Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 182 for “"Laminated materials"”.

  1. A framework for damage modeling in multi-constituent laminated materials

    … heterogeneity across the spacial domain, between materials, and over time. Composite material containing directionally oriented material have become a necessity in the world of structural, mechanical, aerospace, and material engineering design. To account for the thermomechanical curing processes …

    uiuc Repository record for A framework for damage modeling in multi-constituent laminated materials (opens in a new tab)

  2. High-current inductors for high-power automotive DC-DC converters

    … is focused on the investigation of magnetic materials for high-power dcdc converters in hybrid and fuel cell vehicles and the development of an optimized high-power inductor for a multi-phase converter. The thesis introduces the power system architectures for hybrid and fuel cell vehicles. …

    cork Repository record for High-current inductors for high-power automotive DC-DC converters (opens in a new tab)

  3. Analysis of 2x2 braided composites

    … better impact and fatigue resistance than laminated composites. Along with good properties, they have a reduced manufacturing cost because much of the fabrication can be automated. In order to exploit these benefits, thorough understanding of the effect of various factors on their material …

    tamu Repository record for Analysis of 2x2 braided composites (opens in a new tab)

  4. Notched behaviour of stitched and unstitched RFI CFRP laminates

    … for poor out-of-plane mechanical properties in laminated materials and also as a new method of joining laminated aerospace structures. The effect of Kevlar® stitching on the fracture response of RFI laminates was successfully evaluated using an overheight compact tension (OCT) specimen. It had …

    ubc Repository record for Notched behaviour of stitched and unstitched RFI CFRP laminates (opens in a new tab) Download PDF for Notched behaviour of stitched and unstitched RFI CFRP laminates (opens in a new tab)

  5. The effect of thickness on the fracture behavior of graphite/bismaleimede laminates with central circular holes

    The influence of thickness and hole radius on the fracture strengths of Narmco V 5245C-G40-600 graphite/bismaleimide laminates was studied. Tests were run on 8 ply, 40 ply, and 80 ply quasi-isotropic laminates of stacking sequence [0/ ± 45/90]. Both unnotched and notched laminates were tested. …

    vt Repository record for The effect of thickness on the fracture behavior of graphite/bismaleimede laminates with central circular holes (opens in a new tab)

  6. Reduction of void content in laminated composites by mechanical vibrations

    … to mechanical properties of composite materials. Theory predicts and experiments show that mechanical properties deteriorate in the presence of voids, hence void management is critical to high quality composite parts. Eliminating common defects such as voids, bubbles, and poor adhesion …

    anu Repository record for Reduction of void content in laminated composites by mechanical vibrations (opens in a new tab)

  7. Response and failure analysis of a graphite-epoxy laminate containing terminating internal plies

    A change in laminate thickness due to terminating internal plies acts as a stress riser for both intralamina and interlaminar stresses. This laminate configuration is referred to as a ply drop. The linear elastic, three-dimensional stress distributions in the vicinity of a ply drop are determined …

    vt Repository record for Response and failure analysis of a graphite-epoxy laminate containing terminating internal plies (opens in a new tab)

  8. Technique for the Determination of Migratable Primary Aromatic Amines Applied to Multi-Laminate Pouches Utilizing Polyurethane Adhesives

    … adhesive applications in food contact materials (FCM’s) and food contact articles (FCAs). EU standards state that a maximum migration level of the total sum of PAAs may be no more than 10 ng g-1 of food. Testing for migration and quantification of PAAs has not been standardized, but …

    clemson Repository record for Technique for the Determination of Migratable Primary Aromatic Amines Applied to Multi-Laminate Pouches Utilizing Polyurethane Adhesives (opens in a new tab)

  9. Compression failure of angle-ply laminates

    The present work deals with modes and mechanisms of failure in compression of angleply laminates. Experimental results were obtained from 42 angle-ply IM7/8551-7a specimens with a lay-up of [ (±9) / (=F9)] 6s where 9, the off-axis angle, ranged from 0° to 90°. The results showed four failure modes, …

    vt Repository record for Compression failure of angle-ply laminates (opens in a new tab)

  10. Nonlinear temperature dependent failure analysis of finite width composite laminates

    A quasi-three dimensional, nonlinear elastic finite element stress analysis of finite width composite laminates including curing stresses is presented. Cross-ply, angle-ply, and some quasi-isotropic graphite/epoxy, laminates are studied. Curing stresses are calculated using temperature dependent …

    vt Repository record for Nonlinear temperature dependent failure analysis of finite width composite laminates (opens in a new tab)

  11. Edge caps for reinforcing composite laminates

    A method for reinforcing the free edges of a symmetric 11-ply graphite-epoxy laminate by adding a one-layer Kevlar-epoxy edge cap is studied. Generalized plane strain finite element analysis is used to predict that interlaminar stresses are reduced when an edge cap is added to the laminate. …

    vt Repository record for Edge caps for reinforcing composite laminates (opens in a new tab)

  12. Fatigue response of notched graphite--epoxy laminates

    Changes in the stiffness and strength of notched quasi-isotropic graphite-epoxy laminates were recorded and related to the fatigue damage. Two different laminates [0,90,+45,-45]s (type A) and [ +45, 90, -45, 0] s (type B) were considered and the effects of stacking sequence were compared. …

    vt Repository record for Fatigue response of notched graphite--epoxy laminates (opens in a new tab)

  13. Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates

    The effect of cooling rate and stacking sequence on fatigue behavior was analyzed for notched quasi-isotropic APC-2 laminates. The fatigue behavior of fast (475° F/min) and slow (1° F/min) cooled specimens of the following two layups was studied: Layup A of (-45/0/45/90), and Layup B of …

    vt Repository record for Effect of cooling rate and stacking sequence on the fatigue behavior of notched quasi-isotropic APC-2 laminates (opens in a new tab)

  14. Investigation of constraint effects on flaw growth in composite laminates

    … of constraint on the response of composite materials can be classified in two categories: (a) in-plane effects and (b) through-the-thickness effects. In-plane constraint is the principal contributor to notched strength and changes in notched strength under quasi-static loading. …

    vt Repository record for Investigation of constraint effects on flaw growth in composite laminates (opens in a new tab)

  15. Computation of interlaminar stresses from finite element solutions to plate theories

    Interlaminar stresses are estimated from plate theories by equilibrium. The elasticity equations of equilibrium are integrated with respect to the thickness coordinate z using the linear distribution in z of the in-plane stresses. This procedure, for example, requires fourth order derivatives of …

    vt Repository record for Computation of interlaminar stresses from finite element solutions to plate theories (opens in a new tab)

  16. Transverse microcracking in Celion 6000 graphite/PMR-15 polyimide composite

    … analysis with stress and temperature-dependent materials. The TVM density as a function of tensile load was predicted using the multiple cracking theory proposed by Garrett, Parvizi and Bailey. Reasonably good correlation between theory and experiment was obtained for both the load at initial …

    vt Repository record for Transverse microcracking in Celion 6000 graphite/PMR-15 polyimide composite (opens in a new tab)

  17. Nonlinear finite element analysis of a laminated composite plate with nonuniform transient thermal loading

    … are being replaced by lighter but equally strong laminated composite plates in order to improve efficiency and increase performance of aerospace vehicles. But because of the complex construction of laminated plates they are very difficult to analyze. Conventional thin plate theories prove to be …

    vt Repository record for Nonlinear finite element analysis of a laminated composite plate with nonuniform transient thermal loading (opens in a new tab)

  18. An incremental total Lagrangian formulation for general anisotropic shell-type structures

    Based on the principle of virtual displacements, the incremental equations of motion of a continuous medium are formulated by using the total Lagrangian description. After linearization of the incremental equations of motion, the displacement finite element model is obtained, which is solved …

    vt Repository record for An incremental total Lagrangian formulation for general anisotropic shell-type structures (opens in a new tab)

  19. Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates

    The characteristics of thermally-induced transverse cracks in T300/5208 graphite-epoxy cross-ply and quasi-isotropic laminates were investigated both experimentally and analytically. The formation of transverse cracks and the subsequent crack spacing present during cooldown to -250°F (116K) and …

    vt Repository record for Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates (opens in a new tab)

Page 1 of 10