Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"Lateral Load Distribution"”.

  1. Lateral load distribution in beam and slab highway bridges

    … is concerned with the problem of transverse load distribution in slab and girder highway bridges. Six slab and girder highway bridges that were tested to failure are analyzed to estimate their yield moment capacity utilizing different load distribution methods. The remainder of this chapter …

    ut-knoxville Repository record for Lateral load distribution in beam and slab highway bridges (opens in a new tab)

  2. Lateral Load Distribution Factors for Military Vehicles on Multi-Girder Deck Slab Bridge Systems

    … Officials (ASHTO) specifications have prescribed lateral load distribution factors to calculate the bending moments and shear forces for the design of highway bridges for civilian highway traffic. The maximum bending moments and shear forces caused by a wheel line load (or the entire vehicle) …

    vt Repository record for Lateral Load Distribution Factors for Military Vehicles on Multi-Girder Deck Slab Bridge Systems (opens in a new tab)

  3. Lateral Load Distribution and Deck Design Recommendations for the Sandwich Plate System (SPS) in Bridge Applications

    … SPS. The key issues that will be studied include lateral load distribution, dynamic load allowance and deck design methodologies. With SPS being new to the market, there has only been a single bridge application, limiting the investigations of in-service behavior. The Shenley Bridge was tested …

    vt Repository record for Lateral Load Distribution and Deck Design Recommendations for the Sandwich Plate System (SPS) in Bridge Applications (opens in a new tab)

  4. In-plane stiffness of cross-laminated timber floors

    … of CLT floor diaphragms and addresses the lateral load distribution within buildings containing CLT floors. In practice, it is common to assume the floor diaphragm as either flexible or rigid, and distribute the lateral load according to simple hand calculations methods. Here, the …

    ubc Repository record for In-plane stiffness of cross-laminated timber floors (opens in a new tab) Download PDF for In-plane stiffness of cross-laminated timber floors (opens in a new tab)

  5. Measured deflections of a four girder bridge under varying bracing conditions

    … of bottom flange, impact factors on girders, and lateral load distribution from two different bracing conditions under a controlled load and normal traffic loads on the Holston River Bridge located in Knoxville, TN. The two controlled load tests performed were a crawl (static) and speed (dynamic) …

    ut-knoxville Repository record for Measured deflections of a four girder bridge under varying bracing conditions (opens in a new tab)

  6. Evaluation of the Dupont Access Bridge

    … is designed to act continuously under the dead load. The connection consists of a tension plate bolted to the top flange of the girders at the pier and a wedge plate welded to the bottom flange of the girders. This Thesis also describes the measured and predicted lateral load distribution of the …

    ut-knoxville Repository record for Evaluation of the Dupont Access Bridge (opens in a new tab)

  7. The Seismic Performance of Coupled Reinforced Concrete Walls

    … in modern building construction as the primary lateral-load resisting system. Common core wall configurations include solid walls in one direction and walls with openings in the orthogonal direction to access elevators or to meet architectural requirements. Therefore, in the orthogonal …

    washington Repository record for The Seismic Performance of Coupled Reinforced Concrete Walls (opens in a new tab)

  8. Fatigue Life Evaluation of the Diefenbaker Bridge Using Structural Health Monitoring

    … to characterize in-situ bridge behaviour (i.e., lateral load distribution, degree of composite action, and dynamic load influence) and to evaluate the bridge’s remaining fatigue life using various methods of fatigue life evaluation, including deterministic methods (including the method outlined …

    sask Repository record for Fatigue Life Evaluation of the Diefenbaker Bridge Using Structural Health Monitoring (opens in a new tab)

  9. The Performance and Behavior of Deck-to-Girder Connections for the Sandwich Plate System (SPS) in Bridge Deck Applications

    An innovative approach to possible construction or rehabilitation of bridge decks can be found in a bridge construction system called the Sandwich Plate System (SPS). The technology developed and patented by Intelligent Engineering Canada Limited in conjunction with an industry partner, Elastogran …

    vt Repository record for The Performance and Behavior of Deck-to-Girder Connections for the Sandwich Plate System (SPS) in Bridge Deck Applications (opens in a new tab)