Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Lasers in engineering."”.

  1. Multiple material selective laser sintering

    The components making up modern devices must in general fulfill functional requirements which vary spatially throughout the component and are satisfied by the properties of the materials making up the component. Thus, it is necessary to vary the material properties in a spatial sense to properly …

    texas Repository record for Multiple material selective laser sintering (opens in a new tab)

  2. Advanced laser processing and photoluminescence characterisation of high efficiency silicon solar cells

    Many current technologies used in solar cell fabrication have been successfully adapted from the integrated circuits industry. The success of laser processing applications in this industry indicates that such techniques should be considered to reduce manufacturing costs and to improve electrical …

    unsw Repository record for Advanced laser processing and photoluminescence characterisation of high efficiency silicon solar cells (opens in a new tab)

  3. Modeling and fabrication of prosthetic sockets using selective laser sintering

    Successful rehabilitation of transtibial amputees involves effective fitting of prosthetic components. However, conventional techniques used to produce sockets with suitable characteristics are labor intensive and expensive, and depend on the work of skilled prosthetists that are relatively scarce …

    texas Repository record for Modeling and fabrication of prosthetic sockets using selective laser sintering (opens in a new tab)

  4. Characteristics of Laser-Induced Plasma Flame Kernel Formation and Evolution

    With increasing interest to engineer more efficient combustion engines, the use of laser induced ignition demonstrates to be a compelling alternative to the conventional electric spark plug. The benefits greatly outweigh those found in a conventional electric spark motor whereas research shows …

    odu Repository record for Characteristics of Laser-Induced Plasma Flame Kernel Formation and Evolution (opens in a new tab)

  5. Indirect rapid manufacturing of silicon carbide composites

    Rapid manufacturing has been a goal since the development of rapid prototyping in the mid to late 1980’s. The term refers to using Rapid Prototyping techniques, capable of rendering objects directly from CAD files, to produce fully functional parts. Yet, significant barriers to realizing rapid …

    texas Repository record for Indirect rapid manufacturing of silicon carbide composites (opens in a new tab)

  6. Laser target triggering of gas switches

    Laser target triggering has been investigated at the University of Missouri as a method to reduce the laser energy required to trigger a laser triggered gas switch. Laser targets were solid materials embedded into the cathode of a LTGS that acted as a source of plasma when struck by a triggering …

    missouri Repository record for Laser target triggering of gas switches (opens in a new tab)

  7. Modeling of selective laser sintering of single-component metal powders

    … AT AUTHOR'S REQUEST.] Selective Laser Sintering (SLS) is a rapid prototyping technology which enables freeform fabrication of complex-geometry components directly from three-dimensional CAD data and is widely applied to the processing of single-component metal powders in the past years …

    missouri Repository record for Modeling of selective laser sintering of single-component metal powders (opens in a new tab)

  8. Nd:YAG laser beam forming of titanium alloy sheets

    Includes bibliographical references (pages 164-168).

    colo-mines Repository record for Nd:YAG laser beam forming of titanium alloy sheets (opens in a new tab)

  9. Table-top, full-field, actinic microscope for extreme ultraviolet lithography mask characterization

    The development of increasingly smaller, faster, and more complex electronic devices that significantly impact everyday life is driven by the ability of printing smaller and smaller components onto semiconductor chips. The number of transistors printed onto an integrated circuit has increased from …

    colostate Repository record for Table-top, full-field, actinic microscope for extreme ultraviolet lithography mask characterization (opens in a new tab)

  10. An Injection Modelocked Titanium-Sapphire Laser

    I have investigated the possibility of using an injection modelocked Ti-sapphire laser as a illumination source for GaAs photocathodes. A commercial Ti-sapphire laser was modified to accept a seed pulse from a gain-switched diode laser. Modelocked operation was obtained through gain modulation …

    odu Repository record for An Injection Modelocked Titanium-Sapphire Laser (opens in a new tab)

  11. Surface Engineering and Characterization of Laser Deposited Metallic Biomaterials

    Novel net shaping technique Laser Engineered Net shaping™ (LENS) laser based manufacturing solution (Sandia Corp., Albuquerque, NM); Laser can be used to deposit orthopedic implant alloys. Ti-35Nb-7Zr-5Ta (TNZT) alloy system was deposited using LENS. The corrosion resistance being an important …

    unt Repository record for Surface Engineering and Characterization of Laser Deposited Metallic Biomaterials (opens in a new tab)

  12. Runtime and jitter of a laser triggered gas switch

    … of Missouri has studied parameters affecting the runtime and jitter of a laser triggered gas switch. Experiments tested a variety of switch parameters including percentage of self-break and charge voltage. The effects of laser beam parameters were also considered, including focal length, …

    missouri Repository record for Runtime and jitter of a laser triggered gas switch (opens in a new tab)

  13. Free-running chip-based dual-comb vibrometry

    … laser based vibrometry is the standard for measuring vibrations otherwise not accessible using mechanical vibration measurement techniques. Laser Doppler vibrometers are a commercially available laser vibrational technique, however sensitivity is limited by laser speckle noise, and a short …

    adelaide Repository record for Free-running chip-based dual-comb vibrometry (opens in a new tab)

  14. Laser Surface Treatment of Amorphous Metals

    … soft magnetic materials and also as surface coatings to improve the surface properties. Furthermore, the nanocrystalline materials derived from their amorphous precursors show superior soft magnetic properties than amorphous counter parts for transformer core applications. In the present work, …

    unt Repository record for Laser Surface Treatment of Amorphous Metals (opens in a new tab)

  15. Microstructure Evolution in Laser Deposited Nickel-Titanium-Carbon in situ Metal Matrix Composite

    … metal matrix composites have been processed using the laser engineered net shaping (LENS) process. As nickel does not form an equilibrium carbide phase, addition of a strong carbide former in the form of titanium reinforces the nickel matrix resulting in a promising hybrid material for both …

    unt Repository record for Microstructure Evolution in Laser Deposited Nickel-Titanium-Carbon in situ Metal Matrix Composite (opens in a new tab)

  16. Microstructural Phase Evolution In Laser Deposited Compositionally Graded Titanium Chromium Alloys

    … Ti-xCr (10≤x≤30 wt%) alloy has been fabricated using Laser Engineered Net Shaping (LENSTM) to study the microstructural phase evolution along a compositional gradient in both as-deposited and heat treated conditions (1000°C followed by furnace cooling or air cooling). The alloys were characterized …

    unt Repository record for Microstructural Phase Evolution In Laser Deposited Compositionally Graded Titanium Chromium Alloys (opens in a new tab)

  17. An Automated Grid-Based Robotic Alignment System for Pick and Place Applications

    … an automated grid-based alignment system utilizing lasers and an array of light-detecting photodiodes. The intent is to create an inexpensive and scalable alignment system for pick-and-place robotic systems. The system utilizes the transformation matrix, geometry, and trigonometry to determine …

    iupui Repository record for An Automated Grid-Based Robotic Alignment System for Pick and Place Applications (opens in a new tab)

Page 1 of 2