Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Limestone aggregates"”.

  1. Optical gradation for crushed limestone aggregates

    … and to predict the sieving behavior for crushed limestone aggregates was developed and tested. Laboratory testing demonstrated the ability to measure gradation over a range of particle sizes from 4.75 mm to 25 mm with an accuracy of +/-3 in terms of percent-passing residual when compared with …

    wvu Repository record for Optical gradation for crushed limestone aggregates (opens in a new tab)

  2. Structural Evaluation of Prestressed Self-Consolidating Concrete Bridge Girders Using Limestone Aggregates

    … of self-consolidating concrete (SCC) using limestone aggregates for prestressed girder applications. To fulfill the objective of this research, three full-scale prestressed girders were fabricated and tested to evaluate transfer length, prestress losses, camber, flexural behavior and …

    sdstate Repository record for Structural Evaluation of Prestressed Self-Consolidating Concrete Bridge Girders Using Limestone Aggregates (opens in a new tab)

  3. Explaining the difference in freeze-thaw resistance of two similar “high-quality” limestone aggregates

    … durability of pavement constructed with these aggregates. These tests factor in the bulk elemental chemistry of the carbonate (calcium-rich, magnesium-rich, or a mixture), the alumina percentage (a proxy for clay content), and the pore system (the volume of “micropores”). While these tests have …

    iastate Repository record for Explaining the difference in freeze-thaw resistance of two similar “high-quality” limestone aggregates (opens in a new tab)

  4. Microscopic and Image Processing Characterization of Aggregates to Predict ASR Expansion Potential of Concrete

    … reliable and quick methods to identify reactive aggregates and to evaluate proper mitigation alternatives. The current accelerated mortar-bar expansion tests (ASTM C 1260 or ASTM C1567) and the concrete prism expansion test (ASTM C 1293) have been reported to have several limitations. Assessment …

    utk-theses Repository record for Microscopic and Image Processing Characterization of Aggregates to Predict ASR Expansion Potential of Concrete (opens in a new tab)

  5. Investigation of Electrical Properties of Earth Materials by Ground Penetrating Radar

    … this research were sandy soils, clayey soils and limestone aggregates. A model PVC tank supported with a metal frame and a concrete slab divided into four sections with each section simulating a different known condition were constructed to help in this research. The radar graphical outputs …

    ucf Repository record for Investigation of Electrical Properties of Earth Materials by Ground Penetrating Radar (opens in a new tab)

  6. Prestress Losses in Lightweight Self-Consolidating Concrete

    … cast with expanded clay, expanded shale, and limestone aggregates. Strains in the beams were measured with vibrating-wire strain gages, and the measured prestress losses were compared with current AASHTO methods for calculating prestress losses. The AASHTO approximate method better predicted …

    arkansas Repository record for Prestress Losses in Lightweight Self-Consolidating Concrete (opens in a new tab)

  7. High Performance Concrete in Bridge Applications

    … are self-consolidating concrete (SCC) made with limestone coarse aggregates for use in prestressed bridge girders and low cracking-high performance concrete (LC-HPC) used in bridge decks to control bridge deck cracking. Prestressed bridge girders made with SCC have been selected as part of the …

    sdstate Repository record for High Performance Concrete in Bridge Applications (opens in a new tab)

  8. Performance of hot-mix asphalt mixtures for a balanced mix design

    … asphalt mixtures move towards a BMD. Conversely, limestone aggregates and recycled asphalt shingles reduced cracking resistance and did not lead to a BMD.

    manitoba Repository record for Performance of hot-mix asphalt mixtures for a balanced mix design (opens in a new tab)

  9. Evaluation of binder grades on rutting performance

    … pavement. The base course was a 37.5 mm mix with limestone aggregates and the wearing course was a 12.5 mm mix with predominantly blast furnace slag aggregates.;The three different binders were compared by making specimens with each of the two mix designs. The Asphalt Pavement Analyzer, APA, was …

    wvu Repository record for Evaluation of binder grades on rutting performance (opens in a new tab)

  10. Corrosion mechanisms and structural performance evolution of alkali-activated fly ash and slag concretes

    … influence of aggregate types (gravel and limestone) and precursor composition on the mechanical and fracture properties of AAFS concrete and mortar were investigated. While concrete generally shows lower compressive strength than mortar, the 50SA-50FA gravel and 30SA-70FA limestone …

    strathclyde Repository record for Corrosion mechanisms and structural performance evolution of alkali-activated fly ash and slag concretes (opens in a new tab)

  11. Shrinkage and cracking behavior of HPC used for bridge deck overlays

    … were replaced by 20%, 15% and 5.6% respectively. Limestone coarse aggregate was used in 10 mixes and 1 mix with quartzite. Two gradations of coarse aggregate were used for limestone aggregates. The HPC mixes were investigated for free drying, restrained ring, elastic modulus, compressive and split …

    iastate Repository record for Shrinkage and cracking behavior of HPC used for bridge deck overlays (opens in a new tab)

  12. Μελέτη της ενσωμάτωσης θερμοπλαστικών απορριμμάτων στη σύνθεση διαφόρων τύπων σκυροδέματος

    … those can be exploited as a part of conventional aggregates in concrete. Β) Physicomechanical properties of concrete containing thermoplastics Μixes of concrete containing HDPE and PP 0, 7, 12 and 20% by volume of aggregates were made. Results showed that the substitution of a part of conventional …

    greece Repository record for Μελέτη της ενσωμάτωσης θερμοπλαστικών απορριμμάτων στη σύνθεση διαφόρων τύπων σκυροδέματος (opens in a new tab)

  13. Διαπερατό σκυρόδεμα: ανάπτυξη, σχεδιασμός, μελέτη ιδιοτήτων και περιβαλλοντικά οφέλη

    … pervious concrete by using either conventional limestone aggregates or alternatives (like steel slag, construction and demolition wastes). Pervious concrete is currently an alternative flood prevention measurement. Its main characteristic lies on its high porosity, which allows rain water to …

    greece Repository record for Διαπερατό σκυρόδεμα: ανάπτυξη, σχεδιασμός, μελέτη ιδιοτήτων και περιβαλλοντικά οφέλη (opens in a new tab)

  14. Stress-dependent deformations of concrete using porous aggregates

    … basalt rock is the primary source of concrete aggregates in Iceland. Design codes and mathematical models are based on experiments and experience using specific raw materials, not necessarily applying globally. It is therefore essential to validate codes and models to assess their …

    reykjavik Repository record for Stress-dependent deformations of concrete using porous aggregates (opens in a new tab)

  15. Numerical Evaluation of Square Reinforced Concrete Slabs Incorporating High Volumes of Recycled Materials

    … required for concrete production (e.g., aggregates, sand, potable water, etc.) continue to diminish, this poses a series problem for the long-term viability for the concrete construction industry. A three-pronged solution to this problem is therefore required which focuses on reducing, …

    york Repository record for Numerical Evaluation of Square Reinforced Concrete Slabs Incorporating High Volumes of Recycled Materials (opens in a new tab)

  16. Describing the rheology of vibrated, no-slump concrete for application in 3D-printing construction

    … rates. Concrete can be considered a volume of aggregates suspended in cement paste and therefore a granular suspension. Several constitutive models have been proposed to describe the rheological behavior of vibrated granular suspensions but only on idealized fluids and at small scales. This …

    uiuc Repository record for Describing the rheology of vibrated, no-slump concrete for application in 3D-printing construction (opens in a new tab)

  17. Portland clinker from by-products and recycled materials out of the building and construction sector

    … of by-products out of porphyry and dolomitic limestone aggregates production on Portland clinker production was investigated. Porphyry and dolomitic limestone aggregates represent a group of raw materials which are used at a daily base in many construction applications. The by-products are …

    ghent Repository record for Portland clinker from by-products and recycled materials out of the building and construction sector (opens in a new tab)

  18. Μηχανικά χαρακτηριστικά και ανθεκτικότητα σκυροδεμάτων παρασκευασθέντων με σκωρία χαλυβουργίας

    … electric furnace slag and ladle furnace slag as aggregates, to produce common concretes. These slags are industrial by-products of the steel industry.The aim of the thesis is the preparation of concretes with slag aggregates, which will be widely used in ordinary constructions. The use of slag, …

    greece Repository record for Μηχανικά χαρακτηριστικά και ανθεκτικότητα σκυροδεμάτων παρασκευασθέντων με σκωρία χαλυβουργίας (opens in a new tab)