Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Lean Blow Out"”.
-
Fuel Flexibility, Gas Turbine Combustion, Laser Diagnostics, Lean Blow-Out
… limits in a model gas turbine combustor. The lean operability limit is evaluated by taking lean blow-out measurements at varying fuel compositions to investigate overall impact of ammonia additions. Results show that ammonia blending is limited to ~50% ammonia by mole, with a large increase of …
-
Flow Field Measurements in a Counter-Swirl Stabilized Liquid Combustor
… gas turbine engines often operate in the fuel lean regime. While operating near the lean blow out (LBO) limit does reduce some harmful emissions, combustor stability is sacrificed and extinction becomes a major concern. To fully understand the characteristics of lean operation, an experimental …
-
Reduced Mechanism Validation and Analysis Near Extinction Limits of Perfectly Stirred Reactors
… particular, extinction at conditions relevant to lean blow out (LBO) in jet engines is investigated. It was found that the reduced models perform well over various equivalence ratios, pressures, and temperatures and can accurately capture extinction in PSR. The four jet fuels exhibited similar …
-
Design and Analysis of a Toroidal Jet-Stirred Reactor for Ammonia-Hydrogen Jet Engine Development
… to determine mass flow rates, expected emissions output, and expected lean blow out. Based on these results, material studies were conducted to determine the best materials for each of the TJSR's components. Thermomechanical were conducted to determine the expected temperature distribution and …
-
Development of optical diagnostics of plasma-related phenomena and applications
… With the help of 0.1% additional energy, the lean blow-out limit of a hundred kilowatt burner was extended from a global equivalence ratio of 0.47 to 0.45.
-
Real-Time Prediction of Lean Blowout using Chemical Reactor Network
The lean blow-out (LBO) of gas turbine combustors is a concern that can limit the rate of descent for an aircraft, the maneuverability of military jets, and cause a costly and time-intensive reignition of land-based gas turbines. This work explores the feasibility of a model-based combustor …
-
Numerical and experimental investigation of a gasturbine model combustor with axial swirler
… axial swirler and placed in a laboratory for the lean premixed turbulent combustion of a range of fuels at atmospheric pressure. The operation with natural gas, methane, hydrogen-enriched methane and syngas from black-liquor gasification was investigated experimentally and numerically. The CECOST …
-
Spray Combustion Characteristics and Emissions of a Wood derived Fast Pyrolysis Liquid-ethanol Blend in a Pilot Stabilized Swirl Burner
… in order to stabilize ignition, promote the burnout of bio-oil and decrease CO, hydrocarbon and particulate matter emissions. The total amount of primary air and atomizing air that can be used to improve turbulence, mixing, droplet burnout and overall combustion quality is limited by the …
-
Dynamics of Lean Direct Injection Combustors
… temperatures, and thus more NOx production. Lean Direct Injection (LDI) is a combustion scheme that was proposed by NASA, and inherently addresses the needs of both the private sector and the military. LDI is a liquid fueled combustor that promotes rapid mixing of fuel and air at the entrance …
-
Preferential Vaporization Potential of Crude Oils and its Impact on Flame Flashback Behaviors
… control near-limit combustion behaviors, such lean blow-out and flashback. In addition, the ignition propensity of these heavy fuels is not reported in crude assays, and utilizing a simple, with small sample, and quick methodology to characterize the ignition propensity is important in …
-
Modelling of methane and hydrogen enriched methane flames in industrial gas turbine burners
… firing temperature. To reduce the NOx emissions lean premixed combustion is used in most modern industrial gas turbines. The gas turbine is operated close to the lean blow out limit, sometimes with stability issues as a result. To keep the NOx and CO emissions to a minimum and at the same time …
-
Autoignition study of next generation aviation fuels and components
… hydrocarbon species, and their blends that are out of jet fuel standards and not comprehensively evaluated in combustion behavior are categorized as C fuels. Category C fuels are tested at similar test conditions. C-1, also known as Gevo ATJ (Alcohol to Jet fuels), is comprised of two heavily …