Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 80 for “"Laboratory Performance"”.

  1. The reliability of laboratory performance testing

    The reproducibility of a measurement in a laboratory test impacts on the power of that test to detect the small, but significant changes in an athlete's performance when determining the influence of a new training or nutritional intervention. Until recently, however, sport scientists have not been …

    cape-town Repository record for The reliability of laboratory performance testing (opens in a new tab)

  2. Laboratory performance of recycled asphalt concrete

    For the past 20 years, many states have been aware of the need for the rehabilitation of old asphaltic roads. It has been known that the materials in place, aggregate and asphalt, were free and reusable but the cost of removing and replacing was considered marginal in starting anew. Consequently …

    nps Repository record for Laboratory performance of recycled asphalt concrete (opens in a new tab)

  3. Laboratory Performance of Geosynthetic-Stabilized Pavement Sections

    … were performed to evaluate the comparative performance of pavements with and without geosynthetic stabilization. This was accomplished by the testing of a total of 18 pavement sections which could be classified into four different types: one which was constructed without geosynthetics and …

    vt Repository record for Laboratory Performance of Geosynthetic-Stabilized Pavement Sections (opens in a new tab)

  4. Laboratory performance of geogrid and geotextile reinforced flexible pavements

    … were evaluated to determine potential benefits. Laboratory pavement sections were constructed, tested, and analyzed to assess the performance of reinforced pavement sections compared to sections without geosynthetic reinforcement. The pavement sections were designed to model a typical low-volume …

    vt Repository record for Laboratory performance of geogrid and geotextile reinforced flexible pavements (opens in a new tab)

  5. Laboratory performance of early cured asphalt emulsion treated base for cold regions

    Asphalt emulsions as an alternative for stabilizing base layers can be cost effective especially in cold regions where supplying hot mix is not economical. However, at low temperatures, Emulsion Aggregate Mixtures (EAM) show low strength at early ages and require a longer curing time for asphalt …

    manitoba Repository record for Laboratory performance of early cured asphalt emulsion treated base for cold regions (opens in a new tab)

  6. Field and laboratory performance of prestressed high performance concrete girders for Missouri bridge structures

    "The first fully high performance concrete (HPC) bridge A6130 was constructed in Missouri utilizing concrete with 56 day design strength of 70 MPa (10,152 psi) and 15.2 mm (0.6 in.) diameter prestressing strands. HPC materials for both girders and cast-in-place deck were studied for both mechanical …

    must-thes Repository record for Field and laboratory performance of prestressed high performance concrete girders for Missouri bridge structures (opens in a new tab)

  7. THE LABORATORY PERFORMANCE AND AGING CHARACTERISTICS OF RUBBER MODIFIED ASPHALT MIXTURE USING A DRY PROCESS

    … of waste tire on the environment and improve the performance of the pavement as well. The application of crumb rubber on the pavement using the dry process was proved to be a cost-effective strategy in some projects, however, the interaction between the rubber and asphalt binder was unknown in the …

    mtu Repository record for THE LABORATORY PERFORMANCE AND AGING CHARACTERISTICS OF RUBBER MODIFIED ASPHALT MIXTURE USING A DRY PROCESS (opens in a new tab)

  8. Heat curing method and laboratory performance evaluation of subgrade soil stabilized with bentonite and magnesium alkalinization

    … are limited. Besides, the properties and performance of alkalinization process are dominated by several factors mainly initial curing conditions, concentration of alkaline activators and composition of materials. This study is aimed to investigate the effect of curing condition …

    ubc Repository record for Heat curing method and laboratory performance evaluation of subgrade soil stabilized with bentonite and magnesium alkalinization (opens in a new tab) Download PDF for Heat curing method and laboratory performance evaluation of subgrade soil stabilized with bentonite and magnesium alkalinization (opens in a new tab)

  9. Evaluation of impact of fiber type and dosage rate on volumetrics and laboratory performance of asphalt mixtures

    … dosage rates on the volumetric properties and laboratory performance of asphalt mixtures. One asphalt mixture (control) and four fiber types (Fiberglass, Basalt, Carbon, and Polyolefin/Aramid) were used to evaluate the impact of fiber types and dosage rates. Two mixing procedures for …

    rowan Repository record for Evaluation of impact of fiber type and dosage rate on volumetrics and laboratory performance of asphalt mixtures (opens in a new tab)

  10. Laboratory Performance Evaluation of Hot Mix Asphalt Mixtures With Incorporations of Different Recycled Plastic Additives Using the Dry Method

    … to provide a sustainable approach to improve performance. The materials were incorporated into two control mixtures designed with the Balanced Mix Design (BMD) method. Laboratory testing assessed cracking and rutting resistance, moisture susceptibility, abrasion resistance, and dynamic modulus …

    clemson Repository record for Laboratory Performance Evaluation of Hot Mix Asphalt Mixtures With Incorporations of Different Recycled Plastic Additives Using the Dry Method (opens in a new tab)

  11. Rutting Performance of Airport Hot-Mix Asphalt Characterized by Laboratory Performance Testing, Full-Scale Accelerated Pavement Testing, and Finite Element Modeling

    Hot Mix Asphalt (HMA) laboratory mixture design is intended to provide a durable, rut-resistant mixture for a given traffic type. Current mixture design procedures using the Superpave Gyratory Compactor (SGC) rely on volumetric properties of the compacted mixture to assure reliable performance; …

    tamu Repository record for Rutting Performance of Airport Hot-Mix Asphalt Characterized by Laboratory Performance Testing, Full-Scale Accelerated Pavement Testing, and Finite Element Modeling (opens in a new tab)

  12. Proficiency testing in clinical chemistry

    … in order to assess and improve the analytical performance of clinical laboratories. In particular, we will consider the CHEMPLUS proficiency testing program which has been developed by the Canadian Reference Laboratory (C.R.L.) The CHEMPLUS program is designed to assess the validity of clinical …

    ubc Repository record for Proficiency testing in clinical chemistry (opens in a new tab) Download PDF for Proficiency testing in clinical chemistry (opens in a new tab)

  13. External quality assessment in clinical chemistry: an examination of requirements, applications and benefits

    … care rather than as a method of 'policing' laboratory performance which is the objective of many national EQA schemes. The use of EQA in the assessment of interlaboratory agreement, of analytical methods, of individual laboratory performance, and of quality control and calibration materials …

    birmingham Download PDF for External quality assessment in clinical chemistry: an examination of requirements, applications and benefits (opens in a new tab)

  14. Effects of Mix Design Parameters on Indirect Tensile Strength and Field Cracking Performance of Asphalt Pavements

    … and rehabilitation expenses. Presently, no laboratory performance test is required by the Minnesota Department of Transportation (MnDOT) asphalt material specification, as part of acceptance criteria. This significantly increases the risk for poor transverse cracking performance. The …

    umn Repository record for Effects of Mix Design Parameters on Indirect Tensile Strength and Field Cracking Performance of Asphalt Pavements (opens in a new tab)

  15. PERFORMANCE ASSESSMENT OF FIBER-REINFORCED ASPHALT MIXTURES: A COMPREHENSIVE LABORATORY AND FULL-SCALE INVESTIGATION

    … these challenges and subsequently evaluate the performance potential of fiber-reinforced asphalt mixture (FRAM). For this purpose, different types of fibers (carbon, glass, basalt, and polyolefin/aramid (PFA), and Sasobit coated aramid (SCA)) were used and mixtures were prepared by using a …

    rowan Repository record for PERFORMANCE ASSESSMENT OF FIBER-REINFORCED ASPHALT MIXTURES: A COMPREHENSIVE LABORATORY AND FULL-SCALE INVESTIGATION (opens in a new tab)

  16. Evaluation of Balanced Asphalt Surface Mixtures with Conventional and High RAP Contents Using Laboratory and Accelerated Pavement Testing

    … certain traditional volumetric parameters with performance-based testing to address predominant distresses such as rutting and cracking. This approach offers an avenue to properly design and produce engineered asphalt mixtures, including those with high reclaimed asphalt pavement (HRAP) …

    vt Repository record for Evaluation of Balanced Asphalt Surface Mixtures with Conventional and High RAP Contents Using Laboratory and Accelerated Pavement Testing (opens in a new tab)

Page 1 of 4