Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Laser printing"”.

  1. 3D Laser Printing of Diamond-based Composites for Thermal Management Applications

    … into intricated designs. In this study, the laser 3D printing of copper/D composite materials is proposed to fabricate highly complex Cu/D structures which could remodel their applications. Before additively manufactured Cu/D composite materials, several challenges need to be addressed. …

    nebraska Repository record for 3D Laser Printing of Diamond-based Composites for Thermal Management Applications (opens in a new tab)

  2. Διεργασίες laser σε νανοϋλικά για εφαρμογές σε οργανικά ηλεκτρονικά

    This dissertation investigates the laser-matter interaction, focusing on the field of 2D materials such as graphene, graphene oxide and reduced graphene oxide. During the last decade, 2D materials have attracted significant research interest due to their unique mechanical and optoelectronic …

    greece Repository record for Διεργασίες laser σε νανοϋλικά για εφαρμογές σε οργανικά ηλεκτρονικά (opens in a new tab)

  3. Visualization of high-resolution digital terrain

    … variable gamma ramp capability. and the camera (laser printing) capability. Captain Zanoli was responsible for file input/output, elevation contour map and aerial photo display, initial three-dimensional terrain display, and data panel performance measurements.

    nps Repository record for Visualization of high-resolution digital terrain (opens in a new tab)

  4. Carbon-based polymer nanocomposites with enhanced conductive properties

    … circuits integrated in nanocomposite, a laser printing process was successfully exploited in order to obtain electrical conductive paths on the surface of a polymeric materials containing MWCNTs. Starting from the literature knowhow and new experimental results, a complete comprehension …

    poli-torino Repository record for Carbon-based polymer nanocomposites with enhanced conductive properties (opens in a new tab)

  5. Charge Distribution Inversion for Supermicrometer Particles via Differential Mobility Analysis and Optical Particle Spectrometry

    … has long been of use for applications in laser printing, electrophotography, and electrostatic powder coating. Effective charge control is difficult, however, without an accurate understanding of particle charge state distributions. Traditional methods of charge state characterization, …

    umn Repository record for Charge Distribution Inversion for Supermicrometer Particles via Differential Mobility Analysis and Optical Particle Spectrometry (opens in a new tab)

  6. Centrifugal-Driven, Reduced-Dimension, Planar Chromatography and Nanoscribe Mesh Filters for Separations

    … in the work herein proposed the use of micro 3D laser printing to create mesh filters in channels for the separation of nanoparticles suspended in solutions of low volume, as well as a system allowing the study of diffusion of particles through the mesh filters.</p>

    utk-theses Repository record for Centrifugal-Driven, Reduced-Dimension, Planar Chromatography and Nanoscribe Mesh Filters for Separations (opens in a new tab)

  7. Laser-microdrop Interactions in Nanoparticle Deposition on Solid Substrates

    … substrates by a process called nano electrospray laser deposition. In this research, three deposition methods, contact liquid line laser printing, nano-electrospray laser sintering and evaporative optical Marangoni convection are investigated experimentally and analytically. Thin silver lines are …

    ucf Repository record for Laser-microdrop Interactions in Nanoparticle Deposition on Solid Substrates (opens in a new tab)

  8. PRANCŪZIŠKOJO ĮRIŠIMO KNYGŲ GRUPĖ „TRADICIJA IR DABARTIS“ /

    … Book cover fabrics used - modern technology - laser burning of the skin. On the part design , the, computer equipment, laser printing, and project on canvas (size: 1500 x 1000 mm). It introduces the idea of the work, the concept of the creative work in photography. The inventory in question, …

    vilnius Repository record for PRANCŪZIŠKOJO ĮRIŠIMO KNYGŲ GRUPĖ „TRADICIJA IR DABARTIS“ / (opens in a new tab)

  9. Towards the Control of Electrophotographic-based 3-Dimensional Printing: Image-Based Sensing and Modeling of Surface Defects

    … used for decades for fast, cheap, and reliable printing in offices and homes around the world. It has been shown that extending the use of EP for 3D printing is feasible; multiple layered prints are already commercially available (color laser printers) but only for a very limited number of …

    rit Repository record for Towards the Control of Electrophotographic-based 3-Dimensional Printing: Image-Based Sensing and Modeling of Surface Defects (opens in a new tab)

  10. Ανάπτυξη εκτύπωσης μεταλλικών και άλλων υλικών με χρήση laser για την κατασκευή εύκαμπτων οργανικών φωτοβολταϊκών

    … work focuses on the study and application of the Laser-Induced Forward Transfer (LIFT) technique for the fabrication of flexible electronic devices. Through its chapters, the research covers theoretical foundations, experimental implementation, and results in practical applications. The first …

    greece Repository record for Ανάπτυξη εκτύπωσης μεταλλικών και άλλων υλικών με χρήση laser για την κατασκευή εύκαμπτων οργανικών φωτοβολταϊκών (opens in a new tab)

  11. Digital Microfluidics for Integration of Lab-on-a-Chip Devices

    … prototyping techniques, including the use of laser printing to pattern flexible printed circuit board (PCB) substrates, to make the technology accessible and less expensive. Using these techniques, both digital and channel microfluidic devices can be produced in less than 30 minutes at a …

    toronto-retro Repository record for Digital Microfluidics for Integration of Lab-on-a-Chip Devices (opens in a new tab)

  12. Silicio karbido įtaka lydinių, suformuotų lazerinio metalo 3D spausdinimo būdu /

    … composite mixture (94% 17-4 PH + 6% SiC) for 3D printing, to evaluate the influence of SiC on 17-4 PH stainless steel during printing at different energy density values, and to evaluate the quality of the obtained alloys. 17-4 PH stainless steel is one of the most commonly used materials in the …

    vilnius Repository record for Silicio karbido įtaka lydinių, suformuotų lazerinio metalo 3D spausdinimo būdu / (opens in a new tab)

  13. Υψηλής ταχύτητας εκτύπωση με laser μη νευτώνειων αγώγιμων μελανιών μεταλλικών νανοσωματιδίων για την ανάπτυξη μικροηλεκτρονικών διατάξεων

    … have been developed. One of the most promising printing techniques, incorporating the above specifications, is the Laser Direct Printing (LDP) technique, or Laser-Induced Forward Transfer (LIFT) technique. LIFT has significant advantages over other printing techniques, such as, compatibility …

    greece Repository record for Υψηλής ταχύτητας εκτύπωση με laser μη νευτώνειων αγώγιμων μελανιών μεταλλικών νανοσωματιδίων για την ανάπτυξη μικροηλεκτρονικών διατάξεων (opens in a new tab)

  14. L'art musicale, 1860-70, 1872-94 : prototype RIPM catalogue and keyword-author index : an assay of RIPM methodology and introductory study of the journal

    … a system employing computer technology and laser printing techniques for producing computer-generated catalogues and indexes in a camera-ready format. Throughout the developmental stages, the initially proposed indexing methodology has undergone revisions. Moreover, steps towards the …

    ubc Repository record for L'art musicale, 1860-70, 1872-94 : prototype RIPM catalogue and keyword-author index : an assay of RIPM methodology and introductory study of the journal (opens in a new tab) Download PDF for L'art musicale, 1860-70, 1872-94 : prototype RIPM catalogue and keyword-author index : an assay of RIPM methodology and introductory study of the journal (opens in a new tab)

  15. Laser and 3-Dimensional Printers: Characterizing Emissions and Occupational Exposures

    … and manufacturing has led to conception of laser and 3- dimmensional (3-D) printers in various indoor workplaces. The indoor environment is one of the most important determinants of personal exposure. Introducing laser and 3-D printers to indoor workplaces, introduces a potential indoor …

    wvu Repository record for Laser and 3-Dimensional Printers: Characterizing Emissions and Occupational Exposures (opens in a new tab)

  16. Additive Manufacturing of Freeform Optics

    … Additive manufacturing (AM), so-called 3D printing, keeps increasing the attention in both academics and industries by its potential to produce complex optical geometrics, rapid optical system prototyping, and multi-functional optical applications. To meet the requirements for more …

    arizona-thes Repository record for Additive Manufacturing of Freeform Optics (opens in a new tab)

  17. Development of analytical methods to quantify furan and alkyl furans in Belgian foodstuffs: from contamination levels, formation processes to preliminary risk assessment of the Belgian population

    … to chocolate processing, both tempering and laser printing can increase the total furan concentration by up to 24% and 31% respectively. (5) We conducted an online survey on coffee brand loyalty among Belgian coffee consumers. The consumption dataset generated from this survey (1930 …

    liege Repository record for Development of analytical methods to quantify furan and alkyl furans in Belgian foodstuffs: from contamination levels, formation processes to preliminary risk assessment of the Belgian population (opens in a new tab) Restricted access

  18. Αλληλεπίδραση ακτινοβολίας λέιζερ και οργανικών υλικών με εφαρμογές σε μικρο – αισθητήρες

    In this PhD Thesis the interaction of nanosecond laser pulses with organic materials was investigated for the selective deposition of micro-patterns with a high spatial resolution. The selective deposition of the materials was carried out by using a novel laser printing technique named Laser …

    greece Repository record for Αλληλεπίδραση ακτινοβολίας λέιζερ και οργανικών υλικών με εφαρμογές σε μικρο – αισθητήρες (opens in a new tab)

Page 1 of 2