Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Laminated materials Testing"”.

  1. Fatigue response of notched graphite--epoxy laminates

    … stacking sequence were compared. Nondestructive testing techniques such as X-radiography, moire technique, acoustic emission, deply technique, and stiffness change were performed to observe damage development. Static properties and damage initiation were related to an approximate stress analysis. …

    vt Repository record for Fatigue response of notched graphite--epoxy laminates (opens in a new tab)

  2. Investigation of constraint effects on flaw growth in composite laminates

    … Throughout the study, various nondestructive testing methods were employed to evaluate the material response and to determine the damage and damage growth in the specimens. These techniques include replication, ultrasonic c-scan, ultrasonic attenuation, acoustic emission, x-radiography, …

    vt Repository record for Investigation of constraint effects on flaw growth in composite laminates (opens in a new tab)

  3. Transverse microcracking in Celion 6000 graphite/PMR-15 polyimide composite

    … analysis with stress and temperature-dependent materials. The TVM density as a function of tensile load was predicted using the multiple cracking theory proposed by Garrett, Parvizi and Bailey. Reasonably good correlation between theory and experiment was obtained for both the load at initial …

    vt Repository record for Transverse microcracking in Celion 6000 graphite/PMR-15 polyimide composite (opens in a new tab)

  4. Buckling response of symmetrically laminated composite plates having a trapezoidal planform area

    … work is the buckling response of symmetrically laminated composite plates having a planform area in the shape of an isosceles trapezoid. The loading is assumed to be inplane and applied perpendicular to the parallel ends of the plate. The tapered edges of the plate are assumed to have simply …

    vt Repository record for Buckling response of symmetrically laminated composite plates having a trapezoidal planform area (opens in a new tab)

  5. Nondestructive inspection of load induced damage in fiber reinforced polyphenylene sulfide

    … were twofold: i) to determine nondestructive testing techniques were most responsive to developing damage and ii) to identify the damage modes using the nondestructive testing methods. The mechanical testing program involved the study of three types of specimens: straight sided tensile coupon, …

    vt Repository record for Nondestructive inspection of load induced damage in fiber reinforced polyphenylene sulfide (opens in a new tab)

  6. Linear analysis of laminated composite plates using a higher-order shear deformation theory

    … shear deformation theory is used to analyze laminated anisotropic composite plates for deflections, stresses, natural frequencies, and buckling loads. The theory accounts for parabolic distribution of the transverse shear stresses, satisfies the stress-free boundary conditions on the top and …

    vt Repository record for Linear analysis of laminated composite plates using a higher-order shear deformation theory (opens in a new tab)

  7. The effect of thickness on the fracture behavior of graphite/bismaleimede laminates with central circular holes

    The influence of thickness and hole radius on the fracture strengths of Narmco V 5245C-G40-600 graphite/bismaleimide laminates was studied. Tests were run on 8 ply, 40 ply, and 80 ply quasi-isotropic laminates of stacking sequence [0/ ± 45/90]. Both unnotched and notched laminates were tested. …

    vt Repository record for The effect of thickness on the fracture behavior of graphite/bismaleimede laminates with central circular holes (opens in a new tab)

  8. Stiffness reduction resulting from transverse cracking in fiber- reinforced composite laminates

    Several damage modes, including fiber breakage, delamination, and transverse cracking, have been observed to contribute to the mechanical degradation of fiber-reinforced composite laminates. In this investigation, the effect of transverse cracking on laminate stiffness was studied. Four. …

    vt Repository record for Stiffness reduction resulting from transverse cracking in fiber- reinforced composite laminates (opens in a new tab)

  9. Effect of processing induced defects on the failure characteristics of graphite epoxy angles

    The objective of this study was to investigate the bending strength and failure characteristics of AS4/3501-6 and AS4/1806 graphite/epoxy angles sections as a function of processing induced defects and porosity. The angle sections were removed from 30-inch long angles fabricated at Lockheed Georgia …

    vt Repository record for Effect of processing induced defects on the failure characteristics of graphite epoxy angles (opens in a new tab)

  10. Compressive failure of notched angle-ply composite laminates: three-dimensional finite element analysis and experiment

    Five angle-ply laminates ([0₄₈], [(±10)₁₂]<sub>s</sub>, [(±20)₁₂]<sub>s</sub>, [(±30)₁₂]<sub>s</sub>, and [(±45)₁₂]<sub>s</sub> with central circular holes were tested under uniaxial compressive loading. The results from these tests show that the [(±45)₁₂]<sub>s</sub> laminate exhibited plastic …

    vt Repository record for Compressive failure of notched angle-ply composite laminates: three-dimensional finite element analysis and experiment (opens in a new tab)

  11. Interlaminar stress analysis of dropped-ply laminated plates and shells by a mixed method

    … the linear analysis of interlaminar stresses in laminated composites, with special interest in laminates that contain terminated internal plies (dropped-ply laminates). Two models are derived, one for problems of generalized plane deformation and the other for the axisymmetric response of shells …

    vt Repository record for Interlaminar stress analysis of dropped-ply laminated plates and shells by a mixed method (opens in a new tab)

  12. Edge caps for reinforcing composite laminates

    A method for reinforcing the free edges of a symmetric 11-ply graphite-epoxy laminate by adding a one-layer Kevlar-epoxy edge cap is studied. Generalized plane strain finite element analysis is used to predict that interlaminar stresses are reduced when an edge cap is added to the laminate. …

    vt Repository record for Edge caps for reinforcing composite laminates (opens in a new tab)

  13. Notched strength analysis of tensile specimens taken from a thick, filament-wound graphite/epoxy pressure vessel

    … pressure vessel (cylinder) was performed by testing tensile coupons with various semi-elliptical surface notches. The strength of specimens with small notches was found to be notch insensitive. The strength of specimens with larger notches depended on the size of the notch. The fracture …

    vt Repository record for Notched strength analysis of tensile specimens taken from a thick, filament-wound graphite/epoxy pressure vessel (opens in a new tab)

  14. Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates

    The characteristics of thermally-induced transverse cracks in T300/5208 graphite-epoxy cross-ply and quasi-isotropic laminates were investigated both experimentally and analytically. The formation of transverse cracks and the subsequent crack spacing present during cooldown to -250°F (116K) and …

    vt Repository record for Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates (opens in a new tab)

  15. Comparison of theory and experiment for flexural-torsional buckling of laminated composite columns

    … elements. The theory was recently extended to laminated bars fabricated from advanced composite materials. The purpose of this research is to provide a study and assessment of the extended theory. The focus is on flexural and torsional-flexural buckling of thin-walled, open section, laminated …

    vt Repository record for Comparison of theory and experiment for flexural-torsional buckling of laminated composite columns (opens in a new tab)

Page 1 of 2