Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"LS-DYNA3D"”.
-
LS-DYNA3D Modeling and Simulation for Uncontained Engine Debris Impact on Fuselage Skins
… debris on fuselage skins are simulated using the LS-DYNA3D finite element analysis code. The LS-DYNA3D code is a nonlinear transient dynamic simulation tool with contact algorithms for impact. A finite element analysis is used to simulate the penetration of aluminum plates impacted by titanium …
-
Evaluation of finite element analysis techniques applied to a floating offshore wind turbine
… energy and converting it to electricity. The LS-DYNA3D explicit finite element analysis programme is used in performing the evaluation of the analysis and in creating a full scale model typical to the one evaluated. The developed model (case study) is a 1.4MW power rated floating 3 blades …
-
School bus crashworthiness
… bus. IDEADYN was used as a translator to write a LS-DYNA3D input file. Full frontal and offset frontal impacts were simulated in LS-DYNA3D with an initial velocity of 56 km/hr against a rigid wall. Since hourglassing energy was high in the previous results, a higher order integration was done for …
-
Numerical modeling of air blast effects on hybrid structures
… for concrete is presented. This model, used in LS-DYNA3D, incorporates tensile damage, which allows the concrete to degrade as it is loaded. The concrete model is tested using existing unreinforced and reinforced concrete beam tests. Some beams were plain, others were externally reinforced with …
-
Development and simulation of energy-absorbing guardrail terminal
… vehicle. A nonlinear finite element code, LS-DYNA3D, was used to simulate the cutting phenomenon. The model consisted of fully integrated solid elements in conjunction with an elastic-plastic material model with strain based failure. A very fine mesh with multiple elements through the …
-
Crashworthiness of Side Impact Beams
… Ansys v5.4 was used for the static FEA while LS-Dyna3D v940 was used for the dynamic FEA.;The objectives of the project were to assess and then model the behaviour of the steel and composite side impact beams. This behaviour is in terms of both the beams' static and impact response. The beams …
-
Effect Of Childhood Obesity On Risk Of Pelvic Bone Fracture In Simulated Sideways Fall
… of pediatric pelvic bone fracture in sideways falls using computational modeling and simulation considering various levels of obesity. Two sets of models were developed and tested. The first set was body component models. Several 10-year-old pelvis-femur complex models were developed. The models …
-
Computational model of ductile erosion by single particle impact
… working environment. But with so many new materials being used for different applications, and operating at different temperatures, conducting experiments for each of them is becoming increasingly difficult. In this thesis, use of a finite element model was proposed, which takes into account …
-
Dynamic response of the human skull-brain complex to impact: Points of maximum stress and pressure.
… motions in the skull and brain mass. The models include cerebral spinal fluid and meningi membrane along with the skull and the viscoelastic brain tissue. The analysis is performed using the program LS-DYNA3D for the analysis of frontal, lateral and top impact. The results produced include the …
-
Particle breakage in sand blasting due to impact on ductile materials
… model of the sand particle is developed in LS-INGRID and a transient dynamic analysis is performed in LS-DYNA3D. This study focuses mainly on the propagation of stress waves and the volume loss of the sand particle upon impacting an aluminum plate. Three different shapes of the sand particle …
-
Failure mechanisms in impact erosion of ductile materials
Solid particle erosion in ductile materials is a common problem in many industrial applications. It is defined as material loss resulting from the mechanical contact between the particle and the metal surface. Many experimental studies were reported in the past to determine the loss of the material …
-
Finite Element Analysis of Ship Collisions
… using the explicit non-linear FE code LS-DYNA3D. Various modeling alternatives are considered. The ability to model a complete ship-to-ship collision is developed incrementally starting with bow collisions with a rigid wall. A super-element (intersection model) approach is considered to …
-
Computational models of particle size effects on brittle oxide scale erosion
Metals and alloys designed for machines at elevated temperatures have microstructures and chemistries optimized to provide strength and resistance to oxidation. The majority of the commercial high temperatures metal or alloys intended to use at temperatures below 850°C or so rely on the formation …
-
A physically-based continuum damage mechanics model for numerical prediction of damage growth in laminated composite plates
Rapid growth in use of composite materials in structural applications drives the need for a more detailed understanding of damage tolerant and damage resistant design. Current analytical techniques provide sufficient understanding and predictive capabilities for application in preliminary design, …
-
Numerical Study On Reinforcement Mechanism Of Copper/carbon Nanotubes Composite
… as one of the widely used reinforcement materials in the metal matrix composites. In this thesis, finite element (FE) models were built in Ls-Dyna3D to simulate Copper/CNTs composite deformation and fracture, and to explore CNTs reinforcement mechanisms. Several possible mechanisms were …
-
Finite element simulation of hip joint replacement under static and dynamic loading
… are interpreted in the context of failure models of the component materials, significant advantages can be made in our ability to design these devices. The artificial hip joint is used throughout as an example. The finite element method was used as a structural analysis tool and its …
-
Attachment, gender, and personality: An exploration into the affective components of adult attachment in a non-clinical sample.
… of Negative Emotionality and Conflict were also associated in a positive direction. Inverse relationships were found between Negative Emotionality Positive Emotionality and Total Self-Concept. Gender and its discrimination by the attachment type measures were explored. To address the main …