Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Lid-driven cavity flow"”.

  1. A Numerical Study of Compressible Lid Driven Cavity Flow with a Moving Boundary

    … patterns for compressible, laminar, and shear driven flow inside a rectangular cavity. The bottom of the cavity is free to move at a specified speed and the aspect ratio of the cavity is changed from 1.0 to 1.5. The vertical sides and the bottom of the cavity are assumed insulated. The cavity …

    uno Repository record for A Numerical Study of Compressible Lid Driven Cavity Flow with a Moving Boundary (opens in a new tab)

  2. TWO-DIMENSIONAL SIMULATION OF SOLIDIFICATION IN FLOW FIELD USING PHASE-FIELD MODEL|MULTISCALE METHOD IMPLEMENTATION

    … but also enable explicitly labeling the solid and liquid phases and the position of the interface. In the research of this dissertation, a phase-field model has been employed to simulate 2-D dendrite growth of pure nickel without a flow, and 2-D ice crystal growth in a high-Reynolds-number …

    uky-thes Repository record for TWO-DIMENSIONAL SIMULATION OF SOLIDIFICATION IN FLOW FIELD USING PHASE-FIELD MODEL|MULTISCALE METHOD IMPLEMENTATION (opens in a new tab)

  3. gNek: A GPU Accelerated Incompressible Navier Stokes Solver

    … cases including channel, shear, Kovasznay, and lid-driven cavity flow problems, which achieve the proven convergence results.

    rice Repository record for gNek: A GPU Accelerated Incompressible Navier Stokes Solver (opens in a new tab)

  4. Parallel direction splitting for 3D incompressible Navier-Stokes equations

    … techniques. The algorithm is validated on multiple test cases, both in two and three dimensions, respectively. The method is suitable for parallel implementation and tests show excellent performance on a distributed memory cluster of up to 1,000 processors. Scalability results …

    ubc Repository record for Parallel direction splitting for 3D incompressible Navier-Stokes equations (opens in a new tab) Download PDF for Parallel direction splitting for 3D incompressible Navier-Stokes equations (opens in a new tab)

  5. Orthogonal Collocation on Finite Element Method for Driven Cavity Flow

    … used as Electrical Energy Storage (EES), Redox Flow Batteries (RFB) is advantageous in high capacity and long lifespan. However, the study of dynamic control of RFB systems which requires fast and accurate solver for fluid dynamics is still controversial. One of the reason is that the …

    washington Repository record for Orthogonal Collocation on Finite Element Method for Driven Cavity Flow (opens in a new tab)

  6. A Numerical and Experimental Study of Lid Driven Square Cavity Flow for Laminar and Turbulent Cases

    … studies are performed on steady and unsteady lid-driven cavity flow for laminar flow regime. In the experiments, a PIV and an LDA were employed to measure the global and local velocities, respectively inside a cavity of AR 1.0. The velocity vector plots and streamline plots which represent …

    uno Repository record for A Numerical and Experimental Study of Lid Driven Square Cavity Flow for Laminar and Turbulent Cases (opens in a new tab)

  7. Solution of Heat Transfer and Fluid Flow problems using meshless Radial Basis Function method

    … numerical solutions for Heat Transfer and Fluid Flow problems has been dominated by Finite Element Method, Finite Difference Method, Finite Volume Method, and more recently the Boundary Element Method. These methods revolve around using a mesh or grid to solve problems. However, problems with …

    unlv Repository record for Solution of Heat Transfer and Fluid Flow problems using meshless Radial Basis Function method (opens in a new tab) Download PDF for Solution of Heat Transfer and Fluid Flow problems using meshless Radial Basis Function method (opens in a new tab)

  8. Fluid-structure interaction of channel driven cavity flow

    An experimental setup was developed for channel driven cavity flow in order to study the fluid-structure interaction and provide benchmark data for validation of numerical fluid-structure interaction models. The channel driven cavity flow is a modification from lid-driven cavity flow. To examine …

    nps Repository record for Fluid-structure interaction of channel driven cavity flow (opens in a new tab)

  9. Simulation of three-dimensional incompressible viscous flows by DQ-SIMPLE algorithm

    … application to simulate the 2D and 3D steady lid-driven cavity flows and the 2D unsteady lid-driven cavity flow. It was found that all of the three numerical approaches can generate very accurate numerical results by using a considerably small number of grid points, but Approach 1 is more …

    nus Repository record for Simulation of three-dimensional incompressible viscous flows by DQ-SIMPLE algorithm (opens in a new tab) Download file for Simulation of three-dimensional incompressible viscous flows by DQ-SIMPLE algorithm (opens in a new tab)

  10. Effect of turbulent transport models and grid spacing on pans calculations of a lid-driven cavity

    The three-dimensional lid-driven cavity flow is investigated at Reynolds Number(Re)=10,000 for a wide range of spanwise-aspect ratios of 3:1:1, 0.5:1:1, and 1:1:1 using the Partially Averaged Navier-Stokes(PANS) turbulence closure model. The PANS turbulence model is a variable resolution turbulence …

    tamu Repository record for Effect of turbulent transport models and grid spacing on pans calculations of a lid-driven cavity (opens in a new tab)

  11. Numerical Study of Flow and Heat Transfer in Rotating Microchannels

    Investigation of fluid flow and heat transfer in rotating microchannels is important for centrifugal microfluidics, which has emerged as an advanced technique in biomedical applications and chemical separations. The centrifugal force and the Coriolis force, arising as a consequence of the …

    tamu Repository record for Numerical Study of Flow and Heat Transfer in Rotating Microchannels (opens in a new tab)

  12. Smoothed Particle Hydrodynamics Simulations Of Model-scale Tsunami Waves

    … and used to model a wide variety of fluid flows. Also, it is particularly well suited to simulating flow problems that have large deformations or contain free surfaces. This thesis describes in detail the SPH method and its application to single phase models of flows. Fortran code has been …

    plymouth Repository record for Smoothed Particle Hydrodynamics Simulations Of Model-scale Tsunami Waves (opens in a new tab)

  13. Lattice Boltzmann Method For Multiphase Flows With High Density Ratios

    … and its application to single and multiphase flows. The LBM algorithm using Single Relaxation Time (SRT) and Multi Relaxation Time (MRT) models are studied. In particular, a new MRT multiphase model is developed, based upon the SRT multiphase model of Banari et al. (2014). A unified LBM …

    plymouth Repository record for Lattice Boltzmann Method For Multiphase Flows With High Density Ratios (opens in a new tab)

  14. A Physics-Informed Neural Networks Approach to Analyze Incompressible Fluid Flow Problems

    … differentiation (AD). Unlike purely data-driven models, PINNs do not require labeled simulation or experimental data. Despite their growing success across a range of applications, challenges remain in extending PINNs to three-dimensional (3D) and un-steady benchmark problems. This thesis …

    tamu Repository record for A Physics-Informed Neural Networks Approach to Analyze Incompressible Fluid Flow Problems (opens in a new tab)

  15. A Physics-Informed Neural Networks Approach to Analyze Incompressible Fluid Flow Problems

    … differentiation (AD). Unlike purely data-driven models, PINNs do not require labeled simulation or experimental data. Despite their growing success across a range of applications, challenges remain in extending PINNs to three-dimensional (3D) and un-steady benchmark problems. This thesis …

    tamu Repository record for A Physics-Informed Neural Networks Approach to Analyze Incompressible Fluid Flow Problems (opens in a new tab)

  16. Numerical simulation of liquid crystal hydrodynamics

    … that is intermediate between crystalline solid and amorphous liquid. They are anisotropic viscoelastic materials with broad applications in science and engineering. For example, they have been traditionally used in flat panel displays and more recently, in energy conversion applications. …

    ubc Repository record for Numerical simulation of liquid crystal hydrodynamics (opens in a new tab) Download PDF for Numerical simulation of liquid crystal hydrodynamics (opens in a new tab)

  17. An assessment of lattice Boltzmann method for swallowing simulations

    … uses a kinetic-based approach to simulate fluid flows. The fixed grid nature and simplicity of lattice Boltzmann algorithm makes it an appealing approach for preliminary swallowing simulations. However, the issues of compressibility effect and boundary/initial condition implementation can be the …

    ubc Repository record for An assessment of lattice Boltzmann method for swallowing simulations (opens in a new tab) Download PDF for An assessment of lattice Boltzmann method for swallowing simulations (opens in a new tab)

  18. Residual-Based Isotropic and Anisotropic Mesh Adaptation for Computational Fluid Dynamics

    The accuracy of a fluid flow simulation depends not only on the numerical method used for discretizing the governing equations, but also on the distribution and topology of the mesh elements. Mesh adaptation is a technique for automatically modifying the mesh in order to improve the simulation …

    waterloo Repository record for Residual-Based Isotropic and Anisotropic Mesh Adaptation for Computational Fluid Dynamics (opens in a new tab)

  19. Computer aided design of extrusion forming tools for complex geometry profiles

    … for a specific extrusion die before a balanced flow distribution is obtained. This experimental based trial-and-error procedure is time and money consuming, but, it works, and most of the profile extrusion companies rely on such method. However, the competition is forcing the industry to look …

    minho-thes Repository record for Computer aided design of extrusion forming tools for complex geometry profiles (opens in a new tab)

Page 1 of 2