Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Limit equilibrium analysis"”.
-
Mine waste dump instability
… in terms of conventional slope stability analysis. Failure is often rapid with runout distances of up to 2 km causing increased concern within the industry over potential impacts to the environment and risks to the safety of personnel, equipment and infrastructure. A comprehensive review …
-
Bingham Canyon Landslide: Analysis and Mitigation
… pit mines. This comprehensive study concerns the analysis of thelandslide at Bingham Canyon Mine and the mitigation of future, largescaleslope failures. The Manefay Slide was modeled into a twodimensional,limit equilibrium analysis program to find thecontrolling factors behind the slope failure. …
-
Cut slope design for the access to an underground copper mine
Slope stability analysis is a major area of research in geotechnical engineering. That being said, very little is written in the geotechnical engineering literature on the design of box-cuts. The goal of this thesis will be to investigate the proper design of a boxcuts, and to design a box-cut for …
-
Slope Failure in Cretaceous Clay Shale in Western Manitoba: A Case Study
… were compared with values back analyzed using limit equilibrium analysis. A coupled finite element model was used to model the expected excess porewater pressure response, and therefore the stability of the slope, during construction of a stabilization berm. It was subsequently calibrated to …
-
COMPARING SCOOP3D AND GIS-TISSA MODELS FOR SLOPE STABILITY ANALYSIS IN IDUKKI, KERALA, INDIA
… for regional-scale landslide susceptibility analysis using geospatial tools. In this study, we compare two physics-based models using the same data from Idukki. The two models are the Geographic Information System-Tool for Infinite Slope Stability Analysis (GIS-TISSA) that utilizes the …
-
Toppling failure in the Marmot Vertical Limb at Quintette Coal Ltd., Tumbler Ridge, British Columbia
… mine and monitor method developed and the back analysis of the failure. The areas researched include: regional and local geology, structural geology in the Vertical Limb, mine development, the groundwater conditions encountered, the blasting practices used, the artificial support systems …
-
Investigations into the Shear Strength Reduction method using distinct element models
… the rockmass than simpler methods such as limit equilibrium (e.g. either method of slices or wedge solutions) and even numerical continuum models (e.g. finite difference, finite element). Joints are explicitly modelled and can exert a range of influences on the SSR result. Simple …
-
Numerical Analysis of Leakage through Defective Geomembrane Liners in Embankment Dams
… an earthen dam. Two-dimensional (2D) numerical analysis was performed to evaluate leakage through defective seams within an earthen dam. Five possible applications of internal geomembrane systems were initially modeled to locate the zero-pressure lines in an earthen dam. Then, another …
-
PROBABILISTIC REGIONAL LANDSLIDE HAZARD ASSESSMENT FOR THE ENGURI DAM (JIVARI, GEORGIA)
… assessment of the broader area impossible. Only limited previous work has been completed and it was focused on a single creeping landslide. This work evaluated the landslide hazards for the reservoir area using data from past studies, field investigations, and remotely sensed inputs, integrated …
-
Automation of Slope Stability Calculations A comparison between Conventional Slope/w Analysis and Plaxis Analysis Controlled by Python code
… A comparison is made between the traditional limit equilibrium analysis using Slope/w and the finite element method based slope stability analysis using Plaxis. The objective is to create comparable geotechnical models in both programs and develop a Python code to automate the modelling in …
-
A Risk-Based Slope Stability Assessment Methodology (SSAM) for Excavated Coal Mine Slopes
… such slopes. These include empirical, kinematic, limit equilibrium, and numerical modelling. Each method has its advantages and limitations when used to assess the stability of an excavated coal mine slope design. A review of the literature highlighted a gap in the field for a classification …
-
Submarine landslides offshore Vancouver Island, British Columbia and the possible role of gas hydrates in slope stability
… subduction zone. As the first slope stability analysis on the west coast of Vancouver Island, this study covers a variety of large-scale tectonic to small-scale, site-specific factors to investigate the nature of slope failure. Slope failure occurred mainly on the steep slopes of frontal ridges …
-
Three dimensional numerical modelling of rows of discrete piles used to stabilise large landslides
… as assumed by Viggiani, agree well with his limit equilibrium solutions. The further analyses show that the strength of the slip plane interface has a considerable influence on the pile behaviour, and that the slope of the ground surface is only significant above certain angles. The behaviour …
-
Shaft Resistance of Driven Piles in Overconsolidated Cohesionless Soils
… An analytical model was also developed based on limit equilibrium analysis using the horizontal slice method to predict the shaft resistance of a pile driven into normally consolidated cohesionless soils. The model assumes an inclined failure surface around the pile that accounts for the shear …
-
Soil and Slope Stability Study of Geomorphic Landform Profiles versus Approximate Original Contour for Valley Fill Designs
… performed involved grain size distribution analysis, hydrometer analysis, saturated shear strength testing under an insitu consolidation load, Atterberg limits including plastic and liquid limits, compaction at three predetermined compaction energies, and rigid wall permeameter hydraulic …
-
An Optimization Approach Coupling Rockfall Simulation and Slope Stability Analysis for New Rock Cut Profiles
… rock classifications.;A parametric sensitivity analysis was conducted using WVDOH DD-403 geometric parameters for bench cut bedrock cut slopes. Using Oregon Department of Transportation specifications as a guideline, a threshold of ninety percent on-slope rockfall retention was imposed as a …
-
Advancements for the Numerical Simulation of Free Fall Penetrometers and the Analysis of Wind Erosion of Sands
… is derived using a continuum approximation and limit equilibrium analysis. The erosion law considers geotechnical parameters, the effects of slope, and moisture suction, in a combined manner. The proposed model is theoretically consistent with existing expressions in the literature. It covers a …
-
Stress developments within a backfilled mine stope and the lateral loading on the barricade
… and analytical equations are established, with limit equilibrium analysis method, for the vertical stress determination within the stope, considering the stope perimeter to the cross sectional areas as the basis. Numerical simulations were carried out to record the vertical stress at the bottom …
-
Stress distribution within geosynthetic-reinforced soil structures
… a finite element research code, named Nonlinear Analysis of Geotechnical Problems (ANLOG). The updated finite element model was validated against actual measurement data from centrifuge testing on GRS slopes (under both working stress and failure conditions). Examined here is the soil and …
Page 1 of 2