Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 70 for “"Light Extraction"”.

  1. LIGHT EXTRACTION IMPROVEMENT (FROSTING) OF GaAsP LED

    … at Agilent. Frosting is used to increase the light output (LOP) in the LEDs with no change in the materials used. It involved the roughening of the surface to enable more light to be emitted and not totally internally reflected. A simulation is performed to verify the optimal shape of the …

    nus Repository record for LIGHT EXTRACTION IMPROVEMENT (FROSTING) OF GaAsP LED (opens in a new tab) Download file for LIGHT EXTRACTION IMPROVEMENT (FROSTING) OF GaAsP LED (opens in a new tab)

  2. OLEDs: Improved light extraction through patterned plastics

    Light extraction from planar bottom-emitting OLEDs is approximately 20% due to light being waveguided in the substrate and organic layers as well as due to plasmon losses. As the consumer market for OLED lighting continues to grow, high-throughput fabrication of OLEDs that utilize novel light …

    iastate Repository record for OLEDs: Improved light extraction through patterned plastics (opens in a new tab)

  3. OLEDs: Light extraction and deep blue emission

    … their unique and attractive properties, such as lightweight, high brightness with strong color contrast, thin and flexible designs as well as potentially of low cost. OLEDs for lighting applications are under extensive research and development. Though promising for solid-state lighting, there are …

    iastate Repository record for OLEDs: Light extraction and deep blue emission (opens in a new tab)

  4. Light Extraction Efficiency of Nanostructured III-Nitride Light-Emitting Diodes

    … progress has been reported for III-nitride light-emitting diodes (LEDs), further enhancement in the external quantum effciency (η_EQE), which depends upon internal quantum efficiency, injection efficiency and light extraction efficiency (η_extraction), is essential in realizing next …

    rit Repository record for Light Extraction Efficiency of Nanostructured III-Nitride Light-Emitting Diodes (opens in a new tab)

  5. Increasing the light extraction efficiency of monochrome organic light-emitting diodes

    Organische, lichtemittierende Dioden (OLEDs) bezeichnen neuartige Lichtquellen, welche zur Beleuchtung oder für Displayanwendungen nutzbar sind. Im Allgemeinen ist die Lichtausbeute durch den hohen Brechungsindex und die Dünnschichtgeometrie der OLED begrenzt. Der hohe Brechungsindex sorgt dafür, …

    qucosa-diss

  6. OPTIMIZATION OF LIGHT EXTRACTION FROM HIGH-VOLTAGE SIC PIN DIODE VIA PACKAGE DESIGN

    This work demonstrates improved light extraction from a silicon carbide (SiC) PiN diode via package optimization. Previous research has shown that SiC power devices have low on-state voltage drop while maintaining a large breakdown voltage, making them desirable for high-power systems. SiC produces …

    nps Repository record for OPTIMIZATION OF LIGHT EXTRACTION FROM HIGH-VOLTAGE SIC PIN DIODE VIA PACKAGE DESIGN (opens in a new tab)

  7. Twisted Moire Photonic Crystals: Their Nano-Fabrications, Optical Properties, and Applications in Light Extraction

    … of moire photonic crystals in improving light extraction efficiency are simulated and verified in light emitting devices. Furthermore, I simulated the light extraction efficiency in OLED when the Al layer is patterned with a triangular GPSC, square moiré PhC with defects in the uniform …

    unt Repository record for Twisted Moire Photonic Crystals: Their Nano-Fabrications, Optical Properties, and Applications in Light Extraction (opens in a new tab)

  8. Enhanced Light Extraction Efficiency from GaN Light Emitting Diodes Using Photonic Crystal Grating Structures

    Gallium nitride (GaN) light emitting diodes (LED) embody a large field of research that aims to replace inefficient, conventional light sources with LEDs that have lower power, higher luminosity, and longer lifetime. This thesis presents an international collaboration effort between the State Key …

    calpoly Repository record for Enhanced Light Extraction Efficiency from GaN Light Emitting Diodes Using Photonic Crystal Grating Structures (opens in a new tab)

  9. Light Extraction Enhancement of GaN Based LEDs Using Top Gratings, Patterned Sapphire Substrates, and Reflective Surfaces

    … developing high efficiency Gallium Nitride based light emitting diodes (LED). These devices have become increasingly popular in LED displays and solid state lighting. Due to the large difference in refractive index between GaN and Air, a significant amount of light reflects at the boundary and …

    calpoly Repository record for Light Extraction Enhancement of GaN Based LEDs Using Top Gratings, Patterned Sapphire Substrates, and Reflective Surfaces (opens in a new tab)

  10. Simulation,Design and Fabrication of Nanotextured Surfaces for Optoelectronic Devices

    … being investigated as a method of improving the light extraction efficiency of optoelectronic devices by modifying the optical and electrical properties of materials. Nanotexturing of materials, when exploited in the production of light emitting diodes (LEDs), presents the opportunity to increase …

    ttu Repository record for Simulation,Design and Fabrication of Nanotextured Surfaces for Optoelectronic Devices (opens in a new tab)

  11. iii-nitride ultraviolet light-emitting diodes: approaches for the enhanced efficiency

    III-nitride ultraviolet (UV) light-emitting diodes (LEDs) offer marvelous potential for a wide range of applications, including air/water purification, surface disinfection, biochemical sensing, cancer cell elimination, and many more. III-nitride semiconductor alloys, especially AlGaN and AlInN, …

    njit Repository record for iii-nitride ultraviolet light-emitting diodes: approaches for the enhanced efficiency (opens in a new tab)

  12. Experimental investigations on growth of GaN-based materials for light emitting applications

    … and application of GaN-based layers in light emitting structures. All the thin films and light emitting diodes (LEDs) discussed in this thesis were grown by metal organic vapor phase epitaxy (MOVPE). The objective of this thesis was to improve the material quality and light extraction of …

    aalto Repository record for Experimental investigations on growth of GaN-based materials for light emitting applications (opens in a new tab)

  13. ENHANCING WALL-PLUG EFFICIENCY THROUGH IMPROVED TRANSPORT IN WIDE-GAP NITRIDE EMITTERS

    … UV, fulfilling numerous applications in general lighting, display technology, and sensing. However, emerging applications including water disinfection and visible light communications demand higher efficiencies than are currently achievable in III-Nitride LEDs and laser diodes. Losses in such …

    cornell Repository record for ENHANCING WALL-PLUG EFFICIENCY THROUGH IMPROVED TRANSPORT IN WIDE-GAP NITRIDE EMITTERS (opens in a new tab)

  14. IMPROVING THERMAL PERFORMANCE OF DIRECT BAND GAP POWER DEVICES THROUGH OPTICAL EMISSION EXTRACTION

    … this work investigates device cooling via extraction of internal light emission due to radiative carrier recombination, thereby removing this optical energy before it becomes heat. With reduced operating temperatures, devices can be built smaller and will have increased reliability. Results …

    nps Repository record for IMPROVING THERMAL PERFORMANCE OF DIRECT BAND GAP POWER DEVICES THROUGH OPTICAL EMISSION EXTRACTION (opens in a new tab)

  15. Top-Emitting OLEDs

    In the last decades, investigations of organic light-emitting diodes (OLEDs) have tackled several key challenges of this lighting technology and have brought the electron to photon conversion efficiency close to unity. However, currently only 20% to 30% of the photons can typically be extracted …

    qucosa-diss

  16. Development of aluminum gallium nitride-based emitters in the form of graded-index separate confinement heterostructure (GRINSCH)

    … difficult. Another problem is the generally poor light extraction efficiency from both UV and visible LEDs. This research addressed the first problem by developing UV emitters in the form of graded-index-separate-confinement-heterostructure (GRINSCH). In these device the active region is embedded …

    bu Repository record for Development of aluminum gallium nitride-based emitters in the form of graded-index separate confinement heterostructure (GRINSCH) (opens in a new tab)

  17. Fabrication and optical characterization of nanostructures on semiconductor materials

    … with dimensions smaller than the wavelength of light, results in optical properties which are significantly different from the bulk materials. Such structures, normally patterned as a highly ordered lattice array ranging from tens to hundreds of nanometers in size, are of interest for …

    ttu Repository record for Fabrication and optical characterization of nanostructures on semiconductor materials (opens in a new tab)

  18. Optical Property Study of 2D Graded Photonic Super-Crystals for Photon Management

    … focused primarily on manipulation and control of light by using the newly discovered GPSCs which present great opportunity for electromagnetic wave control in photonic devices. The GPSC has been used to explore the superior capability of improving the light extraction efficiency of OLEDs. The …

    unt Repository record for Optical Property Study of 2D Graded Photonic Super-Crystals for Photon Management (opens in a new tab)

  19. Development of Iii-Nitride Non-Polar Leds and Self-Aligned Laser Structure

    <p>Light Emitting Diodes (LEDs) are finding numerous applications in several commercial systems because they have unique properties. LEDs are more energy efficient, robust, small in size, very reliable and are sustainable in hazardous environmental conditions making them a good substitute for …

    south-carolina Repository record for Development of Iii-Nitride Non-Polar Leds and Self-Aligned Laser Structure (opens in a new tab)

  20. Fabrication and characterization of UV-LEDs

    … the emerging technology of ultraviolet light-emitting diodes (UV LEDs) based on III-nitride materials. Despite the incredible improvement of these devices over the past decade, if compared with visible LEDs based on the same semiconductor system, UV LEDs still suffer from a much reduced …

    cork Repository record for Fabrication and characterization of UV-LEDs (opens in a new tab)

Page 1 of 4