Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 354 for “"LRFD"”.
-
LRFD design of double composite box girder bridges
Conventional continuous steel bridges only exhibit composite behavior in the positive moment region. Similar composite action may also be achieved in the negative moment region by casting a bottom concrete slab between the points of inflection. Such a section is referred to as "double composite" …
-
Building better confidence intervals for the resistance factor in LRFD
Engineers employ the LRFD model system in the planning and development of structures (e.g. bridges, highways, buildings). The system takes into account the load the structure will bear and the resistance of the structure against that load. Of interest in the LRFD system is the resistance factor (φ) …
-
AISC LRFD and ASD code check program for MSC/Nastran
Master of Science (M.S.)
-
VERIFICATION OF SHAFT FOUNDATION LRFD DESIGN USING FINITE ELEMENT METHOD
… against structural fatigue proposed from AASHTO LRFD Specification for Structural Supports for Highway Signs, Luminaries, and Traffic (2015). The primary object of this research is to evaluate the adequacy of the current shaft foundation design procedure. The shaft foundation verification …
-
LRFD evaluation of full-scale metal building rigid frame tests
… linearly elastic frame analyses and 1993 AISC LRFD Specification strength checks. It was concluded that standard analysis procedures are very accurate when applied to rigid frames such as the ones in this study. The provisions concerning lateral-torsional buckling of singly-tapered segments …
-
Implications of P-Delta analysis and LRFD of gable frames
Recent developments in the philosophy of structural steel design have led to design specifications that incorporate second-order geometric effects. The use of second-order elastic analysis (SOEA) in the design of structural frameworks may lead to more economically designed structures and increased …
-
LRFD Calibration of Bridge Foundations Subjected to Scour and Risk Analysis
… Load and Resistance Factor Design (LRFD) for shallow and deep foundations subjected to scour. The goal is to provide a design procedure for the bridge foundations, where the reliability of the foundation is the same with or without scour. For shallow foundations, the key of the …
-
Experimental and analytical investigation of the LRFD strength of tapered members
… of this study was to investigate the AISC LRFD strength of the rigid knee portion of gable frames. The experimental portion of this study was sponsored by Kawada Industries, Inc., Costa Mesa, California. Eight specimens consisting of a tapered column and a portion of the tapered rafter were …
-
Assessment of aashto-lrfd provisions for the design of prestressed concrete bridges
Master of Science (M.S.)
-
Axially Loaded Drilled Shafts: LRFD Resistance Factor Calibration and Predictive Techniques for Settlement
… While the calibration of area-specific LRFD resistance factors for the strength limit state offers a potential solution to this issue, current calibration methods require that traditional or local design procedures be capable of predicting nominal capacity with a reasonable and …
-
Load and Resistance Factor Design (LRFD) Resistance Factors for Tip Grouted Drilled Shafts
… the research did not recommend safety factors or LRFD resistance factors for use in design, in fact, 13 years after the new design method and after hundreds of projects employing its use domestically and worldwide there were no published resistance factors for post grouted end bearing resistance …
-
Improving Confidence Intervals for the Resistance Factor in Load and Resistance Factor Design (LRFD)
… the loads. Load and Resistance Factor Design (LRFD) is a reliability-based design used by structural engineers which considers the loads and the resistance to be independent random variables. LRFD aims to design structural elements with a target probability of failure by trying to prevent limit …
-
Target level of reliability for design of bridge foundations and approach embankments using LRFD
Levels of reliability (safety) for civil engineering designs are normally established from historical precedent, by specification committees, or based on the variability of loads and resistances. It is common to establish a single target level of reliability for all structures of similar type based …
-
Impact of AASHTO LRFD specifications on the design of precast, pretensioned u-beam bridges
… will make transition to the use of the AASHTO LRFD Bridge Design Specifications before 2007. The objectives of this portion of the study are to evaluate the current LRFD Specifications to assess the calibration of the code with respect to typical Texas U54 bridge girders, to perform a critical …
-
Cost-Benefit Analyses for Load Resistance Factor Design (LRFD) of Drilled Shafts in Arkansas
… developed for load resistance factor design (LRFD) designed drilled shaft foundations, were designed to compare the fiscal impacts of the drilling and sampling, in-field and laboratory testing, full-scale load testing, and concrete mixing techniques utilized by the University of Arkansas …
-
Capacity reduction and fire load factors for LRFD of steel members exposed to fire
Thesis (Ph. D.)--Michigan State University. Civil Engineering, 2010
-
Numerical Study and Load and Resistance Factor Design (LRFD) Calibration for Reinforced Soil Retaining Walls
Load and resistance factor design (LRFD) (often called limit states design (LSD)) has been mandated in the AASHTO Bridge Design Specifications and will be adopted in future editions of Canadian Highway Bridge Design Code for all transportation-related structures including reinforced soil retaining …
-
Reliability of shallow foundations designed using LRFD considering uncertainty from different numbers of strength measurements
… using load and resistance factor design (LRFD). Several alternative methods, including a new proposed method, to practically account for the uncertainty in soil design parameters were evaluated for designs using small numbers of measurements. Results show that design parameters are largely …
-
Comparison of LRFD and allowable stress design criteria for the design of multi-story frames
… of limit states. The main difference between LRFD and the traditional Allowable Stress Design method is the use of load and resistance factors, which account for the variability of parameters affecting the design. The purpose of this study is to compare both design methods. To do so, a …
Page 1 of 18