained attention due to its expanding possibilities to asses electrostatic properties of biomolecules. Among the advantages that KPFM possess over other methods, stands out its high sensitivity and spatial …
-
Characterization of InAs Quantum Dots in InP Nanowires Using a Kelvin Probe Force Microscopy
… nanowires, we used a sharp metallic (tungsten) probe having a tip radius of 0.5 µm with a taper angle 8-10 degrees for the NW transfer challenges that arise during the transfer process due to the substantial size difference between the probe and the nanowires. We applied a negative bias voltage …
-
Study of Moiré Superlattices on Twisted Hexagonal Boron Nitride: Kelvin Probe Force Microscopy and an Atomistic Model
… potentials can be quantified using scanning probe techniques such as Kelvin Probe Force Microscopy. This thesis reports on the results of Kelvin Probe Force Microscopy experiments done on twisted stacks of h-BN wherein we observed a dependence between moiré superlattice potential depth and …
-
Probing charge motion in next-generation semiconductors with scanned probe microscopy
Scanned probe microscopy has allowed researchers to explore spatial variations in charge generation and transport in solar-cell films prepared on a conductive substrate with a best-case resolution of 2 nanometers. In this thesis, we introduce new scanned probe measurements to measure light- and …
-
Effects of stray fields on ionization of Rydberg atoms near gold surfaces
… gold surface evaporated on mica is measured with Kelvin probe force microscopy. The stray fields generated by the surface potential are calculated. Simulation with C++ and Matlab predicts how stray fields affect the ionization of Rydberg state atoms near a gold surface. The predicted survival …
-
CHARACTERIZATION OF THE MULTIFUNCTIONAL PROPERTIES OF ZINC OXIDE BASED MATERIALS BY SCANNING PROBE MICROSCOPY TECHNIQUES
… were mainly based on various advanced Scanning Probe Microscopy (SPM) techniques, including Piezoresponse Force Microscopy (PFM), conductive Atomic Force Microscopy (c-AFM) and Kelvin Probe Force Microscopy (KPFM).
-
IMPACTS OF PRECIPITATES AND ELECTROCHEMICAL ASPECTS OF LOCALISED CORROSION IN INDUSTRIAL ALLOYS
… 20%-85% RH. <i>In-situ</i> time-lapse Scanning Kelvin Probe Force Microscopy (SKPFM) elucidated, for the first time, silicide regions, which initially showed positive Volta potential (vs matrix), suffering from severe nobility loss due to ongoing physicochemical and electrochemical corrosion …
Page 1 of 6