Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"Lateral Deflection"”.

  1. Analytical Model for Lateral Deflection in Cold-formed Steel Framed Shear Walls with Steel Sheathing

    An analytical model for lateral deflection in cold-formed steel shear walls sheathed with steel is developed in this research. The model is based on the four factors: fastener displacement, steel sheet deformation, and hold-down deformation, which are from the effective strip concept and a …

    unt Repository record for Analytical Model for Lateral Deflection in Cold-formed Steel Framed Shear Walls with Steel Sheathing (opens in a new tab)

  2. Analytical and experimental analysis of long wavelength waviness generated by wire lateral deflection on the wire-sawn ductile material surface for semiconductor application

    <p>The research goals of this project are to understand the fundamental mechanics of the long wavelength waviness in wire-sawed silicon wafers. Combinations of analytical and experimental observations are pursued. A mechanistic model will be developed for long wavelength waviness generation. …

    iastate Repository record for Analytical and experimental analysis of long wavelength waviness generated by wire lateral deflection on the wire-sawn ductile material surface for semiconductor application (opens in a new tab)

  3. A deflection theory for anisotropic plates in which coupling between lateral deflection and in-plane displacement is present and the effect of coupling on the buckling load

    … expression may be used either in small- or large-deflection analysis. Equations of equilibrium are presented for both small- and large-deflection theory. The second purpose of the present paper is to determine the effect of coupling on deflections and buckling of a simple supported anisotropic …

    vt Repository record for A deflection theory for anisotropic plates in which coupling between lateral deflection and in-plane displacement is present and the effect of coupling on the buckling load (opens in a new tab)

  4. Cálculo aproximado da deflexão lateral em edifícios altos

    … aims to present ways for a quick calculation of lateral deflection of multistory buildings. At preliminary stage of design, the use of approximate methods is very interesting, because use of computer programs with preliminary data is not a good practice. A method to do the compatibility of the …

    brazil-uerj Repository record for Cálculo aproximado da deflexão lateral em edifícios altos (opens in a new tab)

  5. An improvement of Southwell's method for determining buckling loads

    … to increasing compressive axial load, the lateral deflection, measured anywhere along its length, increases monotonically; the primary buckling mode becoming more and more dominant in the deflected shape. A classical approximate technique, due to R.V. Southwell, correlates axial load and …

    nps Repository record for An improvement of Southwell's method for determining buckling loads (opens in a new tab)

  6. Investigation of spring valves

    … mode, resulting in a very low fatigue life. The lateral deflection mode did not exhibit these oscillations but did exhibit a surge phenomenon at higher pressures. A four-way closed center spring valve was built using four exter­nally pressurized springs operating in the lateral deflection mode. A …

    sask Repository record for Investigation of spring valves (opens in a new tab)

  7. Forced lateral motion of deep-water drill strings

    An equation of motion governing lateral deflection, considering elastic, dynamic, and drag forces is derived. This equation is applied to three different classes of drill string behavior: a beam with constant axial tension, a perfectly flexible cable, and a beam with linearly varying axial tension. …

    rice Repository record for Forced lateral motion of deep-water drill strings (opens in a new tab)

  8. Relaxation of prestressed steel used in construction of the confederation bridge

    … program, namely, the release method and the lateral deflection method. A special setup is built for each of the two testing methods. Six specimens are tested using the release testing method. Of these, two specimens are tested at each of the three initial stress levels: 60%, 70% and 80% of …

    concordia Download PDF for Relaxation of prestressed steel used in construction of the confederation bridge (opens in a new tab)

  9. Micropile response to combined loading

    … foundations subjected to simultaneous axial and lateral (combined) loading, including an assessment of the impact of axial load on lateral behavior of micropiles. This research project consisted of three experimental tasks to evaluate the effect of combined loading on micropiles. Task 1 consisted …

    must-thes Repository record for Micropile response to combined loading (opens in a new tab)

  10. CONTRIBUTION OF FLOOR SLABS TO LATERAL RIGIDITY OF TALL BUILDINGS

    … ignoring the contribution of floor slab to the lateral resistance of buildings. In this dissertation two building models are analysed using 3D rectangular beam model, 3D T-beam model and full finite element analysis including the floor slab. The lateral displacements of all the models are …

    nus Repository record for CONTRIBUTION OF FLOOR SLABS TO LATERAL RIGIDITY OF TALL BUILDINGS (opens in a new tab) Download file for CONTRIBUTION OF FLOOR SLABS TO LATERAL RIGIDITY OF TALL BUILDINGS (opens in a new tab)

  11. New sensors and estimation systems for the measurement of tire-road friction coefficient and tire slip variables.

    … maneuvers, even when the longitudinal and lateral accelerations are both zero. A key challenge in the development of the estimation system is the need to remove the influence of vibrations and the influence of vehicle maneuvers from the measured signal of a force sensor. An adaptive …

    umn Repository record for New sensors and estimation systems for the measurement of tire-road friction coefficient and tire slip variables. (opens in a new tab)

  12. Modeling and behavior of prestressed concrete spandrel beams.

    … make such designs unfeasible. In particular, lateral deformations developing at the top and bottom of a slender spandrel beam need to be investigated for short-term and long-term loading effects. Spandrels in parking garages typically support double-tee beams (or double tees) on ledges, spot …

    umn Repository record for Modeling and behavior of prestressed concrete spandrel beams. (opens in a new tab)

  13. Elastic columns under half-sine pulse loading.

    … the duration of the load pulse is decreased, the lateral deflection at failure becomes progressively smaller and the effects of axial inertia become increasingly significant.

    nps Repository record for Elastic columns under half-sine pulse loading. (opens in a new tab)

  14. Modeling and Validation of S-Drive: A Nestable Piezoelectric Actuator

    … on the other two beams to produce a large lateral deflection in the form of an `s' shape. The s-drive gets its name from the characteristic `s' shape that appears upon actuation. The designs of one-dimensional (1D) and two-dimensional (2D) arrays of axial-mode and shear-mode s-drives, for …

    purdue-thes Repository record for Modeling and Validation of S-Drive: A Nestable Piezoelectric Actuator (opens in a new tab)

  15. Buckling near a hole in an infinite plate under tension

    … together with expressions for the corresponding lateral deflection patterns. The results are in the form S[cr] = KE(t/a)[2] where E is Young's modulus of elasticity, t is plate thickness, a is hole radius, and K is a bubckling coefficient having the following values for the first four modes: …

    nps Repository record for Buckling near a hole in an infinite plate under tension (opens in a new tab)

  16. Evaluation of lateral strength and deflection for unreinforced masonry cracked walls

    An evaluation methodology for lateral strength and deflection of unreinforced masonry cracked walls is developed in this study. With this approach, the post cracked behavior is considered by neglecting the shear transfer across the cracked masonry. Based on the developed shear and normal stress …

    uiuc Repository record for Evaluation of lateral strength and deflection for unreinforced masonry cracked walls (opens in a new tab)

  17. An experimental investigation of the bifurcation in twisted square plates

    … loading was examined. In order to eliminate lateral deflection of the test plates due to their own weight, a special loading apparatus was constructed which held the plates in a vertical plane. The complete strain field occurring at the plate centre was measured using two strain gauge …

    ubc Repository record for An experimental investigation of the bifurcation in twisted square plates (opens in a new tab) Download PDF for An experimental investigation of the bifurcation in twisted square plates (opens in a new tab)

  18. Analysis and Design of a New Generation GFRP Wind Turbine Tower

    … as a soft-soft tower and that, in general, the lateral deflection limitation is a governing factor in the design of GFRP wind turbine tower. The proposed section met all the design requirements and the fabrication drawings are provided for the further study of full scale test.

    manitoba Repository record for Analysis and Design of a New Generation GFRP Wind Turbine Tower (opens in a new tab)

  19. Influence of Creep on the Stability of Pultruded E-Glass/Polyester Composite Columns at Elevated Service Temperatures

    … pinned-pinned boundary conditions. Midheight lateral deflection and axial shortening were recorded incrementally for the duration of the testing. Following termination of the creep tests, the columns were allowed to recover and tested for buckling strength. A semi-empirical model for long-term …

    gatech Repository record for Influence of Creep on the Stability of Pultruded E-Glass/Polyester Composite Columns at Elevated Service Temperatures (opens in a new tab)

  20. CENTRIFUGE MODEL STUDY OF TUNNEL-SOIL-PILE INTERACTION IN SOFT CLAY

    … axial (settlement and axial force) and lateral (deflection and bending moment) responses on adjacent pile foundations. As a result, the foundations may not be able to resist the loads induced by tunnelling nearby. In this thesis, the results of a series of centrifuge model tests …

    nus Repository record for CENTRIFUGE MODEL STUDY OF TUNNEL-SOIL-PILE INTERACTION IN SOFT CLAY (opens in a new tab) Download file for CENTRIFUGE MODEL STUDY OF TUNNEL-SOIL-PILE INTERACTION IN SOFT CLAY (opens in a new tab)

Page 1 of 3