Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 139 for “"Light load"”.

  1. Maximum acceptable frequency of light load weight lifting

    … paid much attention to high frequency lifting of light loads. There are still few data on the acceptable maximum frequency of lifting for light loads, both in standard and non-standard postures. Workers who have to perform high frequency lifting of light loads need to improve their working …

    ttu Repository record for Maximum acceptable frequency of light load weight lifting (opens in a new tab)

  2. Light-load power management in differential power processing systems

    This Dissertation was approved for publication on 2020-04-03 at 15:58.

    uiuc Repository record for Light-load power management in differential power processing systems (opens in a new tab)

  3. A Dual-Supply Buck Converter with Improved Light-Load Efficiency

    … However portable devices usually operate at light loads most of the time and are only required to deliver high current in very short periods, while conventional buck converter suffers from low efficiency at light load due to the switching losses that do not scale with load current. In this …

    tamu Repository record for A Dual-Supply Buck Converter with Improved Light-Load Efficiency (opens in a new tab)

  4. A Dual Supply Buck Converter with Improved Light Load Efficiency

    … However, portable devices are operating under light load condition for the most of the time. Conventional buck converters suffer from low light-load efficiency which severely limits battery lifetime. In this project, a novel technique for buck converter is proposed to reduce the switching loss …

    tamu Repository record for A Dual Supply Buck Converter with Improved Light Load Efficiency (opens in a new tab)

  5. Energy savings on single-phase induction motors under light load conditions

    … efficiency of an electric motor is reduced at lighter load, numerous studies have been conducted in the past to reduce motor losses under such load conditions by either lowering the supply voltage (and in some cases, supply frequency) by means of static power converters. But some articles …

    unlv Repository record for Energy savings on single-phase induction motors under light load conditions (opens in a new tab) Download PDF for Energy savings on single-phase induction motors under light load conditions (opens in a new tab)

  6. Improving the Light Load Performance of Power Factor Correction Converters Using a Digital Controller

    … and lower THD, especially at output power loads much less than the rated output power of the AC-DC converter, new methods have been developed to meet either or both requirements. Many methods, however, can improve light load efficiency, but increase THD. Other methods, can reduce THD, but …

    queens Repository record for Improving the Light Load Performance of Power Factor Correction Converters Using a Digital Controller (opens in a new tab)

  7. A Two-Mode Synchronous Buck Converter for Low-Power Devices with the Sleep Mode

    … in car black box varies significantly between light load and heavy load. The high efficiency voltage regulator is necessary in prolong the life of smart camera battery. Since the smart camera only recording the video when car is driving, the most time of the smart camera works in the sleep …

    vt Repository record for A Two-Mode Synchronous Buck Converter for Low-Power Devices with the Sleep Mode (opens in a new tab)

  8. High efficiency and digitally controlled AC-DC converter with power factor correction and fast output voltage regulation

    High efficiency and power factor at light load are increasingly desired in desktop computer power supplies for energy saving initiative and product differentiation with the certification of energy saving programs. However, the efficiency and power factor of power factor correctors (PFCs) in desktop …

    nus Repository record for High efficiency and digitally controlled AC-DC converter with power factor correction and fast output voltage regulation (opens in a new tab) Download file for High efficiency and digitally controlled AC-DC converter with power factor correction and fast output voltage regulation (opens in a new tab)

  9. A Two-Phase Buck Converter with Optimum Phase Selection for Low Power Applications

    … to increase the power converter efficiency for light load, while being able to manage heavy load. The power stage of traditional buck converter is optimized for maximum load, at the cost of light-load efficiency. Wei proposed a multiphase buck converter incorporating the baby-buck concept and …

    vt Repository record for A Two-Phase Buck Converter with Optimum Phase Selection for Low Power Applications (opens in a new tab)

  10. A Two-mode Buck Converter toward High Efficiency for the Entire Load Range for Low Power Applications

    … efficiency of power converters, especially at light load. This thesis research investigated a power converter to supply power for the microprocessor of a smart camera. The input voltage of the converter is 5 V, and the output voltage is 1.2 V with the load ranging from 10 mA (12 mW) to 1200 mA …

    vt Repository record for A Two-mode Buck Converter toward High Efficiency for the Entire Load Range for Low Power Applications (opens in a new tab)

  11. A phase shedding technique for PV system based on interleaved boost converter

    … phase can be disadvantage for the converters at light load condition. Especially for PV applications which rely on changeable irradiation or temperature condition, low efficiency at light load condition is a critical problem on the PV system. This thesis demonstrates the improvement and …

    unsw Repository record for A phase shedding technique for PV system based on interleaved boost converter (opens in a new tab)

  12. Design of a 48-1.8V GaN based dual active bridge converter with Phi-2 resonant gating

    … often have to sustain higher ranges of loads and especially for applications like Point of Load (POL) regulators and data-centre specific applications where the conversion ratio is very high and also the converter lives in light load conditions for a significant part of its lifetime. In …

    texas Repository record for Design of a 48-1.8V GaN based dual active bridge converter with Phi-2 resonant gating (opens in a new tab)

  13. A Constant ON-Time 3-Level Buck Converter for Low Power Applications

    … cameras operate mostly in sleep mode, which is light load for power supplies. Typical buck converter applications have low efficiency under the light load condition, primarily from their power stage and control being optimized for heavy load. The battery life of a smart camera can be extended …

    vt Repository record for A Constant ON-Time 3-Level Buck Converter for Low Power Applications (opens in a new tab)

  14. Development of a Low-Cost, Photovoltaic-Powered, Automated Water Recovery System

    … of water per day rinsing out solid waste under light load. To reduce CIMWI’s water and energy consumption, an automated system was designed and built to recover the rinse water and return it to the existing filtration loop. Models for fluid system requirements, basic energy needs, and photo- …

    calpoly Repository record for Development of a Low-Cost, Photovoltaic-Powered, Automated Water Recovery System (opens in a new tab)

  15. High Voltage Synchronous Rectifier Design Considerations

    … rectifier: (1) high voltage sensing; (2) light load effects; (3) accuracy. The first hurdle to designing a high voltage SR system is the high voltage itself. Traditional methods of synchronous rectification (SR) attempt to directly sense voltage or current, which is not possible with high …

    vt Repository record for High Voltage Synchronous Rectifier Design Considerations (opens in a new tab)

  16. Beyond PWM: Active balancing, start-up and ZVS for multi-level converters with applications in renewable energy systems

    … However, prior work did not account for light load conditions, which we show to be challenging for traditional duty cycle compensation. Here we derive the light load conditions that lead to instability, and propose a new constant effective duty cycle compensation method for active …

    uiuc Repository record for Beyond PWM: Active balancing, start-up and ZVS for multi-level converters with applications in renewable energy systems (opens in a new tab)

  17. Voltage regulation of a series stacked system of digital loads by differential power processing

    … to be an efficient way to series-stack server loads. In this work we study the dynamics of the element-to-element DPP topology implemented with bi-directional buck-boost converters. Some of its dynamic drawbacks are pointed out and a topological modification to counter those drawbacks is …

    uiuc Repository record for Voltage regulation of a series stacked system of digital loads by differential power processing (opens in a new tab)

  18. Voltage regulation of a series stacked system of digital loads by differential power processing

    … to be an efficient way to series-stack server loads. In this work we study the dynamics of the element-to-element DPP topology implemented with bi-directional buck-boost converters. Some of its dynamic drawbacks are pointed out and a topological modification to counter those drawbacks is …

    uiuc Repository record for Voltage regulation of a series stacked system of digital loads by differential power processing (opens in a new tab)

  19. Investigation on Interleaved Boost Converters and Applications

    … such as power scalability, high entire-load-range efficiency, and high power density. Power scalability is a very desirable and cost-effective approach in the PFC design in order to keep up with servers' growing power requirements. Higher power density can eventually reduce the converter …

    vt Repository record for Investigation on Interleaved Boost Converters and Applications (opens in a new tab)

  20. Phase shift modulation in bidirectional resonant CLLC chargers

    … (EV) chargers: (i) efficiency degradation under light-load operation due to excessive circulating current, and (ii) current imbalance in interleaved converter structures arising from resonant-tank parameter mismatches. The first major contribution of this work is the development of an improved …

    ubc Repository record for Phase shift modulation in bidirectional resonant CLLC chargers (opens in a new tab) Download PDF for Phase shift modulation in bidirectional resonant CLLC chargers (opens in a new tab)

Page 1 of 7