Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Laser cleaning"”.
-
STUDY OF DAMAGE THRESHOLD OF SUBSTRATE IN LASER CLEANING PROCESS
Laser cleaning is a new cleaning technique. It is one of the most effective technique for removing contaminants. For laser cleaning, a laser is used as a cleaning source. When the substrates needed to be cleaned are irradiated by a laser, the contaminants on the substrate can be removed under …
-
LASER CLEANING OF PARTICULATE FROM SOLID SURFACE WITH A LIQUID FILM
A theoretical model for laser cleaning of particulate from liquid-coated solid surfaces is established by taking adhesion force and cleaning force into account. The adhesion force mainly includes the van der Waals force and the capillary force for particulates on a humid surface. The cleaning force …
-
Characterization the Laser Cleaning Effects on Sandstone From the Canadian Parliament Building
Laser cleaning has been used in the rehabilitation and conservation program of the Canadian Parliament Buildings in order to remove the black crust on sandstone surfaces. This study was carried out to characterize the effect of laser cleaning on sandstone from the Canadian Parliament Buildings. …
-
Investigation of the laser cleaning process for ibs grids in optical coating technology /
This work describes the process of laser cleaning of an Ion-Beam Sputtering (IBS) grid and magnetron sputtering (MS) substrates shutter as an alternative to manual cleaning and sandblasting in terms of the surface morphology, roughness and speed. It has been demonstrated that processing with a …
-
Improvements to Optical Diagnostics of Thermal Barrier Coatings: Contaminant Identification during Laser Cleaning and Time Gated Photoluminescence Piezospectroscopy
Laser ablation has previously been demonstrated as a technique for removal of contaminants from engine-run thermal barrier coatings (TBC). A method for monitoring the concentrations of some of the known constituents of the contaminants is developed for paralleled quantification during laser …
-
PULSE LASER INDUCED SURFACE PROCESSING AND REAL-TIME MONITORING
Audible acoustic waves generated during excimer laser interaction with materials are investigated. It is found that the acoustic wave generation is closely related to the laser cleaning of material surfaces and laser ablation of substrate materials. The waveform changing with laser parameters …
-
Ανάπτυξη μεθοδολογιών διάγνωσης, αποκατάστασης με λέιζερ και ελέγχου της αυθεντικότητας αντικειμένων πολιτιστικής κληρονομιάς
… is collected not only for an effective laser cleaning treatment, but also for the investigation of their authenticity. Initially, the special case of the burnt paintings of the Greek artist Konstantinos Parthenis is studied and the artist’s palette was reconstructed by the analyses with …
-
Optical Near-Field Enhancement by Micro/Nano Particles for Nanotechnology Applications
… enhancement induced by small particles under laser irradiation: (1) optical near-field enhancement effect of dielectric particles for laser cleaning/nanopatterning applications, and (2) plasmonic resonance by metallic nanoparticles. Near-field optics (NFO) deals with optical phenomena …
-
Laser-Induced Breakdown Spectroscopy, Imaging and Machine Learning; for Wind Turbine Blade Materials and Contaminant Analysis
… detection; that is, the point at which the laser has adequately removed contaminants from the current Area of Irradiation before moving to the adjacent AoI must also be determined. In addition to LIBS analysis, this work presents a new laser ablation cleaning protocol validated by …
-
Laser annealing of Ni (001)
Experimental aspects of laser cleaning and annealing of a Ni(1) surface with a pulsed ruby laser are reported. Effects of applying laser energy densities of .4 J/cm to 1.1 J/cm to an Ar-ion sputter-cleaned surface are determined using Auger Electron Spectroscopy (AES), Low Energy Electron …
-
Laser processing of carbon fibre reinforced plastic (CFRP)
… for conventional cutting methods. High power lasers can provide fast and efficient cutting speed, but if not controlled effectively can cause excessive fibre damage that has significant impact on the mechanical strength. Secondly, the joining technology is one of the major obstacles in …
-
Investigating Vacuum Insulator Flashover Resistance of Rexolite and Acrylic Before and After Applying Novel Insulator Cleaning Techniques
… test stand before and after undergoing novel cleaning techniques of pulsed laser cleaning (PLC) and flash lamp annealing (FLA). I then used an established statistical model to determine whether samples retained original flashover resistance post-debris contamination.
-
Micro-scale heat transfer simulation on water with molecular dynamics and hybrid approach
… in various industrial fields, such as laser cleaning, thermal ink-jet printer, medical surgery. The entire process of the boiling phenomena is observed, and a piston-like motion of the film is analyzed. To the end, due to the size limitation of classical molecular dynamics, a hybrid …
-
Investigation of the anti-corrosion properties of trivalent chromium process coatings on various surface pretreatments of aerospace aluminum alloys
… include abrasion and polishing, wet chemical cleaning, and deoxidation or desmutting.In this dissertation project, fundamental research was conducted to better understand how surface pretreatments of aluminum alloys impact the formation of TCP conversion coatings and the mechanisms by which …
-
DIAGNOSTICS AND REAL-TIME MONITORING OF PULSED LASER ABLATION
… and real-time monitoring during pulsed laser ablation of solid materials are investigated. It is found that acoustic, optical and electric signals generated are closely related to laser processing conditions, material surface and bulk properties. A wide band microphone is used to record …
-
Radioaktyviųjų metalinių atliekų lazerinio deaktyvavimo tyrimas /
… of large amounts of waste could be achieved. Laser surface ablation can be used to deactivate radioactive metal surfaces and it is a prospective alternative to currently used sand blasting, which generates secondary waste. The goal of this thesis was to test the feasibility of using a …
-
Využití laserové a ultrazvukové technologie pro dekontaminaci radioaktivních povrchů
… používaných v jaderném průmyslu se zaměřením na laserové a ultrazvukové technologie jako nástroje pro optimalizaci a minimalizaci objemu radioaktivního odpadu vznikajícího při mírovém využívání jaderné energie. První část práce popisuje princip laserového a ultrazvukového čištění, shrnuje …
-
Laserové čištění technických materiálů
Práce se zabývá problematikou vlivu laserového čištění na povrch základního materiálu, resp. na jeho texturu povrchu. Teoretická část práce je zaměřena na charakteristiku laserových technologií, přehled metod čištění povrchu v oblasti strojírenství a na představení společnosti ŽLUTÉ LASERY s.r.o., …
-
Racionalizace čištění technických plastů
… metódy čistenia a úpravy povrchu so zameraním na laserové čistenie. Praktická časť práce sa zaoberá porovnaním chemického čistenia s laserovým čistením technických plastov. Výsledkom experimentu je vyhodnotenie času čistenia a drsnosti povrchu (Ra, Rz) čistených materiálov. Na základe výsledku …
Page 1 of 2