Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"Li-Air"”.
-
Nanostructured composites as electrochemical catalysts for Li-air batteries
… electronics and electric vehicle (EV) applications continues to increase. Although lithium (Li) ion batteries are currently used for various applications, including EVs, these batteries are still unable to fulfill the ultimate driving range requirements. Li-air batteries are an attractive …
-
Nanoscale metal oxide and supported metal catalysts for Li-air battery
… catalysts and supports for rechargeable Li-air batteries that use aqueous catholytes. Transition metal oxides, TiO2 and Nb2O5 in particular, were prepared from a sol-gel process in the form of nanocoatings (5~50 nm) on carbon nanotubes (CNTs) and studied as catalyst supports. Carbon …
-
High-performance hybrid lithium-air batteries : from battery design to catalysts
… extensive interest in electrical energy storage. Li-air batteries are appealing in this regard as they offer much higher energy density than the current Li-ion batteries, but the nonaqueous Li-air batteries suffer from poor cycle life arising from electrolyte decomposition and clogging of the air …
-
LITHIUM-AIR BATTERY CATHODES: A STUDY ON THE EFFECTS OF FABRICATION METHOD AND ACTIVE MATERIAL PROPERTIES ON BATTERY PEFORMANCE
Lithium Air (Li-Air) batteries have received scientific interest due to their high gravimetric energy density, which is the largest of the well known battery systems; however, the reactive chemistry of these batteries, which is the source of their high energy density, is very taxing on the battery …
-
INVESTIGATION OF CARBON FIBER AND FREE-STANDING CARBON NANOTUBE ARRAY ELECTRODES FOR LITHIUM-AIR BATTERIES
Conventional Lithium-ion battery technology is beginning to approach its practical energy density limit. As the demand for high capacity electrical energy storage increases, the need for a viable replacement to Li-ion batteries is becoming essential. Lithium-oxygen and lithium-air batteries boast a …
-
Gas diffusion electrodes and operating conditions for electrochemical energy storage applications
… world today faces two contradictory challenges: climate change and energy security. Interestingly, both challenges can be potentially addressed by targeting atmospheric CO2. The global demand for energy has increased due to population growth and most of this demand is met by the dwindling resource …
-
NASICON-STRUCTURED SOLID LI-IONIC CONDUCTOR FOR NEXT WAVE OF ENERGY STORAGE DEVICES
NASICON-structured Li1.5Al0.5Ge1.5(PO4)3 (LAGP) is successfully prepared by different synthesis methods such as melting quench, sol-gel and hot press sintering. The influence of crystallization parameters in melting quench method have been systematically investigated and a phase transformation …
-
Exploring Electrode Microstructural Impact on Lithium-Air Battery Performance
… large efficiency (much higher than Carnot limit of heat – to – work conversion) and sufficiently good reversibility. These electrochemical storage devices have to match the present day fuel economy of gasoline engines for them to present an affordable and realistic solution. Lithium air …
-
Synthesis And In-Situ Charactorization Of Energy Storage Material
… electrochemical energy storage devices, such as Li-ion batteries, Li-air batteries and supercapacitors, due to its high conductivity, high surface area, mechanical and electrochemical stability. However, the fact that graphene (and other carbon based materials) can only store charges on exposed …
-
Oxygen Reduction Reaction in Ionic Liquids for Applications in Fuel Cells and Lithium-Air Batteries
… proton exchange membrane fuel cells (PEMFCs) and lithium-air batteries. These energy conversion and storage devices are promising due to their high energy density, high conversion efficiency and low environmental impact. In PEMFC, the proton exchange membrane has to be humidified which limits the …
-
NASICON-CERAMIC:POLYMER ELECTROLYTE COMPOSITE MEMBRANES FOR AQUEOUS LITHIUM-AIR BATTERIES
… EXTREMELY HIGH SPECIFIC ENERGY, RECHARGEABLE LI-AIR BATTERIES (LABS) COULD MEET THE DEMAND FOR LARGE-SCALE STORAGE SYSTEMS TO INTEGRATE RENEWABLE SOURCES INTO THE POWER GRID. LABS WITH AQUEOUS CATHOLYTES HAVE A HIGHER POTENTIAL TO REACH THEIR SLIGHTLY LOWER THEORETICAL LIMITS IN PRACTICAL …
-
NANOSTRUCTURED METAL OXIDE-BASED MATERIALS AND THEIR APPLICATION IN BATTERIES
… ON THE DEVELOPMENT OF THE ANODE MATERIAL FOR THE LI-ION BATTERY AND THE NOVEL BIFUNCTIONAL CATALYST FOR THE METAL-AIR BATTERY. FIRSTLY, MESOPOROUS SPHERICAL LI4TI5O12/C WAS SUCCESSFULLY FABRICATED VIA POROUS SPHERICAL TIO2 AS TITANIUM SOURCE, LITHIUM ACETATE AS LITHIUM SOURCE AND …
-
STUDY OF REDOX FLOW LITHIUM-OXYGEN BATTERY FOR LARGE-SCALE ENERGY STORAGE
Lithium oxygen battery, as a promising next generation energy storage system, has attracted tremendous attention. However, for aprotic systems surface passivation and pore clogging of the cathode occur due to the formation of insulating Li2O2. Although people have tried to use homogeneous catalysts …
-
Nanostructured phenol-formaldehyde based carbons as electrodes for lithium/oxygen batteries
… of these new energy strategies. The Lithium/air (Li/air) rechargeable battery represents by far one of the most competitive energy storage devices to date. High energy densities which are about 5 - 10 times that of Lithium-ion (Li-ion) batteries are achievable with these devices. …
-
Modeling of hierarchical cathode for lithium air batteries with aqueous electrolyte
Lithium air batteries show a great promise as energy storage devices due to their high energy densities. Meanwhile, the exploiting of renewable energy sources stimulates the development of the batteries. However, currently, there are numerous scientific and technical challenges that must be …
-
Construction and Regeneration of Solid-State Lithium Batteries by Rapid Joule Heating
Solid-state batteries, with their superior safety and energy density, are promising candidates to replace current lithium-ion batteries with organic liquid electrolytes. Polymer- and oxide-based solid electrolytes are particularly attractive for their low cost in fabrication and stability in air …
-
Two-dimensional Nanomaterials for Renewable Energy Generation and Sensing Applications
… non-local hot carrier transport, and Klein tunneling. Building on such fundamental phenomena, my work focuses on biomolecular sensing, energy generation, and storage using 2D materials such as graphene, graphene oxide, boron nitride, and 2D titanium carbide. Chapter 1 provides an introduction to …
-
Multifunctioning Electrocatalytic Cathodes for Lithium-Air and Lithium-Oxygen Batteries
Despite its historical success, currently, the limited energy density in Li-ion batteries restricts the electrifying of transportation into small and medium-scale vehicles. On the contrary, Li- O2 batteries (LOBs) and Li-air batteries (LABs) with larger theoretical energy density are capable of …
-
ELECTROSPINNING AND AIR-CONTROLLED ELECTROSPRAYING OF POLYMER/PRECURSOR SOLUTIONS TO PRODUCE NANOMATERIALS FOR ENERGY STORAGE APPLICATIONS
… energy storage is increasingly used in applications ranging from portable electronics to electric vehicles to grid-sized storage installations and the next generation of energy storage requires increased capacity, performance, and safety. To meet these demands, energy storage will rely more …
Page 1 of 2