Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"LaModel"”.

  1. Calibrating LaModel for Subsidence

    LaModel uses a laminated overburden boundary-element model and can not only calculate seam-level stresses and displacements but also surface subsidence for thin tabular deposit such as coal seams. Up to this point, the material property wizards in LaModel were primarily designed for calculating …

    wvu Repository record for Calibrating LaModel for Subsidence (opens in a new tab)

  2. Integrating the LaModel and ARMPS Programs (ARMPS-LAM)

    … years, the various versions of the ARMPS and the LaModel programs have been widely used in the U.S. coal fields. In a recent deep-cover database analysis, LaModel was found to more accurately classify a small deep-cover database than ARMPS. However, the LaModel analysis of each case study required …

    wvu Repository record for Integrating the LaModel and ARMPS Programs (ARMPS-LAM) (opens in a new tab)

  3. The Online LaModel User's & Training Manual Development & Testing

    … and comprehensive online training course for LaModel has been developed in an open online learning environment. The online user's manual provides widespread access to detailed information on the installation, proper use, and troubleshooting procedures through a combination of: written …

    wvu Repository record for The Online LaModel User's & Training Manual Development & Testing (opens in a new tab)

  4. Implementing the Local Mine Stiffness Calculation in LaModel

    … the local mine stiffness calculation into LaModel. Also, as an integral part of this implementation, an improved method for generating strain-softening pillar behavior based on extensive field data was developed and updated. The implementation of the local mine stiffness and …

    wvu Repository record for Implementing the Local Mine Stiffness Calculation in LaModel (opens in a new tab)

  5. Implementing a Parametric Analysis in the LaModel 3.0 Program

    This thesis presents a parametric analysis in the LaModel 3.0 software and its corresponding results by showing how changes to input variables would affect the output of the model. This analysis was performed by taking of the most important inputs of the model and varying them inside a predefined …

    wvu Repository record for Implementing a Parametric Analysis in the LaModel 3.0 Program (opens in a new tab)

  6. Implementing energy release rate calculations into the LaModel program

    … ERR calculation is incorporated into the modern LaModel computer program to facilitate an analysis for potential coal bumps. Initially, the ERR calculations in LaModel are verified using a case study of cut sequences originally modeled using the MULSIM/NL computer program. Then, the ERR …

    wvu Repository record for Implementing energy release rate calculations into the LaModel program (opens in a new tab)

  7. Calibrating the LaModel Program for Shallow Cover Multiple-Seam Mines

    … mining was developed and implemented into the LaModel 3.0 program a few years ago (Heasley et al., 2010). This calibrated method was demonstrated to have very good results with a limited database of 47 deep-cover case histories, where a stability factor (SF) of 1.40 or above showed a 90% chance …

    wvu Repository record for Calibrating the LaModel Program for Shallow Cover Multiple-Seam Mines (opens in a new tab)

  8. Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability

    … and the Boundary Element Method software (BEM), LaModel, to allow stone mine operators to assess the impact of the large discontinuities on local pillar stability. National Institute for Occupational Safety and Health (NIOSH) published design guidelines for underground stone mines to guide the …

    wvu Repository record for Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability (opens in a new tab)

  9. Implementing the Empirical Stone Mine Pillar Strength Equation into the Boundary Element Method Software LaModel

    … pillar wizard,” which will be implemented into LaModel's preprocessor, Lampre, is developed using the derived equations to obtain the Stone Pillar material properties. Using the new stone pillar wizard in Lamodel, the pillar stress distribution, pillar safety factors, overburden stress, and all …

    wvu Repository record for Implementing the Empirical Stone Mine Pillar Strength Equation into the Boundary Element Method Software LaModel (opens in a new tab)

  10. Developing and implementing new algorithms into the LaModel program for numerical analysis of multiple seam interactions

    … as well as some specific limitations. The LaModel program was developed based on the displacement discontinuity method and has been successfully used over several years in mining industry.;During the last few years, several features have been added to the LaModel program to increase the …

    wvu Repository record for Developing and implementing new algorithms into the LaModel program for numerical analysis of multiple seam interactions (opens in a new tab)

  11. Enhancing Pillar Stability Assessment in Underground Limestone Mines Using LaModel: Integrating Empirical Strength Equations for Improved Ground Control

    … mine geometries and variable topographies. LaModel, a displacement-discontinuity boundary element method software traditionally used in coal mining, has recently been applied to stress analysis in stone mines. This research aims to investigate LaModel's applicability further. A case study of …

    wvu Repository record for Enhancing Pillar Stability Assessment in Underground Limestone Mines Using LaModel: Integrating Empirical Strength Equations for Improved Ground Control (opens in a new tab)

  12. Geology Oriented Loading Approach for Underground Coal Mines

    … accuracy and the other cases were tested for LaModel implementation. The percentages of load carried by the gob as estimated by the new method were implemented into the LaModel program by simply entering it into the material wizard and re-calculating the required gob modulus to achieve the …

    wvu Repository record for Geology Oriented Loading Approach for Underground Coal Mines (opens in a new tab)

  13. New Abutment Angle Concept for Underground Coal Mining

    … Analysis of Longwall Pillar Stability (ALPS) and LaModel programs, the magnitude of the abutment loading adjacent to a gob area is calculated using an "abutment angle" concept, and the extent of the abutment loading is determined as solely a function of depth from an empirically derived equation. …

    wvu Repository record for New Abutment Angle Concept for Underground Coal Mining (opens in a new tab)

  14. Stability Analysis of Bleeder Entries in Underground Coal Mines Using the Displacement-Discontinuity and Finite-Difference Programs

    … programs (a) displacement discontinuity program-LaModel and (b) the finite difference program-FLAC were used to investigate these problems. Modeling results from the LaModel program indicated that the vertical stresses in bleeder pillars would first increase and then remain unchanged during …

    wvu Repository record for Stability Analysis of Bleeder Entries in Underground Coal Mines Using the Displacement-Discontinuity and Finite-Difference Programs (opens in a new tab)

  15. A simple two-dimensional boundary element program for estimating multiple seam interaction.

    … study was performed using the full-featured 3D LAMODEL program and the simplified 2D LaM2D program. The comparative case study is an analysis of a longwall panel undermining an active room-and-pillar main line development. In this comparative case study, the total parameter input and solution of …

    wvu Repository record for A simple two-dimensional boundary element program for estimating multiple seam interaction. (opens in a new tab)

  16. An Area-Based Calculation of the Analysis of Roof Bolt Systems (ARBS)

    … as obtained by the boundary-element program LaModel and is converts them to a "pseudo-depth" which is used as the depth input to the ARBS calculations. In addition, available geologic data at the mine can be used to determine an area-based CMRR, and mine design information can be used to …

    wvu Repository record for An Area-Based Calculation of the Analysis of Roof Bolt Systems (ARBS) (opens in a new tab)

  17. Adaptation of Coal Mine Floor Rating (CMFR) to Eastern U.S. Coal Mines

    … analyzed through boundary element model software LaModel. After modifying the CMFR system, a better separation of failure and non-failure cases from one another is observed and an applicable rock mass classification system capable of predicting potential floor failures in the U.S. is proposed.

    wvu Repository record for Adaptation of Coal Mine Floor Rating (CMFR) to Eastern U.S. Coal Mines (opens in a new tab)

  18. Integrated stability mapping system for mines

    … from present mine maps easily and directly. The LaModel stress calculation, a boundary element method, integrated within the mapping system can produce realistic and accurate stress and displacement analysis with its distinguished features such as the laminated overburden model, the true …

    wvu Repository record for Integrated stability mapping system for mines (opens in a new tab)

  19. Quantitative Comparison of Seismic Velocity Tomography With Seismic Activity Around a Deep Coal Longwall Panel

    … using the boundary element modeling program LAMODEL to study the effects of three backfilled cross panel entries which were located ahead of the mining face. The modeling showed similar vertical stress distributions as a panel without cross panel entries but higher stress magnitudes. The …

    vt Repository record for Quantitative Comparison of Seismic Velocity Tomography With Seismic Activity Around a Deep Coal Longwall Panel (opens in a new tab)