Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1598 for “"Layer Thickness"”.

  1. Ellipsometric techniques for determining oxide layer thickness on aluminum.

    … is an optical tool used for measuring the thickness of extremely thin films. Ordinarily, useful results can be obtained only for very smooth layers of uniform thickness. This study describes an attempt to employ ellipsometric techniques to rough, non-uniform layers such as the natural oxide …

    ttu Repository record for Ellipsometric techniques for determining oxide layer thickness on aluminum. (opens in a new tab)

  2. The effect of PCG layer thickness on bendability of aluminum extrusion alloys

    … as these alloys are prone to forming a surface layer known as the Peripheral Coarse Grain (PCG) zone. The objective of this study is to investigate the effect of the PCG layer thickness on bendability of aluminum alloys. Different PCG layers thicknesses were achieved in the range of 50 μm to 800 …

    ubc Repository record for The effect of PCG layer thickness on bendability of aluminum extrusion alloys (opens in a new tab) Download PDF for The effect of PCG layer thickness on bendability of aluminum extrusion alloys (opens in a new tab)

  3. The Effect of Smectite Layer Thickness and Fabric Upon Salt Filtration at Room Temperature

    … brine approached random fabric. Clay cake thicknesses ranged from 0.5 to 2 centimeters, confining pressure was 5000 pounds per square inch, mean brine pressure was 2300 pounds per square inch, and the differential fluid pressure across the clay cake was 1000 pounds per square inch for …

    uiuc Repository record for The Effect of Smectite Layer Thickness and Fabric Upon Salt Filtration at Room Temperature (opens in a new tab)

  4. Methodologies for Analyzing Retinal Nerve Fiber Layer Thickness/Area Using Spectral Domain Optical Coherence Tomography.

    … is the peripapillary retinal nerve fiber layer (RNFL), a surrogate for the total ganglion cell content within the eye. With technologies such as spectral domain optical coherence tomography (SD OCT), the RNFL thickness can be quantified with resolutions approaching 5 µm. Although these …

    houston Repository record for Methodologies for Analyzing Retinal Nerve Fiber Layer Thickness/Area Using Spectral Domain Optical Coherence Tomography. (opens in a new tab)

  5. Effect of powder characteristics and layer thickness on the densification of Selective Laser Melted CoCrMo

    … fabricates parts according to a CAD design in a layer-by-layer fashion by melting metal powder. There are a vast number of powder-related parameters in SLM, including the powder size, shape, distribution, and layer thickness. These parameters have a direct impact on the laser-powder interaction …

    nwu-za Repository record for Effect of powder characteristics and layer thickness on the densification of Selective Laser Melted CoCrMo (opens in a new tab)

  6. Use of computational fluid dynamics to improve the layer thickness control of polyester based multilayered films

    Multilayered films are formed via coextrusion when separately extruded polymer melt streams come together in either an injector block linked to a die or a multi-manifold die. As multilayered film structures increase in complexity it becomes more difficult to control the individual layer thickness …

    birmingham Download PDF for Use of computational fluid dynamics to improve the layer thickness control of polyester based multilayered films (opens in a new tab)

  7. Effect of build angle and print layer thickness on clinical accuracy of 3D-Printed orthodontic models

    This study investigated how variations in print layer thickness and build angle impact the accuracy of orthodontic models produced using a digital light processing (DLP) 3D printer. Orthodontic models were generated from a digital master model derived from an ideal maxillary typodont scan. The …

    umkc Repository record for Effect of build angle and print layer thickness on clinical accuracy of 3D-Printed orthodontic models (opens in a new tab)

  8. Analysis of microtopography, vegetation, and active-layer thickness using terrestrial LIDAR and kite photography, Barrow, AK

    … This study examined changes in the active layer of permafrost near Barrow, Alaska at very fine scale to capture subtle changes related to microtopography and landcover. In 2010, terrestrial LIDAR was used to collect high-resolution elevation data for four 10 m × 10 m plots where maximum …

    montana Repository record for Analysis of microtopography, vegetation, and active-layer thickness using terrestrial LIDAR and kite photography, Barrow, AK (opens in a new tab)

  9. Analysis of microtopography, vegetation, and active-layer thickness using terrestrial LIDAR and kite photography, Barrow, AK

    … This study examined changes in the active layer of permafrost near Barrow, Alaska at very fine scale to capture subtle changes related to microtopography and landcover. In 2010, terrestrial LIDAR was used to collect high-resolution elevation data for four 10 m × 10 m plots where maximum …

    montana-tech Repository record for Analysis of microtopography, vegetation, and active-layer thickness using terrestrial LIDAR and kite photography, Barrow, AK (opens in a new tab)

  10. Tomographic PIV Investigation of the Cantilevered Circular Cylinder Wake with Varying Aspect Ratio and Boundary Layer Thickness

    … aspect ratios (H/D) of 3 < H/D < 7 and boundary layer thickness to diameter (delta/D) ratios, 0.98 < delta/D < 1.25 using Tomographic Particle Image Velocimetry. The Reynolds number based on cylinder diameter is held fixed at Re = 750. The primary focus of the study is to characterize the main …

    calgary Repository record for Tomographic PIV Investigation of the Cantilevered Circular Cylinder Wake with Varying Aspect Ratio and Boundary Layer Thickness (opens in a new tab)

  11. Nondestructive inspection and quantification of carbon fiber laminates for barely visible impact damage and adhesive layer thickness measurements.

    … without compromising structural integrity. The layered structure of carbon fiber laminates constitutes the need for new testing procedures to quantify quality and inspect for defects, for both manufacturing and in-service. This research uses a novel high resolution ultrasonic non-destructive …

    baylor Repository record for Nondestructive inspection and quantification of carbon fiber laminates for barely visible impact damage and adhesive layer thickness measurements. (opens in a new tab)

  12. Lattice Relaxation by Plastic Flow and Study of Apparent Critical Layer Thickness in II-VI/GaAs(001) Heterostructures

    … It is applicable to graded and multilayered structures, allows for changes of temperature or growth rate, and accounts for differential thermal expansion. For the implementation of this model we consider an arbitrary structure divided into a number of sublayers, each of which is …

    uconn-diss Repository record for Lattice Relaxation by Plastic Flow and Study of Apparent Critical Layer Thickness in II-VI/GaAs(001) Heterostructures (opens in a new tab)

  13. Effect of Heat Treatments and Reduced Absorber Layer Thickness on Cu(In,Ga)Se2 Thin Film Solar Cells

    … Gallium Diselenide (Cu(In,Ga)Se2) absorber layers is one of the most promising candidates to emerge as an efficient solar cell technology in the near future. CIGS cells with efficiencies of 19.2 % have already been reported [1]. In this study, CIGS absorber layers are fabricated by a …

    usf Repository record for Effect of Heat Treatments and Reduced Absorber Layer Thickness on Cu(In,Ga)Se2 Thin Film Solar Cells (opens in a new tab)

  14. The importance of elemental stacking order and layer thickness in controlling the formation kinetics of copper indium diselenide

    … Copper-selenium and indium-selenium binary layered samples were investigated to identify interfacial reactions that would form undesired binary intermediate compounds resulting in the need for high temperature annealing. Although the indium-selenium system did not form interfacial compounds …

    oregon Repository record for The importance of elemental stacking order and layer thickness in controlling the formation kinetics of copper indium diselenide (opens in a new tab)

  15. Improving Build Rate of Low Alloy Steels Produced by Laser Powder Bed Fusion: Influence of layer thickness on processability

    … the build rate of these alloys by varying the layer thickness. Specimens were produced at layer thicknesses of 40 μm and 60 μm, across surface energy densities (SED) of 2.4 to 3.8 J/mm2. From this investigation, a 40 μm layer thickness yielded a wider processing window in comparison to a 60 μm …

    chalmers Repository record for Improving Build Rate of Low Alloy Steels Produced by Laser Powder Bed Fusion: Influence of layer thickness on processability (opens in a new tab)

  16. On linking the filter width to the boundary layer thickness in explicitly filtered large eddy simulations of wall bounded flows

    Computational fluid dynamics (CFD)-based three-dimensional predictive fire models are increasingly used for predicting fire growth and spread. The models provide information to fire safety engineers for designing fire protection systems in buildings. Although currently limited, in a generation …

    vu-aus Download PDF for On linking the filter width to the boundary layer thickness in explicitly filtered large eddy simulations of wall bounded flows (opens in a new tab)

Page 1 of 80