Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Laser Spallation"”.
-
CELL AND BIOFILM ADHESION STRENGTH QUANTIFIED BY THE LASER SPALLATION TECHNIQUE YIELDS A NOVEL BIOCOMPATIBILITY METRIC, THE ADHESION INDEX
… onto orthopedic implant-simulant surfaces. The laser spallation technique, a non-contact and rapid onset thin film adhesion technique is employed to quantify adhesion strength. High-amplitude short-duration stress waves generated by laser pulse absorption are used to spall bacteria and cells …
-
High Strain-Rate Material Behavior by Short Pulse Laser-Generated Stress Waves
… Stress waves generated from tabletop short pulse lasers allows the study of material behavior in the pressure range of 10's GPa and strain-rates up to 10<super>8</super> s<super>-1</super>. In this dissertation, a parametric study was first carried out to understand the effect of various …
-
Interfacial adhesion of thin film high energy density anode materials
… adhesion strength through the technique of laser spallation (LS) combined with finite element analysis (FEA). It was found that the Ni/a-Si interface can withstand at least ~250 MPa in tension before failure is initiated. Tests at higher stress levels were inconclusive due to consistent …
-
Mechanics of electrode materials in lithium battery applications.
… batteries. These effects are probed using a laser spallation technique to quantify the adhesion strength between film and substrate layer. The benefits of surface treatment designed to improve adhesion are also investigated. At last, delamination test of graphite electrode film “sandwiched” …
-
Femtosecond two-pulse laser spall approach for metals and ceramics
… In this thesis, a novel femtosecond two-pulse laser approach is introduced where the front and back surface of a material is simultaneously illuminated. By comparing this method to the conventional single-pulse approach, the unique effects of introducing a secondary laser pulse are demonstrated …
-
Interface Engineering to Enhance the Mechanical Performance of Aluminum Thin Film Deposited on PET Substrate
… prior to the Al deposition. Uniaxial tension and laser-induced thin film spallation tests were performed on the Al film and PET substrate to investigate the effect of the adhesion on the ductility of the Al film. In addition, the effect of substrate thickness was studied using substrates with …
-
Mechanochemical activation at solid interfaces
… are prepared by surface modification. A modified laser spallation setup and finite element scheme are used to analyze energy evolution during dynamic delamination process. The interfacial fracture toughness of the SAM-modified Si-Au interface increases by 86% with the increase in thiol …
-
Molecular tailoring of interfaces for thin film on substrate systems
… modifications on adhesion is assessed using a laser-spallation technique. Laser-induced stress waves are chosen because they dynamically load the thin film interface in a precise, non-contacting manner at high strain rates and are suitable for both weak and strong interfaces. Photodefinable …
-
Dynamic delamination of patterned thin films
… interface. The testing method involves using a laser-induced acoustic stress wave to load the film/substrate fracture plane in tension at very high strain rate (~10^7/s) leading to the inertia-driven interface delamination. A weak adhesive layer is selectively introduced at the interface to …
-
Computational modeling of laser-induced delamination testing of thin films
… that accurately and efficiently characterize it. Laser-induced delamination is a novel technique that uses laser-generated stress waves to load thin films at high strain rates and extract the fracture toughness of the film/substrate interface. The effectiveness of the technique in measuring the …