Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Large rotations"”.

  1. Dynamic analysis of highly deformable bodies undergoing large rotations

    … is introduced with the purpose of computing large deformations in the dynamic analysis of highly deformable bodies. Since the deformation rate of a deformable body is generally not zero, the time derivatives of the motions of these element frames do not vanish. This …

    arizona-thes Repository record for Dynamic analysis of highly deformable bodies undergoing large rotations (opens in a new tab)

  2. Modeling of frame structures undergoing large deformations and large rotations

    Numerical simulation of large-scale problems in structural dynamics, such as structures subject to extreme loads, can provide useful insights into structural behavior while minimizing the need for expensive experimental testing for the same. These types of problems are highly non-linear and usually …

    purdue-thes Repository record for Modeling of frame structures undergoing large deformations and large rotations (opens in a new tab)

  3. GEOMETRICALLY NONLINEAR ANALYSIS OF THIN ARBITRARY SHELLS USING DISCRETE-KIRCHHOFF CURVED TRIANGULAR ELEMENTS (FINITE).

    … for the GNL analysis in the region of large displacements and small rotations. It is concluded that this simple and economical element will be an ideal choice for the expensive nonlinear analysis of shells. However, it is suggested that the element formulation should include large …

    arizona-thes Repository record for GEOMETRICALLY NONLINEAR ANALYSIS OF THIN ARBITRARY SHELLS USING DISCRETE-KIRCHHOFF CURVED TRIANGULAR ELEMENTS (FINITE). (opens in a new tab)

  4. Computational Modeling of Finite Deformation Fracture

    … frame of reference such that the mechanics of large strain and large rotations can be modeled correctly. The local coordinate system necessary for defining an imbedded cohesive zone is constructed with respect to the current configuration of the system and is updated within the nonlinear …

    tamu Repository record for Computational Modeling of Finite Deformation Fracture (opens in a new tab) Embargoed until 2027-05-01

  5. Correntropy: Answer to non-Gaussian noise in modern SLAM applications?

    … to registration are very inefficient with large rotations and translation. In addition, when the 3D datasets used for alignment are corrupted with non-Gaussian noise (shot/impulse noise), prior state-of-the-art approaches fail. Our work has given birth to another variant of ICP, which we …

    unr Repository record for Correntropy: Answer to non-Gaussian noise in modern SLAM applications? (opens in a new tab)

  6. POST-BUCKLING BEHAVIOR OF ELASTIC FRAME STRUCTURES.

    … elastic frame structures undergoing large deformations and large rotations, using a mini-computer with an attached array processor. An updated Lagrangian finite element formulation is established by employing conventional two node-twelve degree of freedom beam elements. In order to …

    arizona-thes Repository record for POST-BUCKLING BEHAVIOR OF ELASTIC FRAME STRUCTURES. (opens in a new tab)

  7. SUBHARMONIC BEHAVIOUR OF COMPLIANT OFFSHORE STRUCTURES

    … of rigid bodies. The first part of this work is largely involved with the derivation of the equations of motion of a general rigid body undergoing large displacements and subjected to wave induced forces. The approach adopted involves the application of Euler parameters which are used to define …

    nus Repository record for SUBHARMONIC BEHAVIOUR OF COMPLIANT OFFSHORE STRUCTURES (opens in a new tab) Download file for SUBHARMONIC BEHAVIOUR OF COMPLIANT OFFSHORE STRUCTURES (opens in a new tab)

  8. Seismic response of existing buildings constructed using semi-rigid riveted connections.

    … moment rotation behavior, but must undergo large rotations in order to reach moderate moment capacity. This raises important concerns about the ability of buildings having such connections to withstand earthquakes while undergoing large drifts. An 18-story building located in Eastern Canada …

    ottawa-retro Repository record for Seismic response of existing buildings constructed using semi-rigid riveted connections. (opens in a new tab)

  9. Methods for increased computational efficiency of multibody simulations

    … and the problem of interpolation of finite rotations in geometrically exact structural elements is revisited. This results in the development of a new improved interpolation algorithm, which preserves the objectivity of the strain field and guarantees stable simulations in the presence of …

    gatech Repository record for Methods for increased computational efficiency of multibody simulations (opens in a new tab)

  10. Συμβολή στην μελέτη της ελαστικής ευστάθειας επιπέδων ορθογωνικών πλαισίων εκ ράβδων μεταβαλλομένης ακαμψίας

    … nonlinear stability theory is that of moderately large displacements, associated with nonlinear kinematic relationships, moderately large rotations, and small axial dimensionless strains. The basic assumption of this study is that the failure of the above frames will be due to elastic buckling. …

    greece Repository record for Συμβολή στην μελέτη της ελαστικής ευστάθειας επιπέδων ορθογωνικών πλαισίων εκ ράβδων μεταβαλλομένης ακαμψίας (opens in a new tab)

  11. A mixed computational algorithm based on the updated Lagrangian description for plane elastic contact problems

    … developed for an arbitrary plane body undergoing large deformations (i.e. large displacements, large rotations and small strains) under external loads using the updated Lagrangian formulation. The mixed finite element formulation allows the nodal displacements and stresses to be approximated …

    vt Repository record for A mixed computational algorithm based on the updated Lagrangian description for plane elastic contact problems (opens in a new tab)

  12. Multi-DOF precision positioning methodology using two-axis Hall-effect sensors

    … of less than 10 µm and capable of sensing large rotations. Controllers were designed to close the control loop for the three planar degrees of freedom motion using the GLSDC outputs at a sampling frequency of 800 Hz on a Pentek 4284 digital signal processor (DSP). Calibration was done by …

    tamu Repository record for Multi-DOF precision positioning methodology using two-axis Hall-effect sensors (opens in a new tab)

  13. Stress Analysis and Fatigue Life Prediction of Pseudoelastic NiTi Shape Memory Alloy Tapered Stress Joint via Finite Element Method

    … TSJ and allowing the TSJ to survive extremely large rotations due to storms, explosions, and collisions. To this end, the finite element analysis (FEA) of the pseudoelastic NiTi TSJ system is implemented using the Abaqus/Standard program and with a user subroutine (UMAT). The FEA assumes the …

    tamu Repository record for Stress Analysis and Fatigue Life Prediction of Pseudoelastic NiTi Shape Memory Alloy Tapered Stress Joint via Finite Element Method (opens in a new tab)

  14. Analysis of Elastic and Viscoelastic Smart Flexible and Foldable Systems

    … flexible and foldable structures are undergoing large rotations and relatively small strains that are triggered by electro-mechanical actuations. The electric actuation is done by stimulating the bonded patches with electric voltages, while the mechanical actuation is in the form of prescribed …

    tamu Repository record for Analysis of Elastic and Viscoelastic Smart Flexible and Foldable Systems (opens in a new tab)

  15. Snapping and Fluttering of Elastic Rods

    The exact solutions for planar rods undergoing large rotations and subject to kinematically controlled ends are presented in the first part of the thesis. In particular, the equilibrium equations for a rod subject to Dirichlet boundary conditions and to isoperimetric constraints are derived through …

    trento Repository record for Snapping and Fluttering of Elastic Rods (opens in a new tab)

  16. Determining Upper Extremity Posture Using a Simplified Marker Configuration for Biomechanical Risk Evaluation during Tool Use

    … their great freedom of motion, which allows for large rotations in multiple directions. The Euler and quaternion methods, which are two commonly used methods for describing joint angles and body segment postures and movement, have great limitations when dealing with upper extremities. The planar …

    uconn-diss Repository record for Determining Upper Extremity Posture Using a Simplified Marker Configuration for Biomechanical Risk Evaluation during Tool Use (opens in a new tab)

  17. Novel and Fast Peridynamic Models for Large Deformation and Ductile Failure

    … theory, are limited to small strains/small rotations, or suffer from numerical instabilities. The consistent and stable ones are computationally costly, making them unusable in simulating engineering 3D systems.In this dissertation, we first introduce a new elastoplastic 2D ordinary …

    nebraska Repository record for Novel and Fast Peridynamic Models for Large Deformation and Ductile Failure (opens in a new tab)

  18. Nonlinear finite element modeling of shells for multiscale analysis applications

    … extended to shell structures that may undergo large deformations and strains and the same hypotheses are exploited for the periodicity of their heterogeneities and their size scale. Appropriate use of an attached coordinate system for the transformation of the utilized strain measures enables …

    greece Repository record for Nonlinear finite element modeling of shells for multiscale analysis applications (opens in a new tab)

  19. On simple and accurate finite element models for nonlinear bending analysis of beams and plates

    … freedom that consist of three displacements, two rotations, and three moment resultants. The geometric nonlinearity, in the sense of the von Kµarman, is included in the plate theory. The mixed plate element developed herein is employed in the linear and nonlinear bending analysis of a variety …

    tamu Repository record for On simple and accurate finite element models for nonlinear bending analysis of beams and plates (opens in a new tab)

  20. Functional nonlinearities enable compliance-switching in elastogranular structures

    … geometric nonlinearities (e.g. buckling, large rotations) which can be leveraged to create a structure with unique attributes (e.g. negative Poisson’s ratio; chirality). The combination of elastic components (shells and rods) and granular components (spheres and rocks) allows for the …

    bu Repository record for Functional nonlinearities enable compliance-switching in elastogranular structures (opens in a new tab)

Page 1 of 2