Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"Light load efficiency"”.
-
A Dual-Supply Buck Converter with Improved Light-Load Efficiency
… in powering portable devices due to their high efficiency, compact sizes and high current delivery capability. However portable devices usually operate at light loads most of the time and are only required to deliver high current in very short periods, while conventional buck converter suffers …
-
A Dual Supply Buck Converter with Improved Light Load Efficiency
… size, good current delivery capability and high efficiency. However, portable devices are operating under light load condition for the most of the time. Conventional buck converters suffer from low light-load efficiency which severely limits battery lifetime. In this project, a novel technique …
-
Improving the Light Load Performance of Power Factor Correction Converters Using a Digital Controller
… a trade-off for a reduction in overall converter efficiency. With increasing requirements for greater efficiency and lower THD, especially at output power loads much less than the rated output power of the AC-DC converter, new methods have been developed to meet either or both requirements. Many …
-
A Two-Mode Synchronous Buck Converter for Low-Power Devices with the Sleep Mode
… in car black box varies significantly between light load and heavy load. The high efficiency voltage regulator is necessary in prolong the life of smart camera battery. Since the smart camera only recording the video when car is driving, the most time of the smart camera works in the sleep …
-
Design of a 48-1.8V GaN based dual active bridge converter with Phi-2 resonant gating
… often have to sustain higher ranges of loads and especially for applications like Point of Load (POL) regulators and data-centre specific applications where the conversion ratio is very high and also the converter lives in light load conditions for a significant part of its lifetime. In …
-
Investigation on Interleaved Boost Converters and Applications
… such as power scalability, high entire-load-range efficiency, and high power density. Power scalability is a very desirable and cost-effective approach in the PFC design in order to keep up with servers' growing power requirements. Higher power density can eventually reduce the converter …
-
Design Optimization Of Llc Topology And Phase Skipping Control Of Three Phase Inverter For Pv Applications
… the available power with maximum possible efficiency. Typically, a microinverter consists of two important blocks; a Front End DC-DC Converter and Output DCAC Inverter. This thesis proposes efficiency optimization techniques for both the blocks of the micro-inverter. iv Efficiency …
-
A Constant ON-Time 3-Level Buck Converter for Low Power Applications
… cameras operate mostly in sleep mode, which is light load for power supplies. Typical buck converter applications have low efficiency under the light load condition, primarily from their power stage and control being optimized for heavy load. The battery life of a smart camera can be extended …
-
A Two-Phase Buck Converter with Optimum Phase Selection for Low Power Applications
… it is essential to increase the power converter efficiency for light load, while being able to manage heavy load. The power stage of traditional buck converter is optimized for maximum load, at the cost of light-load efficiency. Wei proposed a multiphase buck converter incorporating the baby-buck …
-
Two-Phase Buck Converter Optimize by Echo State Network
… input voltage into a low output voltage in high efficiency. With this characteristic, it has been used in a great number of applications. Optimized the maximum load to increase the buck converter's efficiency at the cost of light load efficiency is a general way used in a traditional buck …
-
Power Architectures and Design for Next Generation Microprocessors
… producing a significant overall system efficiency improvement. However, 48V rack architecture raises significant challenges for the voltage regulator modules (VRMs) required for powering the processor. The 48V VRM in the vicinity of the CPU needs to be designed with very high efficiency, …
-
State-Trajectory Analysis and Control of LLC Resonant Converters
… servers, desktops, laptops, flat-panel TVs, LED lighting, etc. are required for more power delivery with smaller spaces. The LLC resonant converter has been widely adopted for these applications due to the advantages in high efficiency, high power density and holdup time operation capability. …
-
High Frequency High-Efficiency Voltage Regulators for Future Microprocessors
… 12V-input multiphase buck converter suffers low efficiency at high switching frequency, which rules out a legitimate chance of the current VR topology benefiting from high switching frequency. The extreme duty cycle is the fundamental reason why the 12V-input multiphase buck converter is not …
-
A Two-mode Buck Converter toward High Efficiency for the Entire Load Range for Low Power Applications
… smart cameras, it is essential to increase the efficiency of power converters, especially at light load. This thesis research investigated a power converter to supply power for the microprocessor of a smart camera. The input voltage of the converter is 5 V, and the output voltage is 1.2 V with …
-
Microcontroller (MCU) Based Simplified Optimal Trajectory Control (SOTC) for High-Frequency LLC Resonant Converters
… widely used as a DC-DC converter due to its high efficiency, high power density and hold-up capability in power supplies for communication systems, computers and consumer electronics. Use of the high-frequency LLC converter has also been increasing in recent years due to its high power density and …
-
Analysis and Design of Hybrid Divided Power Converters
… volume while also increasing power processing efficiency by utilizing the increased power density of SC converters and parallelizing power processing to reduce both passive volume and switch blocking voltage. The thesis places these converters in the emerging field of hybrid power converters, a …
-
Advanced Control Schemes for Voltage Regulators
… should be high in order to meet the stringent load-line requirements with the high current and high di/dt, otherwise, a lot of decoupling capacitors are necessary. Capacitors make the VR cost and size higher. Therefore, the VR control method is very important. This dissertation discusses the …
-
Dual-frequency dual-inductor multiple-outputs (DF-DIMO) buck converter topologies with fully-integrated output filters
… of output voltage with up to hundreds of mA load current. In this dissertation, the key performance metrics in power converter design are introduced, the advantages and dis-advantages of the conventional power converter topology are analyzed and a new Dual-Frequency Dual-Inductor …
-
Synchronous-Conduction-Mode Tapped-Inductor Buck Converter for Low-Power, High-Density Application
… conversion range, high power density and high efficiency topology for low power application. To achieve high efficiency at switching frequency of MHz-level, synchronous conduction mode (SCM) is applied for turn-on losses elimination. The operation principle and power stage design of SCM TI buck …
-
High Performance Silicon Carbide based Converters for Powertrain Electrification
… but also come with other benefits such higher efficiency and better user experience. Many countries and vehicle manufactures have made their plans to keep up with this trend in vehicle electrification. Powertrain is an assembly of components in a vehicle that pushes it forward. As for EVs and …
Page 1 of 3