Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 652 for “"Laser Power"”.
-
Analysis of laser power amplifiers.
The design of laser systems based on the HF chemical reaction presents special problems resulting from the shape of the active region. In this study, a Rigrod-type approach is used to analyze a master oscillator power amplifier. By suitably arranging two flat mirrors beside the active media, a …
-
External cavity laser power stabilizer
… to design a stabilizer which does not depend on laser source--with external cavity. In the first part of the thesis ( Chapter 2 and 3 ), we discuss the wave propagation in crystals and the modulation of optical radiation. From the main two types electro-optic modulations, Phase Modulation and …
-
Position based laser power (PBLP) control for selective laser sintering (SLS)
… implementing, and testing a Position Based Laser Power (PBLP) controller for a Selective Laser Sintering (SLS) machine. Current commercial laser scanning systems do not allow for variable laser power control along the length of a scan line. As found in previous work, varying the power across …
-
Investigation of Dielectric Optical Coatings for Intra-cavity Laser Power in a Ho:YAG Laser
… of light, and the response of these coatings to laser-induced heating. Spectrally complex coatings are required in end-pumped cavity configurations as they must simultaneously account for both pump and lasing wavelengths. Optical coating layers designed for 2-μm light are inherently thicker …
-
Predictive iterative learning control with data-driven model for near-optimal laser power in selective laser sintering
… parts is still a key challenge for Selective Laser Sintering machines today due to a lack of sufficient process control. In order to improve process control, a Predictive Iterative Learning Control (PILC) controller is introduced that minimizes the deviation of the post-sintering temperature …
-
Effects of Increasing Laser Power on Microstructure Formed During Selective Laser Melting of Co-29Cr-6Mo Alloy
… of 3D printed parts made using selective laser melting (SLM) Co-29Cr-6Mo alloy, how SLM parameters affect the quality and properties of parts need to be understood. In this PhD research, how laser power (P) affects the geometry of tracks was studied first. This track geometry relates well …
-
Evaluation of Laser Power, Heat Treatment, and Wall Configuration of SS316L and ER70S-6 Structures Fabricated by Wire Laser Metal Deposition
Wire-Laser Metal Deposition (W-LMD) is a transformative direct energy deposition additive manufacturing technology that utilizes a laser heat source to melt metallic wire feedstock for the high-efficiency fabrication of large-scale, near-net-shape components. The technology is distinguished by its …
-
Energy-efficient electrical and silicon-photonic networks in many core systems
… communication due to their lower data-dependent power and higher bandwidth density, but the high laser power can more than offset these advantages. Therefore, we propose a silicon-photonic multi-bus NoC architecture and a methodology that can reduce the laser power by 49% on average through …
-
Investigation of the Selective Laser Melting of WC-Reinforced SS 316L Composites
… the volume fraction of tungsten carbide (WC) and laser power on the processing, structure, properties, and mechanical performance of WC-reinforced SS 316L composite materials, additively manufactured via Selective Laser Melting (SLM) - the primary objectives are to improve its wear resistance and …
-
Tunable high order anti-Stokes radiation produced by stimulated Raman scattering
… studied experimentally. The light beams of two lasers of different frequencies a ruby laser and tunable dye laser --.are simultaneously focussed in liquid nitrogen and two distinct series of anti-Stokes lines are observed. The dye laser anti-Stokes lines can be changed in frequency by tuning the …
-
An investigation of the effect of contour process parameters on the surface roughness and dimensionality of overhanging features in 17-4 stainless steel.
… fabricated in 17-4 stainless steel via selective laser melting (SLM). Varying the contour settings of laser power (W), scan speed (mm/s), and beam offset (mm) for unsupported inclined bars. The utilization of a coordinate measuring machine (CMM) and surface profilometer quantified the dimensional …
-
A two-dimensional model of a laser supported hydrogen plasma
<p>A two-dimensional model was developed for a laser supported plasma in hydrogen, based on a model developed by Batteh for air plasmas. Batteh's radiation loss model was modified to include radiation loss from all portions of the plasma. The a priori use of the laser absorption "ignition …
-
Femtosecond Laser Inscribed Calibration Phantoms for Optical Coherence Tomography
The thesis describes work using a femtosecond laser to fabricate high precision microstructures as multipurpose 3D OCT calibration phantoms that can be used to quantitatively characterise and calibrate across different OCT systems. The research has been focused on three areas in developing the OCT …
-
Modelling of Laser Surface Glazing for Metallic Materials by Finite Element Method
Laser surface glazing (LSG) is widely used to improve surface hardness and wear resistance in casting tool, railroad, automotive and bioimplant industries. This PhD project focused on developing a simple and reliable model of LSG for metallic materials by FEM. Both 2D and 3D transient thermal model …
-
Direct laser fabrication of Ti-5553
… of the fabricated structures and concludes that laser power, Powder feed rate and scanning speed are the 3 major processing parameters that would influence the integrity and the quality of the deposition. The research then reviews the effect of each parameter in relationship to the other …
-
In-Situ Monitoring and Quality Assurance Algorithms for Laser Powder-Bed Fusion
… of defects in parts fabricated by a commercial laser powder bed fusion (LPBF) system. To detect pores initiated from the lack-of-fusion phenomenon, light intensity emitted from the melt pool is measured by in-situ photodiode-based monitoring systems and then analyzed by multiple analytical …
-
Laser Powder Bed Fusion of Shape Memory Alloy NiTi for Biomedical Applications
… aerospace, biomedical and robotics. Recently, laser power bed fusion (LPBF) additive manufacturing, which fabricates metallic components by selectively melting layers of material, offers great potential for the design and fabrication of NiTi samples with complex geometries. Firstly, the aim of …
-
Process Optimization of Additive Manufacturing of Tool Steels
… fields in manufacturing industry. Selective laser melting is one of the techniques based on powder bed fusion and used normally for metallic materials. H13 tool steel is categorized as difficult – to – build materials, because the alloy carbides contained due to high amount of carbon make it …
Page 1 of 33