Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Laser patterning"”.

  1. Pulsed laser patterning of Toric contact lens inserts

    Laser patterning is a promising technology for biomedical applications. In this research project, a novel laser based marking method for toric contact eye lenses has been proposed. Toric contact eye lenses are designed to address general blurring that occurs due to uneven cornea which is known as …

    concordia Download PDF for Pulsed laser patterning of Toric contact lens inserts (opens in a new tab)

  2. A nanoparticle laser patterning process to fabricate flexible electronics

    … In this research, a high-throughput nanoparticle laser patterning process for flexible electronics is developed, where nanoparticles are sintered with low power laser while they are selectively deposited to enhance printing quality. Copper and silver particles are successfully deposited on paper …

    gatech Repository record for A nanoparticle laser patterning process to fabricate flexible electronics (opens in a new tab)

  3. Photo-structuring of Organic Layers for Flexible Electronics

    … structures on it. The lithography step for patterning the dielectric was done by photo-illumination at I-line (365nm). Achieved sharp and clear patterns, but the polymer dielectric suffered relatively high layer loss during developing due to poor cross-linking and adhesion. IR and UV/vis …

    chalmers Repository record for Photo-structuring of Organic Layers for Flexible Electronics (opens in a new tab)

  4. Laser fabrication and performance of NiCr strain gauges

    … and allow their use in flexible applications. Laser patterning is a promising choice to replace the conventional lithography-based method for flexible microelectronic fabrications, due to its low process complexity, short development cycle for custom sensor designs and the ability to pattern on …

    waterloo Repository record for Laser fabrication and performance of NiCr strain gauges (opens in a new tab)

  5. Three-Dimensional Biomimetic Patterning to Guide Cellular Migration and Organization

    This thesis develops a novel photopatterning strategy for biomimetic scaffolds that enables spatial and biochemical control of engineered cellular architectures, such as the microvasculature. Intricate tools that allow for the three dimensional (3D) manipulation of biomaterial microenvironments …

    rice Repository record for Three-Dimensional Biomimetic Patterning to Guide Cellular Migration and Organization (opens in a new tab)

  6. Laser assisted nano-optics processing in optical data storage

    … optical lithography techniques, microlens array laser patterning and near-field scanning optical lithography, are presented to show their capabilities in nanostructures fabrication. Laser irradiation through microlens array is used to create nanostructures on phase-change films over a large area. …

    nus Repository record for Laser assisted nano-optics processing in optical data storage (opens in a new tab) Download file for Laser assisted nano-optics processing in optical data storage (opens in a new tab)

  7. Enhancing Ion Transport in Thick Li-ion Battery Electrodes by Pore Engineering

    … our study investigated the tradeoff between laser patterning material loss and electrochemical performance of commercially produced thick and dense high-nickel NCA, graphite, and silicon-blended graphite anodes using high-nickel NCA, graphite, and silicon-blended graphite electrodes with …

    gatech Repository record for Enhancing Ion Transport in Thick Li-ion Battery Electrodes by Pore Engineering (opens in a new tab)

  8. Development of an Endothelial Cell Niche in Three-dimensional Hydrogels

    … growth factor 165 (VEGF165) using multiphoton laser patterning of VEGF165. This is the first demonstration of this patterning technology to immobilize proteins; and the first demonstration of immobilized VEGF165 to guide endothelial cell growth and differentiation in 3D environments. It is …

    toronto-retro Repository record for Development of an Endothelial Cell Niche in Three-dimensional Hydrogels (opens in a new tab)

  9. Laser direct write techniques for the fabrication of paper-based diagnostic devices

    We report on the use of laser direct-write techniques for the fabrication of point-of-care paper-based diagnostic sensors. These include laser-based deposition, laser ablation and laser-induced photo-polymerisation.<br/><br/>Firstly, Laser Induced Forward Transfer (LIFT) was employed to deposit …

    soton Download PDF for Laser direct write techniques for the fabrication of paper-based diagnostic devices (opens in a new tab)

  10. Study of high quality factor resonators

    … magnetic properties of V[TCNE]x. We demonstrate laser patterning to create magnetic structures, reaching micron scale resolution. Our results demonstrate a new method of patterning V[TCNE]x, with potential applications for in situ patterning, which could compensate for growth-to-growth variations …

    cornell Repository record for Study of high quality factor resonators (opens in a new tab)

  11. Laser-based surface functionalisation: advances in durability and 3D processing

    … to achieve such functional responses, direct laser writing is gaining a popularity due to its cost-effectiveness, selectivity and relatively short processing time. It allows surface properties to be modified or tuned by patterning and texturing at micron or submicron scales. However, laser …

    birmingham Download PDF for Laser-based surface functionalisation: advances in durability and 3D processing (opens in a new tab)

  12. COMPACT LASER DRIVEN ELECTRON AND PROTON ACCELERATION WITH LOW ENERGY LASERS

    Laser-driven particle accelerators offer many advantages over conventional particle accelerators. The most significant of these is the magnitude of the accelerating gradient and, consequently, the compactness of the accelerating structure. In this dissertation, experimental and computational …

    maryland Repository record for COMPACT LASER DRIVEN ELECTRON AND PROTON ACCELERATION WITH LOW ENERGY LASERS (opens in a new tab)

  13. Rapid point-of-care testing solutions to meet clinical needs

    … for wider clinical applications. Using the laser-based direct-write (LDW) technique that implements polymerisation of a photopolymer to produce impermeable barriers within the porous membranes inside a LFD I have demonstrated the use of multiple parallel channels for multiplexed detection …

    soton Download PDF for Rapid point-of-care testing solutions to meet clinical needs (opens in a new tab)

  14. Femtosecond Laser Microfabrication of Optofluidic Lab-on-a-chip with Selective Chemical Etching

    … rate (1 MHz) fiber-amplified femtosecond laser with a wavelength of 522 nm was harnessed together with wet-chemical etching for laser-patterning of 3-D optofluidic microsystems in fused silica glass, by the method of Femtosecond Laser Irradiation followed by Chemical Etching (FLICE). …

    toronto-retro Repository record for Femtosecond Laser Microfabrication of Optofluidic Lab-on-a-chip with Selective Chemical Etching (opens in a new tab)

  15. Electronic and optoelectronic devices using grown 2-dimensional materials

    … by thermally assisted selenization. Direct laser patterning was applied for the device fabrication. As-fabricated devices exhibit a satisfactory ON/OFF ratio and fair photoresponse. A comparison study shows that the device with shorter channel width has better photoresponsivity. The …

    oxford Repository record for Electronic and optoelectronic devices using grown 2-dimensional materials (opens in a new tab)

  16. Optical cavities defined by SU-8 photoresist on photonic crystal waveguides

    … the location of the cavity mode is determined by laser patterning of SU-8 – a commercially-available negative photoresist – on top of a conventionally-fabricated PhC waveguide. This method aims towards the goal of achieving deterministic coupling between a self-assembled InGaAs/GaAs quantum dot …

    oxford Repository record for Optical cavities defined by SU-8 photoresist on photonic crystal waveguides (opens in a new tab)

  17. Development of durable antibacterial stainless steel surfaces through plasma nitriding and ultrashort pulsed laser texturing

    … worries for biofouling of the surface. Pulsed laser texturing presents a promising and scalable approach for the introduction of functional antibacterial properties on surfaces. However, due to the thermal nature of laser patterning and the thermodynamic metastability of the S phase, almost no …

    birmingham Download PDF for Development of durable antibacterial stainless steel surfaces through plasma nitriding and ultrashort pulsed laser texturing (opens in a new tab)

  18. Rapid Fabrication of Miniaturized Electric Double-Layer Capacitors Based on Laser Patterned Graphene oxide-Poly (Furfuryl Alcohol) Nanocomposites

    … conductive material using a commercial CO2 laser. High resolution laser patterning of electrodes onto this material results in a micro-supercapacitor with much improved performance compared to state-of-the-art flexible and miniaturized supercapacitors. This thesis work initially focused on …

    waterloo Repository record for Rapid Fabrication of Miniaturized Electric Double-Layer Capacitors Based on Laser Patterned Graphene oxide-Poly (Furfuryl Alcohol) Nanocomposites (opens in a new tab)

  19. Generation and Characterization of Substructures in Graphene

    … strong p-dopant that can be easily fabricated by laser patterning. The crucial discovery of a model system with strong spectroscopic signals will allow further investigation of substructure formation and the improved methodology for statistical analysis of separate structures in graphene with …

    fu-berlin Repository record for Generation and Characterization of Substructures in Graphene (opens in a new tab)

Page 1 of 2