Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"LBSF"”.
-
Direct writing for silicon wafer solar cells
… films of aluminium local back surface field (Al-LBSF) solar cells. A new method is presented to geometrically confine directly deposited features on hydrophilic rough surfaces. The direct patterning technique is applied to the fabrication of Al-LBSF solar cells, resulting in cell efficiencies of …
-
Rear Local Contact Formation for High-efficiency Crystalline Silicon Wafer Solar Cells
… thesis the local contact formation for p-type Al-LBSF (Aluminium Local Back Surface Field) solar cells and n-type PERT (Passivated Emitter Rear Total diffused) solar cells is investigated in detail. For p-type Al-LBSF cells, it is found that the rear local opening pattern and Al thickness have a …
-
Simulation and process development for ion-implanted N-type silicon solar cells
… cell structures, cells featuring a local BSF (LBSF) have demonstrated some of the highest efficiencies seen to date. Implementation of this technology in industry, however, has been limited due to the cost involved in implementing the photolithography procedures required. Recent advances in …
-
PULSED LASER PROCESSING FOR HIGH EFFICIENCY SILICON WAFER SOLAR CELLS
… of aluminium local back surface field (Al-LBSF) solar cells. The work predominantly focuses on laser induced damage to the silicon and post-laser methods that mitigate the impact of laser induced defects on the final solar cell performance. Finally optimised laser conditions were used to …
-
High efficiency rear a-Si:H/SiNx:H passivated local-contacted P-type CZ silicon solar cells
… to form high quality local back surface field (LBSF) through the a-Si:H/SiNx:H stack. The quality of the LBSF, including the sheet resistance (R□), doping profile and the recombination properties of the laser-doped LBSF were investigated in a wide range of laser parameters to optimize the …
-
Anodic oxide rear contact schemes for silicon solar cells
… on the properties of local back surface fields (LBSF) regions formed by aluminium alloying. Chemical etching resulted in 2 - 3 µm thicker LBSF regions and reduced Kirkendall void formation. This understanding inspired the development of a new inkjet etching patterning technique for patterning …
-
Heat transfer to non-Newtonian fluids in turbulent flow
… investigated over the range of 0.00008 to 0.002 lbsf x sec<sup>n'</sup>/ft<sup>2</sup>. The Reynolds number varied between 2200 to 25,000.</p><p>Two methods of correlating film coefficients which have been previously developed were examined. Improvement in the reliability of correlation is …
-
ULTRA-SHORT PULSE LASER ABLATION FOR HIGH-EFFICIENCY SILICON WAFER SOLAR CELLS
… for Aluminium Local Back Surface Field (Al-LBSF) solar cells. The gentle regime led to efficiencies of up to 21%, whereas the strong regime led to degraded cell parameters. A loss analysis was carried out to identify the mechanisms causing cell degradation in the strong regime.
-
Overcoming the performance limitations of industrial silicon solar cell by laser doping technology
… on the dielectric layers or forming local BSF (LBSF) without massive jeopardize passivation ability using industry suitable approach rather than expensive photolithograph which is normally employed in laboratory. As a local heating process, laser doping could achieve dopants diffusion and …