Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 389 for “"Kiln"”.
-
Industrial rotating kiln simulation
… oil shales. As part of this process, a rotating kiln is used to pyrolyse the organic component of the oil shales. The configuration and application of this rotating kiln is unique and hence previous rotating kiln models cannot be used to predict the solid behaviour in the current processor. It is …
-
Building a bisque kiln
The electric kiln in the studio of the ceramic artist is one of many important and significant pieces of equipment. It is the goal of this paper to provide a guide to anyone who needs to repair, rebuild, or build from scratch an entire kiln. These step-by-step instructions for building a kiln from …
-
A temperature controller for firing a kiln
… controller which controls the firing of a kiln. The standard industrial temperature controller is designed to maintain a constant temperature close to a set point selected by the operator. A kiln cannot be fired independently with such a control. During the firing of earth materials, water …
-
Convective heat transfer in a rotary kiln
Convective heat transfer in a rotary kiln was studied as a function of operating parameters. The experiments were carried out in a steel kiln of 0.19 m in diameter and 2.44 m in length. The operating parameters covered included gas flow rate, solid throughput, rotational speed, degree of solid …
-
Fluid flow and combustion in rotary kiln
… of minerals and materials within rotary kilns involves energy generation by combustion and its subsequent heat transfer (by turbulent diffusion and radiation) to the charge (the bed) and refractory walls. Thus, by influencing heat transfer, flame behavior and the combustion process can …
-
The train kiln: Preparation, construction and firing.
… building and firing of a special type of wood kiln called a train kiln, or coffin kiln. I designed the kiln using the materials that were available to me at little or no cost. My goal in this project was to design and build an efficient, user-friendly kiln, which produces unique results on …
-
Gas phase dispersion in a small rotary kiln
… was made of nonideal flow of gas in a rotary kiln reactor. A rotating tube 0.165 m in diameter by 2.17 m long, with internal lifting flights, was operated at room temperature. Rotational speeds from 2.0 to 7.0 rpm, air flow rates from 0.351 to 4.178 m<sup>3</sup>/h, and solid contents of 0.0, …
-
Kiln drying optimization for quality hem-fir lumber
… moisture content variation within and between kiln dried hem-fir lumber. There were two research phases. The first (without sorting), aimed to develop a modified drying schedule whereas in the second, the developed schedule was used along with a standard industrial schedule. Additionally, there …
-
Eight Cone Six Glazes for the Electric Kiln
… F) ceramic glazes to be used in an electric kiln. These glazes were developed from a scientific approach in which the basic formula was calculated on paper. From these base formulas a trial and error approach was taken in which the basic chemicals were then adjusted until the desired esthetic …
-
A time-based computer controlled dry kiln system
A computer controlled dry kiln system, designed and assembled at Virginia Tech, was used in a comparison study of end check damage and acoustic emission count rate for red oak wood samples using two variations of a drying schedule based upon a standard 4/4 red oak drying schedule (T4D2). Time was …
-
Dry kiln control by electrical resistance moisture meter
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Forest Products, 1962
-
Glaze formulation at stoneware temperatures for the electric kiln
… for stoneware temperatures in an electric kiln. The specific objectives are: to formulate a workable glaze for cone 8 oxidation; to introduce metallic oxides to a base glaze to achieve color variation; and to test and evaluate each color variation on three different clay bodies. The work …
-
Direct reduction of iron ore in a rotary kiln
… iron ore was reduced successfully in a rotary kiln with a gaseous reactant which was prepared by reforming butane within the kiln, using the beneficial effect of iron/iron oxide as an autocatalyst. The optimum ratio of the gaseous reactants, H2/CO2/C4H10, was used to prevent undesirable soot …
-
Characterization of cement-kiln-dust stabilized base/subbase aggregate.
… modulus and other properties of a cement-kiln-dust (CKD) stabilized aggregate that are important to the design and rehabilitation of roadway pavements. Meridian limestone aggregate, which is considered to be of substandard quality and unsuitable for highway base course was tested for its …
-
Modelling of heat recovery in LKAB's grate-kiln process
… energy efficiency measures in the grate-kiln process for iron ore production; specifically, how waste heat contained in flue gas could be recirculated in order to achieve a decrease in specific fuel consumption. Consequently, fossil carbon emissions would be reduced as the grate-kiln …
Page 1 of 20