Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 149 for “"Lateral Forces"”.
-
Axially accelerated saboted rods subjected to lateral forces.
… performance of a sabot/rod as it is subjected to lateral and axial loading during launch is presented. The methodology described incorporates the experimental and numerical portions of the evaluation. Three separate sabot/rod designs are evaluated for their performance in the launch tube and are …
-
Ability of Cylindrical Root Form Implants to Withstand Controlled Lateral Forces
The ability of root form implants to withstand lateral forces has been investigated in animal model. Two new techniques for quantification of forces generated by a loading device have been developed and tested. The strain gages bonded to the loading device were calibrated either intraorally by a …
-
FINITE ELEMENT MODELING OF LASER DAMAGE-INDUCED DRAG AND LATERAL FORCES ON AN AIRBORNE OBJECT
… of a notional missile to study the stresses and forces induced, as the penetration depth increases.
-
Investigations of nanoindentation data obtained by the combination of normal and mixed (normal and lateral) forces
… die auf der Applikation einer definierten Lateralkraft in einem Indentationsexperiment beruhen. Bei der Auswertung dieser neuen experimentellen Methoden stellte sich heraus, dass die auf dem theoretischen Modell basierenden Fittingprozeduren einen subjektiven Faktor aufweisen, sodass je …
-
A Comparison of Optimized Nonlinear Time History Analysis and the Equivalent Lateral Forces Method for Brace Design
… base shear, and the distribution of equivalent lateral forces. Yielding and drift criteria are then used to determine brace areas. This design procedure is referred to throughout the thesis as the "Equivalent Lateral Force Procedure" (ELF). The thesis compares results from the NTHO and ELF …
-
An Investigation and Comparison of Accepted Design Methodologies for the Analysis of Laterally Loaded Foundations
… and pile groups are frequently subjected to high lateral forces. The safety and functionality of many structures depends on the ability of the supporting pile foundation to resist the resulting lateral forces. In the analysis and design of laterally loaded piles, two criterions usually govern. …
-
Cyclic Loading Response of Reinforced Concrete Tilt-Up Structures With Plywood Diaphragms
… structures with plywood roof diaphragms to lateral forces is controlled primarily by the behavior of the plywood roof diaphragms. The response is controlled secondarily by the connections between longitudinal and transverse wall panels and the loads for cracking of the longitudinal wall …
-
A Hysteresis Model for Reinforced Concrete Space Frame Structures
… plasticity theory. Other relationships between lateral forces and stiffnesses are also included in the formulation. A change of yielding surface size is used to account for axial load variations.
-
Water Transport Terminal
… supported by itself, and also helps mitigate the lateral forces of wind and water in which it would stand. The conical form and scale achieved in the proposal would also help create a landmark to the city's growing skyline. It also acts as the point of threshold between land and water, providing …
-
Seismic strengthening by providing structural diaphragm
… Because there was little redundancy in the lateral load resisting system, many precast buildings were damaged beyond repair during the 1999 earthquakes in Turkey. In the present study, a rehabilitation scheme is proposed to add a structural diaphragm at the roof level by adding diagonal …
-
Methods of evaluating the stability and safety of gravity earth retaining structures founded on rock
… on the backs of retaining walls. These shear forces have a very important stabilizing effect on the walls. Expressed in terms of a vertical shear stress coefficient (Kᵥ - r<sub>xy</sub>/σᵥ), this shear loading was found to range in value from 0.09 to 0.21, depending on the geometrical features …
-
Identification of Tire Dynamics Based on Intelligent Tire
… on tire-road contact characteristics e.g., slip, forces and deformation of tires. Vehicle control systems such as ABS and VSP (Vehicle Stability Program) can be enhanced by leveraging this information since control algorithms can be updated based on directly measured parameters from intelligent …
-
Predictions of Knee Joint Contact Forces Using Only Kinematic Inputs with a Recurrent Neural Network
BACKGROUND: Knee joint contact (bone on bone) forces are commonly estimated using surrogate measures such as external knee adduction moments (with limited success) or musculoskeletal modeling (more successful). Despite its capabilities, modeling is not optimal for clinicians or persons with limited …
-
On real time adaptive and dynamically constrained control allocation for stability control of heavy vehicles
… the rate of accidents. Roll-over occurs when the lateral forces are too high. A controller is therefore proposed to reduce the lateral forces under critical situations. Yaw instability, in the form of over- and understeer, is also critical for vehicles. Therefore a combined controller which …
-
Development of Prediction Methods for the Lateral Anchorage Requirements in Metal Building Roof Systems
… or Z-section purlins require restraint to resist lateral forces developed within the roof system under gravity loads. The currently available procedures for predicting these forces have been shown to be inaccurate for sloped roofs and difficult to apply to roof configurations with multiple points …
-
Residual stress measurement of plates using shearography
… reduced. Thin-kerf saw blades are susceptible to lateral forces during cutting. To combat this behavior, saw lers introduce residual stresses into the blades. Classical methods for monitoring saw blade tension, such as the light-gap method, are subjective and analog. There exists a necessity to …
-
A zero slip vehicle dynamics model for virtual reality applications
… of the mass center. The application of traction forces is enabled with an energy balance formulation, which eliminates the need to calculate lateral forces. Examples showed that the model performs well in low speed maneuvering including low speed jackknifing while backing up.</p>
-
ENGINEERING COMPLEX LIGHT-MATTER INTERACTION FOR ADVANCED OPTICAL MICROMANIPULATION
… of chiral objects is demonstrated via reversible lateral forces. In addition, by engineering the environment surrounding the chiral objects, the chirality sorting is also achieved at the interface between two media. Second, the first demonstration of a deep subwavelength optical spanner based on …
-
Computer Solution for Calculating the Active Horizontal Pressure in Soil
… written in FORTRAN IV language to calculate the lateral active earth pressures due to soil, ground water and the normal surcharge loads in granular soil. An attempt has been made to cover the minute details of calculation and display all the calculated lateral forces.
Page 1 of 8