Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"LOW-VOLUME ROADS"”.
-
Foundation Design of Low Volume Roads: Evaluation and Performance
A majority of roads in the state of SD are low volume roads (LVRs). The SDDOT has developed simplified methods for LVR pavement thickness selection. These guides allow users to obtain recommended asphalt surfacing and base course layer thickness based on the subgrade support and the average daily …
-
Field testing of railroad flatcar bridges on low-volume roads
… flatcars (RRFCs) as the superstructure for low-volume road bridges has been investigated in previous research. In this research, the RRFC bridge concept was expanded to investigate additional construction variables, methods to improve performance and reduce cost, as well as refining the …
-
Landslide Remediation Methodology For Low-Volume Roads In North-Central Pennsylvania
… remediation methodology for landslide-prone and low-volume forest roads in the region can benefit from targeted and innovative engineering design strategies. Rockery walls may be an underutilized remediation methodology for low-volume forest roads in north-central Pennsylvania. Two landslide …
-
High Reclaimed Asphalt Pavement (RAP) Asphalt Mixtures for Low Volume Roads
… in the production of asphalt mixtures for low volume roads represents an environmental solution that manages to reduce waste and demand of fossil derivate products, and at the same time provides an opportunity for local agencies to optimize roadway construction and maintenance budgets. The …
-
Fly ash mixtures as flexible structural materials for low-volume roads
… natural stone materials in the applications for low-volume roads. The research and studies have succeeded in the development of new materials and structure applications for low-volume roads, proper equipment and work methods to manufacture the NRC-structures and proper test methods for the …
-
Field testing of multiple span railroad flatcar bridges on low volume roads
<p>The use of railroad flatcar (RRFC) bridges on low-volume roads was investigated in research conducted by the Bridge Engineering Center at Iowa State University. Previous research has demonstrated the feasibility, constructability, adequacy, and economy of using RRFC bridges, especially for use …
-
Investigating Impacts of Spring Thaw on Ontario Low-Volume Roads for Improved Asset Management
… begins thawing. To minimize pavement damage, low- volume roads rely on Spring Load Restrictions (SLR), since building these roads to withstand spring thaw is usually not feasible. However, implementing SLR increases operational costs to commercial transporters and impacts local economies. The …
-
Development of holding strategies for deteriorated low-volume roads and evaluation of performance of Iowa test sections
… pavement maintenance and the growing number of roads that are due for major rehabilitation or reconstruction. Funding priority is usually given to those roads that are part of the National-Highway-System (NHS). Rural low-volume roads (LVR) are usually not included in the NHS and may be managed …
-
The Effect of Mineral Filler, Asphalt Content, and Curing Time on the Properties of Cold Mixes When Used for Low-volume Roads
… emulsified asphalt-aggregate cold mixes used in low-volume road by utilizing Marshall equipment. One aggregate type (quartzite) and one type of asphalt emulsion (CSS-1) were used. Sixty specimens were prepared and tested in accordance with the procedure developed by the Asphalt Institute …
-
Developing a Design Procedure for Pavement Millings for New and Rehabilitated Unpaved Gravel Roads
… asphalt pavement (RAP) millings to surface low volume roads for more than two decades. The design of millings surfaced roads has been done based on field experience. The primary objective of this study was to provide design guidelines for construction and rehabilitation of millings surfaced …
-
Examination of Potential Cost Benefits for Converting Surfaced Roads to Unsurfaced Roads in Texas
… un-surfaced may be a more economical option for low-volume roads. In Texas, TxDOT manages tens of thousands of miles of low-volume roads, and wishes to know if conversion of those roadways could save significant money in maintenance over time. This paper describes the practice of conversion as it …
-
Comparison of 19mm Superpave and Marshall Base II mixes in West Virginia
… regarding implementation of Superpave for low volume roads in WV is still under review.;The primary objective of this research work was to compare the 19mm Superpave and Base II Marshall design mixes in WV to supplement information required for WVDOH to make a suitable decision regarding …
-
ANALYTICAL PROCEDURE FOR EVALUATING ROADWAY UPGRADING STRATEGY FOR LOW-VOLUME HIGHWAYS.
… for determining the optimal timing for upgrading low-volume roads in developing countries. Most roadway upgradings from gravel to surface treated and to asphaltic concrete are carried out when total transport cost on a road becomes high as a result of high traffic and the consequent rapid …
-
Resilient roads for the future: Localized design, sustainable materials, and climate-adaptive pavement solutions
… performance, durability, and sustainability of low-volume roads using scientific design methods, innovative material-stabilization techniques, and advanced modeling to understand, predict, and mitigate the detrimental effects of moisture on structural integrity of pavement under adverse climatic …
-
Using Road Weather Information Systems (RWIS) to optimize the Scheduling of Load Restrictions on Northern Ontario's Low-Volume Highways
… the Northern part of the Province, Ontario’s low-volume roads provide a link from remote resource areas to markets. Thus, preserving this transportation asset from the two main sources of pavement deterioration, namely traffic loading and the environment is extremely critical to the movement …
-
Feasibility of using railroad flatcars for low volume road bridges
… engineers, this investigation focuses on a low cost bridge alternative that consists of using railroad flatcars (RRFC) as the bridge superstructure. The intent of this study is to determine whether these types of bridges are structurally adequate and potentially feasible for use on low …
-
Construction and testing of a low volume road bridge alternative: Steel-beam precast units
… published in the November 1998 issue of "Better Roads" stated that 35% of all city, county, and township bridges in the United States are considered structurally deficient or functionally obsolete. In Iowa, approximately 6,600 of the 21,118 such bridges are either structurally deficient or …
-
Laboratory performance of early cured asphalt emulsion treated base for cold regions
… supplying hot mix is not economical. However, at low temperatures, Emulsion Aggregate Mixtures (EAM) show low strength at early ages and require a longer curing time for asphalt emulsions to break. In this study, a proposed dense-graded gravel base was treated with SS-1 emulsion. In order to …
-
Hydraulic modeling and performance evaluation of low water crossings in Illinois
… are many old and aging bridges, culverts, and low water crossings on rural low-volume roads that need to be replaced. Low water crossings (LWCs) have been used as an economical alternative to culverts and bridges, designed without overtopping, on low-volume roads where there is a low number of …
-
Laboratory and field testing and evaluation of precast bridge elements
… five to six precast MBISB panels and is used on low-volume roads, on short spans, and is installed and fabricated by county forces. Precast abutment caps and a precast abutment backwall were also developed by BHC for use with the PMBISB. The objective of the research was to gain knowledge of the …
Page 1 of 3