Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Laboratory device"”.

  1. Evaluating the drainage performance of a wicking nonwoven geotextile-geogrid composite using a custom-built laboratory device

    … geotextile combined with a biaxial geogrid. Laboratory-scale model tests were conducted using a custom-built soil box to evaluate both gravity drainage and capillary-induced drainage setup. Poorly graded sand (SP) was selected for the experiments. Soils were compacted at the optimum moisture …

    manitoba Repository record for Evaluating the drainage performance of a wicking nonwoven geotextile-geogrid composite using a custom-built laboratory device (opens in a new tab)

  2. Strength size effect in asphalt binders and mixtures at low temperature

    … the use of very expensive and sensitive testing devices and present limitations in the extrapolation of results from laboratory specimens to larger structures such as full scale pavements. In this thesis the strength size effect of asphalt materials is investigated with the aim of addressing the …

    umn Repository record for Strength size effect in asphalt binders and mixtures at low temperature (opens in a new tab)

  3. Mathematical characterization of a microfluidic ultrasound driven transfection device.

    … the behavior of a microfluidic sonoporation device in order to understand how standing wave conditions influence molecular delivery to cells and determine whether the model predicts device performance. A prior model based on an ultrasonic separation cell that uses standing waves to separate …

    louisville Repository record for Mathematical characterization of a microfluidic ultrasound driven transfection device. (opens in a new tab)

  4. Deriving Sensitivity and Rapidity from the Clay Cutter Test: An Assessment of Remoulding Capacity and Rapidity Param eter Development

    … landslide risk assessments commonly involve laboratory and in situ investigations of soil conditions, where soil sensitivity is often estimated using the fall cone test (FC). However, this method is associated with known limitations, and the resulting parameters require empirical correction …

    chalmers Repository record for Deriving Sensitivity and Rapidity from the Clay Cutter Test: An Assessment of Remoulding Capacity and Rapidity Param eter Development (opens in a new tab)

  5. Wood grain direction measurement from spatial reflection with linear method

    … and dive angles that occur in practice. A laboratory device for making the required spatial reflection measurements is described and experimental results are presented. Based on the linear method, an equipment can be developed for industrial purpose, which consists of two parallel lines of …

    ubc Repository record for Wood grain direction measurement from spatial reflection with linear method (opens in a new tab) Download PDF for Wood grain direction measurement from spatial reflection with linear method (opens in a new tab)

  6. Three-Dimensional Spreading of Magnetic Reconnection Between Non-Parallel Flux Ropes with a Guide Field

    … interpreting both space weather phenomena and laboratory plasma dynamics. This study investigates the three-dimensional dynamics of reconnection in non-parallel flux ropes in the presence of a background magnetic field called a guide field, with particular emphasis on how reconnection spreads. …

    wvu Repository record for Three-Dimensional Spreading of Magnetic Reconnection Between Non-Parallel Flux Ropes with a Guide Field (opens in a new tab)

  7. Soil erosion processes and sediment enrichment in a well-aggregated, uniformly-textured oxisol

    … information on overall factors. A series of laboratory and field rainfall simulation experiments were conducted to study the mechanisms and processes of soil erosion and sediment enrichment from a well-aggregated, uniformly-textured Oxisol from the island of Oahu, Hawaii. Interrill splash and …

    hawaii Repository record for Soil erosion processes and sediment enrichment in a well-aggregated, uniformly-textured oxisol (opens in a new tab)

  8. High efficiency three terminal GaAsP/SiGe dual junction solar Cell on silicon substrate

    … over the present best monocrystalline Si laboratory device. The challenge is the lattice-mismatch between III-V material and Si. A leveraging technology of metamorphic silicon: germanium (SiGe) buffer between the Si and the III-V material provides a low-dislocation interface for III-V …

    unsw Repository record for High efficiency three terminal GaAsP/SiGe dual junction solar Cell on silicon substrate (opens in a new tab)

  9. LABORATORY EVALUATION OF COMPACTED DENSITIES OF BITUMINOUS MIXTURES

    … study was carried out to apply a non-destructive laboratory technique for density measurement of cylindrical specimens by adaptation of a twin-probe field gamma-ray gage into a laboratory device. The device can achieve an accuracy of of ±0.01 g/cm3 at the 95% confidence for a useful range of …

    nus Repository record for LABORATORY EVALUATION OF COMPACTED DENSITIES OF BITUMINOUS MIXTURES (opens in a new tab) Download file for LABORATORY EVALUATION OF COMPACTED DENSITIES OF BITUMINOUS MIXTURES (opens in a new tab)

  10. Fatigue Enhancement of Undersized, Drilled Crack-Stop Holes

    … the tool being developed is a small-scale laboratory device; once the technique is proven, it will be scaled up for use on full-scale bridge members under laboratory conditions. Lastly, a tool using the same technology will be developed for field application. The research includes a set of …

    ku Repository record for Fatigue Enhancement of Undersized, Drilled Crack-Stop Holes (opens in a new tab)

  11. Multilayering of fine paper with 3-layer headbox and roll and blade gap former

    … It consisted of methodological development and laboratory scale studies, as well as layering studies on the pilot paper machine scale. The potential of layered structures in papermaking and the phenomena affecting layer mixing were also studied. Filler distributions were characterized by two …

    aalto Repository record for Multilayering of fine paper with 3-layer headbox and roll and blade gap former (opens in a new tab)

  12. Zesilovače zvukových signálů pracující ve třídě D a jejich optimalizace

    Práca sa zaoberá prehľadom typov zosilňovačov zvukového signálu, pričom jej hlavným cieľom popis triedy D. Okrem základného princípu funkcie sú v nej prehodnotené najdôležitejšie parametre tejto triedy, ako aj jej nedostatky a nevýhody. Následne je vytvorený návrh laboratórneho prípravku …

    brno-tech Repository record for Zesilovače zvukových signálů pracující ve třídě D a jejich optimalizace (opens in a new tab)

  13. Syntetické prvky a jejich aplikace pro laboratorní výuku

    Tato bakalářská práce se zabývá návrhem a konstrukcí laboratorního přípravku určeného pro výuku syntetických prvků a jejich aplikací. Cílem této práce je poskytnout studentům praktické zkušenosti a hlubší porozumění procesů spojených s využitím syntetických prvků, které mají významné aplikace v …

    brno-tech Repository record for Syntetické prvky a jejich aplikace pro laboratorní výuku (opens in a new tab)

  14. Quantification of quality of foamed Warm Mix Asphalt binders and mixtures

    … the performance of the pavements. A nozzle-based laboratory foamer was utilized in this study to determine the effect of water content and air pressure on the foam quality individually and in combination. Results revealed that the water content and air pressure have significant influence on ER, …

    msu Repository record for Quantification of quality of foamed Warm Mix Asphalt binders and mixtures (opens in a new tab)

  15. Návrh a realizace přídavného modulu laboratorního zařízení pro měření tření v mazaných kontaktech

    Bakalářská práce se zabývá návrhem a realizací laboratorního modulu pro měření součinitele tření, resp. třecích sil v elastohydrodynamicky mazaných kontaktech současně ve dvou osách. Motivace k realizaci tohoto modulu byla absence podobného zařízení. Rešeršní část práce je věnována tribologii, …

    brno-tech Repository record for Návrh a realizace přídavného modulu laboratorního zařízení pro měření tření v mazaných kontaktech (opens in a new tab)

  16. Mechanismus automatické výměny nosiče vzorků – Petriho misek

    Tato bakalářská práce se zabývá návrhem a konstrukcí mechanismu pro automatickou výměnu nosiče vzorků – Petriho misek, který je určen jako periferie k zařízení Visor Vidilab sloužícímu k optickému vyhodnocení citlivosti bakterií na antibiotika. Cílem bylo vytvořit kompaktní, spolehlivé a cenově …

    brno-tech Repository record for Mechanismus automatické výměny nosiče vzorků – Petriho misek (opens in a new tab)

  17. Έλεγχος της δυναμικής συμπεριφοράς μη-γραμμικών κυκλωμάτων με μικροϋπολογιστές και εκπαιδευτικές εφαρμογές του

    … the context of the thesis, original educational devices were proposed for the control of dynamic behavior and a new approach is proposed through the experimental study of the chaotic systems. The dissertation consists of ten chapters, nine of which belong to five sections and the tenth chapter …

    greece Repository record for Έλεγχος της δυναμικής συμπεριφοράς μη-γραμμικών κυκλωμάτων με μικροϋπολογιστές και εκπαιδευτικές εφαρμογές του (opens in a new tab)

  18. Měření pasivních kmitočtových výhybek pro reproduktorové soustavy

    Obsahem práce je přiblížit problematiku měření charakteristik pasivních kmitočtových výhybek. Práce popisuje jednotlivé typy měřených charakteristik a jejich možnost měření. Následně řeší návrh modulů pro měření charakteristik pasivních výhybek a to bočník, nominální zátěž a koncový zesilovač. Tyto …

    brno-tech Repository record for Měření pasivních kmitočtových výhybek pro reproduktorové soustavy (opens in a new tab)

  19. Měření průtoku plynů

    Tato diplomová práce popisuje návrh a realizaci nových laboratorních přípravků, které mají studentům v rámci laboratorních cvičení přiblížit metody měření průtoku vzduchu. Vytvořené přípravky a laboratorní úlohy umožní studentům získat praktickou zkušenost s několika principy měření, se kterými se …

    brno-tech Repository record for Měření průtoku plynů (opens in a new tab)

  20. Modulární aktivní kmitočtové výhybky - laboratorní přípravek

    Obsahem práce je přiblížení problematiky návrhu aktivních kmitočtových výhybek a jejich realizace. Práce rozebírá jednotlivé typy obvodů používaných v aktivních kmitočtových výhybkách, zejména pak obvody použité pro zhotovení laboratorního přípravku. Následně řeší návrh desek plošných spojů (DPS) …

    brno-tech Repository record for Modulární aktivní kmitočtové výhybky - laboratorní přípravek (opens in a new tab)

Page 1 of 2