Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"Laser Sensor"”.
-
In-plane Tire Deformation Measurement Using a Multi-Laser Sensor System
… improvements. The emergence of various tire sensors provides an opportunity to make accurate measurement of the physical quantities that are involved in tire-road interactions. This thesis aims to measure and analyze the in-plane deformation of rolling tires through its direct correlations …
-
Development and demonstration of a diode laser sensor for a scramjet combustor
… is to test the effectiveness of tunable diode laser absorption spectroscopy (TDLAS) as a scramjet diagnostic.¶ ...
-
Design, fabrication and analysis of a Terfenol-D based magnetostrictive external cavity diode laser sensor with an advanced signal processing capability
… and an ultra-short external cavity diode laser sensor. A thin slice of the magneto strictive material, biased by an open magnetic circuit, is configured as an external reflector modulating the effective modal reflectivity of the diode laser cavity in response to an ac magnetic field. The …
-
Label-Free Biosensor Based Upon Replica-Molded Vertically Emitting Distributed Feedback Laser
The DFB laser sensor represents a departure from conventional passive resonant sensors insofar as the device actively generates its own narrowband high-intensity output without stringent requirements on the coupling alignments resulting in a simple, robust illumination and detection configuration. …
-
Parameter variations in Hector SLAM
… can be used with mobile robots, which uses a laser-based sensor. This thesis presents a method of evaluating the impact of parameter variations on map degradation using SLAM. The mobile robot used in this work is connected to a laser sensor and the SLAM algorithm being used is Hector SLAM. …
-
3D laser methods for calibrating and localising robotic vehicles
… and automatic target-less calibration of a 3D laser sensor; this is then used to localise an autonomous vehicle without using other sensors.</p> <p>Two novel contributions to our knowledge of robotics are presented here. The first is an automatic calibration routine, which is capable of …
-
Robotic Surface Finishing of Curved Surfaces: Real-Time Identification of Surface Profile and Control
… is accomplished by employing a proximity laser sensor mounted on the robot end-effector. The proximity sensor measurements coupled with the robot kinematics is employed to derive the coordinates of the projection points. The entire set of projection points is combined to form a grid upon …
-
Development of a laser scanning system for the inspection of surface defects
… of this project is the development of a low cost laser scanning system for the detection of surface defects The inspection system is based on a laser sensor, power supply unit and an X-Y table All of these components are interfaced with a personal computer The system developed is capable of …
-
DESIGN, TESTING AND NEURAL NETWORK MODELING OF A LOW-FRICTION WAVE ENERGY CONVERTER TESTBED
… provides real-time PTO force information and a laser sensor is used for noncontact displacement measurement. The voice coil has a nonlinear relationship between force, current, and displacement and is modeled using a neural network. The results of a typical use case are provided illustrating its …
-
Real-time vertical track deflection measurement system
… system consists of a loaded hopper with a camera/laser sensor system to detect the vertical deflection of the rail relative to the wheel/rail contact point. Modeling and simulation of the system is also presented along with the mathematical models which can be used to estimate track modulus. The …
-
Active Sensing And Estimation For Nonlinear Systems With Applications To Car-Bicycle Collision Prevention
… dissertation develops a smart bicycle with novel sensors, active sensing control systems and nonlinear estimation algorithms for prevention of car-bicycle collisions. The smart bicycle tracks nearby cars, predicts their trajectories, and in the case of an anticipated collision with the bicycle …
-
Development of a Field Deployable Underwater Laser Scanning System
… about small features and defects. Underwater laser scanners have been investigated for underwater measurements and demonstrated to operate with success; however, the current deployment options of these systems are limited. Through this thesis, an easy to deploy underwater laser scanner was …
-
Design and Fabrication of a Magnetic Manipulator with Five Degrees of Freedom
… logic with 𝑘𝑝= 3.25 and 𝑘𝑖=0.01 using a laser sensor had been successfully investigated. It first predicts the magnetic field using ANN/SA at the agent's current position provided by the laser sensor; then, regulates the current flowing through each coil till the agent settles at the …
-
Modeling a contact patch using a multiple laser system
… For the past seven years, the standard single laser system has provided adequate repeatability on tight mix asphalt and lightly textured concrete, however, this research led to the development of a multi laser sensor system called the TriODS laser system. The TriODS is a multiple laser system …
-
Testing Cognitive Mapping Ideas on a Mobile Robot
… and tested on a mobile robot equipped with a laser sensor. Its performance has been analyzed in relation to the traditional SLAM approaches, and different experiments have been conducted which cover typical problems of robotic mapping. Additionally, a simple method has been shown which enables …
-
INFRARED OPTICAL SENSOR FOR COMBUSTION DIAGNOSTICS USING WAVELENGTH MODULATION SPECTROSCOPY
In this dissertation, an optical sensor for combustion diagnostics, based on near-infrared distributed feedback (DFB) tunable diode lasers, is developed. The sensor is implemented to perform simultaneous species and temperature measurements in a combustion system. The use of optical sensing allows …
-
Implementation of an Unmanned Aerial Vehicle for New Generation Peterbilt Trucks
… height control in an outdoor environment using a laser sensor and an android flight control application that includes take-off, landing, throttle control, and real-time video transmission. The height algorithm developed is the core of this thesis project. Phantom 2 Vision+ uses a pressure sensor …
-
Discovering Regularity in Point Clouds of Urban Scenes
… in 3D range scans acquired by a time-of-flight laser sensor. The applications of this regularity information are broad, and we present two original algorithms. The first exploits the efficiency of the Fourier transform for the real-time detection of periodicity in building facades. Periodic …
Page 1 of 3