Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Lexan"”.

  1. Charge injection threshold in Lexan and Acrylite

    Bulk breakdown in dielectrics occurs when the applied electric field exceeds a critical field and the insulating dielectric becomes conducting. This breakdown event damages the dielectric by producing a permanent channel of fractal dimension inside the dielectric. The resulting conducting structure …

    ttu Repository record for Charge injection threshold in Lexan and Acrylite (opens in a new tab)

  2. The surface resistivity and charging of lexan

    The surface resistivity of the polymer insulator Lexan™ (polycarbonate) in a vacuum environment has been investigated both experimentally and theoretically. The term surface resistivity is often used to describe the electrical properties of insulators at low fields; however, the standard method of …

    ttu Repository record for The surface resistivity and charging of lexan (opens in a new tab)

  3. Sparkplug coating enhancement of the flashover potential of lexan

    … was observed to occur in the organic polymer Lexan after it was exposed to the byproducts of a vacuum sparkplug discharge. Previous analysis of the treated surfaces using Electron Spectroscopy for Chemical Analysis (ESCA) showed the insulator to be coated with a thin hydrocarbon/metal oxide …

    ttu Repository record for Sparkplug coating enhancement of the flashover potential of lexan (opens in a new tab)

  4. Secondary electron emission coefficient from lexan: the low energy crossover

    … electron emission curve of the polymer insulator Lexan (polycarbonate) has been experimentally investigated. The secondary electron emission coefficient (SEEC) is the ratio of the number of secondary electrons leaving the surface to the number of incident primaries. At high and low energies the …

    ttu Repository record for Secondary electron emission coefficient from lexan: the low energy crossover (opens in a new tab)

  5. Reduction of the surface electric potential on Lexan and Teflon

    … experiment with a small error for the polymers. Lexan and Teflon virgin samples were treated with heat, humidity and vacuum. The best results were obtained using room temperature and 50-60% humidity and resulted in zero surface potential.

    ttu Repository record for Reduction of the surface electric potential on Lexan and Teflon (opens in a new tab)

  6. The effects of the insulator surface roughness on the surface flashover voltage of lucite, lexan, and celcon

    … different surface roughness groups. Lucite, Lexan, and Celcon samples were prepared with ten different surface roughness groups ranging from treatment with #80 grit sandpaper to 0.05 ]am alumina polish. For each material, ten identically prepared samples were tested for each roughness group. …

    ttu Repository record for The effects of the insulator surface roughness on the surface flashover voltage of lucite, lexan, and celcon (opens in a new tab)

  7. Secondary electron emission from dielectrics

    … of dielectrics. Data were taken on samples of Lexan, Lucite, treated Lexan, and treated Lucite. Two sets of data were taken for each sample. The samples were chosen based on previous experiments conducted in the surface flashover laboratory that indicated interesting properties of the treated …

    ttu Repository record for Secondary electron emission from dielectrics (opens in a new tab)

  8. Συμβολή της ηλεκτρονικής μικροσκοπίας σαρώσεως στη μελέτη ελαστοπλαστικών φαινομένων κατά τη θραύση των υλικών

    … that the examinated materials (copper and Lexan) exhibited very different behavior as far as the above mentioned phenomena are concerned. In the case of Lexan an intense formation of a (oblongs) damaged ligament ahead of the crack-tip is observed. This ligament is of a Dugdale general type …

    greece Repository record for Συμβολή της ηλεκτρονικής μικροσκοπίας σαρώσεως στη μελέτη ελαστοπλαστικών φαινομένων κατά τη θραύση των υλικών (opens in a new tab)

  9. Technologie výroby plastového stínítka lampičky

    … stínítka lampičky z polykarbonátu značeného Lexan 925 do vstřikovací formy horkou vtokovou soustavou. Nejprve je předloţena literární studie zaměřená na plasty a technologii vstřikování do forem. Následuje řešení problému výroby stínítka lampičky. Navrţená forma je dvojnásobná, dvou-desková, …

    brno-tech Repository record for Technologie výroby plastového stínítka lampičky (opens in a new tab)

  10. Pulsed flashover of solid dielectrics in vacuum and gases

    … pulsed arc in vacuum. Solid cylinders of Lucite, Lexan, Delrin and Blue Nylon with a height of one centimeter and a diameter of 6.35 centimeters were placed between brass electrodes in a vacuum chamber. Measurements of the flashover potential of each material were made in vacuum (1 X 10 Torr), in …

    ttu Repository record for Pulsed flashover of solid dielectrics in vacuum and gases (opens in a new tab)

  11. Surface breakdown on insulators at cryogenic temperatures

    … is examined, in detail, experimentally for Lexan, a polymer, and Alumina, AI2O3, a ceramic. Phase I shows a current amplitude for the lower temperature that is 4 to 5 times as high as that of room temperature for both Lexan and Alumina. Also there is a tendency for the cooler samples to have …

    ttu Repository record for Surface breakdown on insulators at cryogenic temperatures (opens in a new tab)

  12. Insulator flashover at cryogenic temperatures

    … to flashover initiation at room temperature for Lexan samples.

    ttu Repository record for Insulator flashover at cryogenic temperatures (opens in a new tab)

  13. Návrh technologie výroby plastového držáku uhlíků

    … dílce držáku uhlíků z polykarbonátu s označením Lexan 945A do vstřikovací formy s horkou vtokovou soustavou. Nejprve je zde předložena obecná literární studie týkající se plastů a technologie vstřikování obecně. Dále pokračuje studie vstřikovacích forem s horkými vtokovými soustavami a analýza …

    brno-tech Repository record for Návrh technologie výroby plastového držáku uhlíků (opens in a new tab)

  14. Optimization of electrochemical etching parameters for alpha particle registration in polymers and application to radon monitoring

    … track development in various polymers like Lexan, cellulose acetate and cellulose acetobutyrate. The 360 um thick cellulose acetobutyrate has been found to be the best of these polymers. The electrochemical etching parameters have been optimized to obtain maximum registration efficiency …

    ut-knoxville Repository record for Optimization of electrochemical etching parameters for alpha particle registration in polymers and application to radon monitoring (opens in a new tab)

  15. Radio frequency propagation differences through various transmissive materials.

    … panels manufactured by Enduro Composite Systems, Lexan® XL-1 polycarbonate plastic manufactured by GE Corporation and Styrofoam™ polystyrene board manufactured by The Dow Chemical Company. Testing was conducted in a double electrically isolated copper mesh screen room at the University of North …

    unt Repository record for Radio frequency propagation differences through various transmissive materials. (opens in a new tab)

  16. A sorption and dilation investigation of amorphous glassy polymers and physical aging

    … chain flexibility: Matrimid® , Ultem® and Lexan® (Tg = 313, 215 and 150°C respectively). Since the lattice fluid equation of state is intend for use on equilibrium media, only partial descriptions of solubility are expected. A variation of the Sanchez-Lacombe equation of state which takes …

    texas Repository record for A sorption and dilation investigation of amorphous glassy polymers and physical aging (opens in a new tab)

  17. The effect of magnetic field on coated insualtors

    … effect on a treated sample. A cylindrical Lexan sample and brass plate-plate electrodes are used in this study. Small, cubic, lightweight permanent magnets which can produce up to 0.38 T magnetic fleld at their surface are arranged in proper configuration to create a magnetic field along …

    ttu Repository record for The effect of magnetic field on coated insualtors (opens in a new tab)

  18. Stress and deformation build-up in bonded composite patch repair

    … an elastic substrate. The relaxation modulus of Lexan specimens are characterized, first as monolithic beams and then bonded to an elastic substrate. Results show that the relaxation modulus of Lexan can be determined from bimaterial beam relaxation tests. The temperature and cure dependant …

    ubc Repository record for Stress and deformation build-up in bonded composite patch repair (opens in a new tab) Download PDF for Stress and deformation build-up in bonded composite patch repair (opens in a new tab)

  19. Ion vapor deposition

    … onto a DC bias. Silver films were applied to Lexan substrates under different operating conditions. The films were studied using an optical microscope and the adhesion of the films were tested using peel tests. The results of the peel tests showed that the some of the applied film was still …

    ttu Repository record for Ion vapor deposition (opens in a new tab)

Page 1 of 3