Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 70 for “"LiTFSI"”.

  1. EMITFSI - an ionic liquid electrolyte for lithium batteries

    … and lithium ion transport.</p> <p>Addition of LiTFSI to EMITFSI resulted in a decrease in the conductivity (e.g. from 10.5 to 5.6 mS cm<sup>-1</sup> for 0.47 mol dm<sup>-3</sup>) and the lithium ion diffusion coefficient was found to be 1.2 x 10<sup>-7</sup> cm<sup>2</sup> s<sup>-1</sup> for …

    soton Download PDF for EMITFSI - an ionic liquid electrolyte for lithium batteries (opens in a new tab)

  2. Super p-sulfur cathodes for quasi-solid-state lithium-sulfur-batteries.

    … Lithium bis(trifluoromethyl sulfonyl)imide (LiTFSI) as salt, with premixed pyrrolidinium bis(trifluoromethyl sulfonyl)imide (PYR) as solvent and 1,3-dioxolane (DOL) as diluent were used to wet both SSE-electrode interfaces. The effect of IL dilution, co-solvent amount, LiTFSI concentration, C …

    louisville Repository record for Super p-sulfur cathodes for quasi-solid-state lithium-sulfur-batteries. (opens in a new tab)

  3. An Analysis of the Effect of Absorbent Membranes on Electrochemical Stability in Aqueous Li-ion Cells

    … study from Science observed highly concentrated LiTFSI salt in water increased the stability window drastically, up to ~3.0V. One of the reasons this worked so well is because this salt is highly soluble in water. Using the principles of water affinity, in this study, we hypothesize that highly …

    cornell Repository record for An Analysis of the Effect of Absorbent Membranes on Electrochemical Stability in Aqueous Li-ion Cells (opens in a new tab)

  4. Polymethacrylate and Polyacrylate based Polymer and Nanocomposite Electrolytes for Lithium Metal Batteries

    … obtained from these bottlebrushes mixed with LiTFSI conducting salt were examined and the results were compared to the respective linear polymer systems. The occurring processes in the cell were identified by the Distribution of Relaxation Times (DRT) or extended DRT (eDRT) method. It could be …

    bayreuth Repository record for Polymethacrylate and Polyacrylate based Polymer and Nanocomposite Electrolytes for Lithium Metal Batteries (opens in a new tab)

  5. High throughput studies of polymer electrolyte for battery and fuel cell applications

    … specifically to a ternary system of PVdF-HFP, LiTFSI and PC.<br/>By preparing a vast array of samples across the composition range, it was found that the<br/>conductivity reached a maximum value when the weight fraction composition was<br/>0.45/0.45/0.1 of PVdF-HFP/LiTFSI/PC with completely …

    soton Download PDF for High throughput studies of polymer electrolyte for battery and fuel cell applications (opens in a new tab)

  6. Solid-State and Diffusional Nuclear Magnetic Resonance Investigations of Oxidatively Stable Materials for Sodium Batteries

    … used to investigate the transport properties of LiTFSI in ADN as a function of LiTFSI concentration. By measuring the diffusion coefficient of Li+ and TFSI as a function of diffusion time (Δ), diffusional behaviour is encoded as a function of length scale to study the short- and long-range …

    mcmaster Repository record for Solid-State and Diffusional Nuclear Magnetic Resonance Investigations of Oxidatively Stable Materials for Sodium Batteries (opens in a new tab)

  7. Polymer and Nanocomposite Electrolytes for Lithium Metal Batteries based on Clickable Poly(glycidyl propargyl ether)

    … as a mechanically reinforcing element; and LiTFSI azide (LiTFSI-N₃), a single lithium-ion conducting (SLIC) salt with a covalently bond, highly charge-delocalized anion. Additionally, sequential co-grafting of all three named azides combines their properties into one material. All fabricated …

    bayreuth Repository record for Polymer and Nanocomposite Electrolytes for Lithium Metal Batteries based on Clickable Poly(glycidyl propargyl ether) (opens in a new tab)

  8. From molecules to interfaces: a multiscale study of conjugated polymers in lithium-sulphur battery cathodes

    … (1, 3-dioxolane) solvents with the lithium salt LiTFSI (lithium bis(trifluoromethanesulfonyl)imide). We examine how DME/DOL solvent molecules and LiTFSI ions organise and bind around PTBT, and how these interactions alter the polymer conformation and entanglement in various solvent mixtures and …

    freiburg-diss Repository record for From molecules to interfaces: a multiscale study of conjugated polymers in lithium-sulphur battery cathodes (opens in a new tab)

  9. Structure and Thermodynamics of Salt-Doped Polymer Blends

    … Chapter 2, we investigated the phase behavior of LiTFSI-doped poly(ethylene-alt-propylene)/poly(ethylene oxide) (PEP/PEO) and polystyrene/poly(ethylene oxide) (PS/PEO) binary blends and observed a significant reduction of miscibility and an asymmetric phase diagram. Chapter 3 details the symmetric …

    umn Repository record for Structure and Thermodynamics of Salt-Doped Polymer Blends (opens in a new tab)

  10. Silica-based solid electrolyte for Li-ion microbatteries

    … and TFA as catalyst in PYR13-FSI (IL) and LiTFSI (Li+ source). It was possible to synthesize transparent IG monoliths with gelation times of 2-3 h, which is a suitable time for the IG film preparation on the LCO cathodes. Four IGs with different compositions were prepared and characterized. …

    liege Repository record for Silica-based solid electrolyte for Li-ion microbatteries (opens in a new tab) Download PDF for Silica-based solid electrolyte for Li-ion microbatteries (opens in a new tab)

  11. Synthese und Charakterisierung neuer vernetzbarer Materialien für den Lochtransport in Perowskit-Solarzellen

    … it is often doped by the addition of LiTFSI and tBP. The use of LiTFSI is especially problematic, due to its extremely hygroscopic nature and the fact, that many Perovskites are prone to moisture-induced degradation. Using crosslinkable materials can contribute to increase the …

    bayreuth Repository record for Synthese und Charakterisierung neuer vernetzbarer Materialien für den Lochtransport in Perowskit-Solarzellen (opens in a new tab)

  12. Wide bandgap conjugated polymer donors based on alkyloxime substituted thiophene for organic solar cells

    … optimize TTOTCl-based OSC through incorporating LiTFSI as a hole transport enhancement layer. The OSCs with a thin LiTFSI layer achieved an excellent PCE of 15.96%, with an enhanced VOC of 0.72 V and FF of 0.71. Further investigations are needed to fully understand the effect and improve the film …

    waterloo Repository record for Wide bandgap conjugated polymer donors based on alkyloxime substituted thiophene for organic solar cells (opens in a new tab)

  13. Polymer Electrolytes for Rechargeable Lithium/Sulfur Batteries

    … 1 M lithium bistrifluoromethane-sulfonamide (LiTFSI) in tetraethylene glycol dimethyl ether (TEGDME) electrolyte in a poly(vinylidenefluoride-co-hexafluoropropylene) (PVDF-HFP) /poly(methylmethacrylate) (PMMA) polymer matrix. The electrochemical properties of the resulting GPE were …

    waterloo Repository record for Polymer Electrolytes for Rechargeable Lithium/Sulfur Batteries (opens in a new tab)

  14. Advanced research on Lithium-Sulfur battery : studies of lithium polysulfides.

    … groups and acetonitrile (ACN) complexed with LiTFSI. 1,1,2,2-Tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether (HFE) is chosen to decrease their viscosities. (ACN)2:LiTFSI attracts particular attention because of the particularly low Li2Sn solubility and. Its good electrochemical performance …

    waterloo Repository record for Advanced research on Lithium-Sulfur battery : studies of lithium polysulfides. (opens in a new tab)

  15. STUDY OF MIXED IONIC/ELECTRONIC CONDUCTORS (MIECS) BASED ON Π-CONJUGATED LIQUID CRYSTALS AND BLOCK COPOLYMERS

    … impedance spectroscopy (EIS) with LiTFSI and F4TCNQ as ionic and electronic dopant, respectively. Apart from experiments, molecular dynamic (MD) simulations were adopted to guide molecular design and material properties. Based on simulation results, a series of liquid crystals with …

    cornell Repository record for STUDY OF MIXED IONIC/ELECTRONIC CONDUCTORS (MIECS) BASED ON Π-CONJUGATED LIQUID CRYSTALS AND BLOCK COPOLYMERS (opens in a new tab)

  16. Nuclear Magnetic Resonance Studies of Electrode and Electrolyte Materials for Li-Ion Batteries

    … and motional properties of PS-PEO (16-16)/LiTFSI, a solid electrolyte material, through pulse field gradient NMR.</p>

    cuny-grad Repository record for Nuclear Magnetic Resonance Studies of Electrode and Electrolyte Materials for Li-Ion Batteries (opens in a new tab)

  17. Hybrid-Solid-State Electrolytes: Interface Strategy for Solid-State Lithium Metal Batteries

    … PEO-lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-succinonitrile (SN) effectively prevents LLTO reduction against Li0 while performing poorly in symmetric Li cells with a large Li nucleation overpotential. Next, in Chapters 5 and 6, the cathode interface in hybrid SS-LMBs between Ni-rich …

    ottawa-retro Repository record for Hybrid-Solid-State Electrolytes: Interface Strategy for Solid-State Lithium Metal Batteries (opens in a new tab)

  18. Synthesis of 5,6,11,12,17,18-hexaazatrinaphthylene Nanowires for Cathode Material in Lithium Battery

    … performance in the electrolyte consisting of LiTFSI dissolved in 1,3-dioxolane (DOL) and 1,2-dimethoxyethane (DME). During the charge-discharge process, two electrochemical reactions occur with the redox at 1.5 V and 2.5 V, displaying six electrons transfer. Electrochemical study shows that …

    nus Repository record for Synthesis of 5,6,11,12,17,18-hexaazatrinaphthylene Nanowires for Cathode Material in Lithium Battery (opens in a new tab) Download file for Synthesis of 5,6,11,12,17,18-hexaazatrinaphthylene Nanowires for Cathode Material in Lithium Battery (opens in a new tab)

  19. Ionic Liquid Assisted Composite Ceramic-Polymer Electrolyte for Lithium Metal Batteries

    … salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ceramic electrolyte Li1.5Al0.5Ge1.5P3O12 (LAGP) is mixed and dispersed inside the polymer to study and provide additional pathways for lithium ion conduction, which raises both ionic conductivity as well as Li+ transference number (tLi+) …

    waterloo Repository record for Ionic Liquid Assisted Composite Ceramic-Polymer Electrolyte for Lithium Metal Batteries (opens in a new tab)

  20. Piperidinium Based Ionic Liquid - Silica Nanoparticle Hybrid Electrolyte For Lithium Metal Batteries

    … silica nanoparticle hybrid electrolyte with 1M LiTFSI and PC for use in lithium metal batteries. This unique NOHMs electrolyte provides a solid-like physical barrier to dendritic growth due to the jamming phase transition while maintaining use of the piperidinium chemistry to achieve the same …

    cornell Repository record for Piperidinium Based Ionic Liquid - Silica Nanoparticle Hybrid Electrolyte For Lithium Metal Batteries (opens in a new tab)

Page 1 of 4