Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 44 for “"Large residual"”.

  1. Uncalibrated robotic visual servo tracking for large residual problems

    In visually guided control of a robot, a large residual problem occurs when the robot configuration is not in the neighborhood of the target acquisition configuration. Most existing uncalibrated visual servoing algorithms use quasi-Gauss-Newton methods which are effective for small residual …

    gatech Repository record for Uncalibrated robotic visual servo tracking for large residual problems (opens in a new tab)

  2. Experimental Testing and Reliability Analysis of Repaired SMA and Steel Reinforced Shear Walls

    … advantage is the ability of the SMA to recover large nonlinear strains, which promotes the self-centering phenomenon. The primary objective of this research is to present the performance, before and after repair, of slender reinforced concrete shear walls, one reinforced internally with SMAs in …

    ottawa-retro Repository record for Experimental Testing and Reliability Analysis of Repaired SMA and Steel Reinforced Shear Walls (opens in a new tab)

  3. Η επίδραση της εγκυμοσύνης στην ανάπτυξη λιθίασης των χοληφόρων: Προοπτική μελέτη

    … well as an incomplete emptying of it leaving a large residual volume, were found after the second trimester of the pregnancy. From the biochemical assays progressively increased levels of cholesterol, triglyceridia and alkaline phosphatase, were found in all pregnant women. In the six cases who …

    greece Repository record for Η επίδραση της εγκυμοσύνης στην ανάπτυξη λιθίασης των χοληφόρων: Προοπτική μελέτη (opens in a new tab)

  4. A global optimization technique for zero-residual nonlinear least-squares problems

    … strategy for approximating global minima of zero-residual least-squares problems. This class of nonlinear programming problems arises often in data-fitting applications in the fields of engineering and applied science. Such minimization problems are formulated as a sum of squares of the errors …

    rice Repository record for A global optimization technique for zero-residual nonlinear least-squares problems (opens in a new tab)

  5. Kinematics and Preliminary FEMA P-695 Evaluation of the NewZ-BREAKSS Steel Boundary Frame with Buckling Restrained Brace Structural Fuses

    … However, BRBFs are also susceptible to large residual drifts, which can make repair difficult. Efforts to reduce the residual drift of BRBFs typically involve special self-centering braces, or by using a dual system in tandem with the BRBF. This study proposes an alternative approach, in …

    mtu Repository record for Kinematics and Preliminary FEMA P-695 Evaluation of the NewZ-BREAKSS Steel Boundary Frame with Buckling Restrained Brace Structural Fuses (opens in a new tab)

  6. Performance-based assessments of buckling-restrained braced steel frames retrofitted by self-centering shape memory alloy braces

    … buckling restrained braced frames (BRBFs) have a large residual deformation after a median or high seismic event due to steel’s residual strain. In order to address this issue, innovative self-centering SMA braces are proposed and installed in the originally unbraced bays in existing BRBFs to …

    gatech Repository record for Performance-based assessments of buckling-restrained braced steel frames retrofitted by self-centering shape memory alloy braces (opens in a new tab)

  7. Statistical Physics of Soft Random Solids: Vulcanization, Heterogeneity, and Elasticity

    … elasticity of soft random solids, in terms of residual stress and Lam'e-coefficient fields. In particular, there are large residual stresses in the equilibrium reference state, and the disorder correlation functions involving the residual stress are found to be long-ranged and governed by a …

    uiuc Repository record for Statistical Physics of Soft Random Solids: Vulcanization, Heterogeneity, and Elasticity (opens in a new tab)

  8. AlGaN/GaN HFET with composite 'slow/fast' gate

    … channel-gate coupling and hence relatively large residual capacitance. To realize the best switch performance at microwave frequencies COFF minimization is critically important. In this dissertation, a novel device design defined as composite "slow/fast" gate is put forward. The "slow gate" …

    south-carolina Repository record for AlGaN/GaN HFET with composite 'slow/fast' gate (opens in a new tab)

  9. Investigation of Finite Element Analysis Techniques for Direct Energy Deposition Additive Manufacturing

    … faced by additive manufacturing (AM) are high residual stresses and part distortion. Due to the high temperature gradients generated during the process, large residual stresses are generated. These stresses can cause a part to distort out of spec or worsen fatigue properties, creating points of …

    ut-knoxville Repository record for Investigation of Finite Element Analysis Techniques for Direct Energy Deposition Additive Manufacturing (opens in a new tab)

  10. Scaling rank-one updating formula and its application in unconstrained optimization

    … that it is a very promising method for solving large scale optimization problems. In addition, some popular technologies in unconstrained optimization are also discussed, for example, the trust region step, the descent direction with supermemory and. the detection of large residual in nonlinear …

    anu Repository record for Scaling rank-one updating formula and its application in unconstrained optimization (opens in a new tab)

  11. Automatic Block-Matching Registration to Improve Lung Tumor Localization During Image-Guided Radiotherapy

    … population. However, despite these improvements, large residual target localization errors were noted, indicating that purely rigid couch shifts cannot correct for all sources of inter-fractional variability. Further reductions in treatment uncertainties may require the combination of high-quality …

    vcu Repository record for Automatic Block-Matching Registration to Improve Lung Tumor Localization During Image-Guided Radiotherapy (opens in a new tab)

  12. MULTIFUNCTIONAL BEHAVIORS OF TWO-DIMENSIONAL MATERIALS AND THEIR COMPOSITES

    … atom bridging. Highly nonlinear responses and large residual deformations were observed under cyclic compression of MXene microparticles. At last, a wireless, flexible on-mask immunosensing-based COVID-19 breath sensor was developed to detect air-borne viruses"--Abstract, p. iii</p>

    must-thes Repository record for MULTIFUNCTIONAL BEHAVIORS OF TWO-DIMENSIONAL MATERIALS AND THEIR COMPOSITES (opens in a new tab)

  13. Performance of Superelastic Shape Memory Alloy Reinforced Concrete Elements Subjected to Monotonic and Cyclic Loading

    … the steel strain is permanent, thus leading to large residual deformations that can render the structure unserviceable after the earthquake. Alternative reinforcing materials such as superelastic SMAs offer strain recovery upon unloading, which may result in improved post-earthquake recovery. …

    ottawa-retro Repository record for Performance of Superelastic Shape Memory Alloy Reinforced Concrete Elements Subjected to Monotonic and Cyclic Loading (opens in a new tab)

  14. Numerical simulation of a load-based microindentation technique for nde on thermal barrier coating systems

    … coefficient mismatch are the major causes of large residual stress and will cause interfacial rumpling instability leading to large scale spallation failure. Through finite element simulations, it is shown that the residual stresses generated within the thermally grown oxide (TGO), bond coat …

    wvu Repository record for Numerical simulation of a load-based microindentation technique for nde on thermal barrier coating systems (opens in a new tab)

  15. Stress and microstructural evolution during shape-preserving silica magnesiothermic reduction

    … silicate is consumed by reaction. In addition, a large residual stress (> 5 GPa) was measured in the MgO/Si product layer formed during reaction of planar quartz. Despite the presence of such a large stress, no distortion or cracking of reacted structures was found to occur after reaction in the …

    gatech Repository record for Stress and microstructural evolution during shape-preserving silica magnesiothermic reduction (opens in a new tab)

  16. Produção de surfactina por Bacillus subtilis UFPEDA 438 utilizando melaço de cana como substrato

    … experiments ranging from 6.2 to 6.7 also a large residual content of substrate was observed. The Critical Micellar Concentration (CMC) of the produced biosurfactant at the best cultivation condition was 20.73 mg/L, thus showing good efficiency as surface agent. Also, it showed an …

    brazil-ufrn Repository record for Produção de surfactina por Bacillus subtilis UFPEDA 438 utilizando melaço de cana como substrato (opens in a new tab)

  17. The contribution of retell to the identification of struggling adolescent readers

    … .167, p < .001). Retell did, however, have a large residual variance (.938), suggesting it did not function well as a measure of comprehension in its current state with low inter-rater reliability (K = .37). Narrative retell scores (.352, p< .001) were better predictors of comprehension than …

    texas Repository record for The contribution of retell to the identification of struggling adolescent readers (opens in a new tab)

  18. STRESS ANALYSIS OF BALLISED HOLES

    … a hole can be improved. In addition, compressive residual stresses are introduced onto the hole surface as a results of the interference between the hole and the ball. These factors give rise to significant enhancement in the fatigue performance of the ballised hole in comparison to that of …

    nus Repository record for STRESS ANALYSIS OF BALLISED HOLES (opens in a new tab) Download file for STRESS ANALYSIS OF BALLISED HOLES (opens in a new tab)

  19. In-situ synchrotron studies of turbine blade thermal barrier coatings under extreme environments

    … layer develops at the bond coat-YSZ interface. Large residual stresses develop in these layers due to thermal expansion mismatch that occurs during cool down from high temperature spraying and cyclic operating conditions. Despite their standard use, much is to be determined as to how these …

    ucf Repository record for In-situ synchrotron studies of turbine blade thermal barrier coatings under extreme environments (opens in a new tab)

  20. Residual Stress Constrained Topology and Build Orientation Optimization of Parts Fabricated by Metal Additive Manufacturing

    … of metal additive manufacturing is the large residual stresses that are formed throughout the fabrication process, which may lead to failure of printed parts by warping, cracking, or delamination. Therefore, there is significant interest in the development of numerical tools and methods …

    queens Repository record for Residual Stress Constrained Topology and Build Orientation Optimization of Parts Fabricated by Metal Additive Manufacturing (opens in a new tab)

Page 1 of 3