Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 98 for “"Lap-joint"”.
-
Acoustic-Emission Monitoring of Lap Joint Fatigue Cracks
… and understanding the behavior of materials and joints under various loading conditions is critical. This thesis presents a novel approach to detect and analyze fatigue induced cracks in various test specimens using Piezoelectric Wafer Active Sensors. This approach is widely used in Structural …
-
Impact Mechanics Of A Lap Joint: A Theoretical-Based Parametric Study
… fail. Thus, the behavior of damaged or worn joints is of particular concern. In order to represent a loose lap joint, a beam impacting four springs with gaps is modeled. A basis analysis reveals impulse frequency responses with unique dynamic phenomena. Using steady state response, six …
-
Double-Sided Arc Welding of AA5182 Sheet in the Lap-Joint Configuration
… to be capable of producing high quality butt-joint configuration welds in thin aluminum sheet and thick steel plate. In DSAW, an arc is initiated across two torches that are mounted on either side of the workpiece, allowing it to be welded from both sides. The objective of this research was to …
-
A novel finite element for modeling a fastener in a lap joint assembly
… specific application of mechanically fastened lap joints. The research here bridges the gap between two traditional methods commonly used in industry today. The novel element is more accurate than the first traditional method, by using a single-beam element to join plate elements with a linear …
-
Elastic Stress Analysis of an Adhesive Lap-Joint Subjected to Tension, Shear Force and Bending Moments
Made available in DSpace on 2014-12-12T00:25:53Z (GMT). No. of bitstreams: 1 7317349.pdf: 3940724 bytes, checksum: 4027fc0f518af228ff52b77e363b08d6 (MD5) Previous issue date: 1972
-
Guided Wave Inspection Of Cracks In The Rivet Hole Of An Aerospace Lap Joint Using Analytical-Fem Approach
… cracks in the rivet hole of the aerospace lap joint. Finite element analyses have been performed on the local damage area in spite of the whole large structure. Fundamental Lamb wave modes (S0 and A0) have been strike on the local damage from multiple directions to analyze the cracks of …
-
Investigation of the Effects of Geometry on the Efficiency of the Double Lap Joint of Unidirectional Fiberglass Composites
… shear mode (Mode II) has been studied for double lap adhesive joints where geometry of the joint is the major parameter. A unidirectional fiberglass - epoxy system was selected for experimental tests and theoretical analysis. Both rectangular and elliptical planform geometries were investigated. …
-
Fatigue properties of dissimilar metal laser welded lap joints.
… steel. The work investigates both tensile and lap shear properties of similar and dissimilar metal laser welded butt and lap joints, with the majority of the investigation concentrating on the fatigue properties of dissimilar metal laser welded lap joints. The problems encountered when laser …
-
The selection of adhesives and composite matrix resins for aircraft repairs
… an IBM PC and this allowed water uptake within a lap joint to be related to time, diffusion coefficient and solubility coefficient. Later in the project attempts were made to relate the tensile properties to lap joint strength. They were partially successful and led to a number of wedge tests to …
-
Effect of Bolted Joint Preload on Structural Damping
Bolted joints are integral parts of mechanical systems, and bolt preload loss is one of the major failure modes for bolted joint structures. Understanding the damping and frequency response to a varying preload in a single-bolted lap-joint structure can be very helpful in predicting and analyzing …
-
Development of LTTW consumables for the enhancement of mechanical properties and residual stress management in thin steel welded joints
… of auto-body. In addition, fatigue life of the lap-joint panels using advanced high strength steels (AHSS) is typically limited by the weldments. Low transformation temperature welding (LTTW) consumables are characterized by low martensite start temperature and large fraction of martensite …
-
Viscoelastic stress analysis of adhesively bonded joints
… solutions for the stress analysis of the single lap joint were studied intensively, and methods of analysis and assumptions between the analyses of Goland and Reissner, Hart-Smith and Delale and Erdogan were compared. The existing SAAS3V finite element program was modified to accommodate …
-
Small fatigue crack detection using phased array technology
… cracks under fastener heads in a two layered lap joint configuration. Mock aircraft fuselage panels were created by overlapping two 0.063 inch thick 2024-T3 aluminum plates with three rows of fasteners. These test specimens were then subjected to a cyclic tension-tension loading between 3,276 …
-
A study of single-lap joints
Single-lap joints are a widely-used and relatively strong and simple way joining two materials via an overlapping bond. With the growing use of composite materials in modern design practices, the need to join increasingly dissimilar materials has arisen. As such, knowledge concerning the behavior …
-
Life prediction of spot-welds: a fatigue crack growth approach
… to the problem. The predictions fit data for lap joint configurations well, but not so for peel joint geometries.
-
A Finite Element and Experimental Investigation on the Fatigue of Riveted Lap Joints in Aircraft Applications
… force on fatigue crack initiation in the riveted lap joint. In this work, a 3D finite element model of the riveting process that incorporates plasticity and contact between the various surfaces is simulated using ABAQUS finite element code to capture the residual stress state at the rivet/skin …
-
Damage and Failure Analysis of Co-Cured Fiber-Reinforced Composite Joints
Joints represent a design challenge, especially for composite structures. Among the available joining methods, co-curing is an efficient way to integrate parts for some applications. Coates and Armanios have proposed a Single Nested Overlap (SNO) co-cured joint configuration, obtained from a single …
-
Co-cured composite joint strength investigation based on behavior characterization of [0/±θ/90]s family
Joints provide a path for transfer of load and are important components in an assembly of structures, particularly in translating joint strength improvements directly to significant cost savings. This cost savings is more evident in composite joints since manufacturing of more complex single piece …
Page 1 of 5