Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Line profile analysis"”.
-
The application of x-ray diffraction line profile analysis to the study of anti-phase domains in lithium ferrite
… transition were found to exhibit sharp lattice lines (h,k,2 of similar parity) and superlattice lines (h,k,1l, of-mixed parity) whose breadths normally exceeded those of the lattice lines. Similar diffraction patterns were also obtained from specimens of lithium ferrite into which partial …
-
Investigating the Microstructural Stability of Nanocrystalline Oxide Dispersion-Strengthened Alloys under Proton Irradiation by X-ray Line Profile Analysis
Nanocrystalline (NC) alloys contain unique defect structures compared to conventional Coarse-Grained (CG) alloys. NC alloys have smaller grains, and therefore higher Grain Boundary (GB) volume fraction, higher dislocation density and more ordered dislocation structures. Experimental and …
-
A study of the cold worked state and annealing behavior of the austenitic stainless steels
… stainless steels (AISI types 304 and 316). X-ray line profile analysis has been used to measure the stacking fault energies of the seven steels. Transmission electron microscopy combined with the x-ray line profile analysis was used to characterized the cold worked state of the steels. The …
-
Deformation Study of Nanocrystalline Ni-Fe Alloy using Synchrotron Diffraction
… <p>The main experimental and data-analysis methods employed in this research are synchrotron high-energy X-ray diffraction, X-ray line profile analysis, and texture analysis. The combination of these methods is beneficial to the accurate microstructural interpretation of the bulk …
-
X-ray Scattering Investigations Of Metallic Thin Films
… placed on (1) phase identification of polycrystalline thin films, (2) the evaluation of the grain size and microstrain of metallic thin films by line profile analysis, and (3) the study of morphological evolution in solid/solid interfaces. To illustrate the continued relevance of x-ray diffraction …
-
Design, development and use of a deformable breast phantom to assess the relationship between thickness and lesion visibility in full field digital mammography
… evaluation the following methods were utilised: line profile analysis, contrast-to noise ratio (CNR), signal-to noise ratio (SNR) and figure of merit (FOM).Results: The results of the visual perception analysis of the mammograms demonstrate that as breast compressed thickness reduces the image …
-
Strengthening mechanisms in some heat-treated low alloy steels
… low alloy steels have been studied using x-ray line profile analysis, electron microscopy and electron diffraction. Yield strengths of the steels at 20°C have been determined after different heat treatments, and have been related to structure in terms of theories for various strengthening …
-
Emulating Radiation-Induced Defect Microstructures by Neutrons and Dark Matter Using Ions
… was microstructural characterization, including line profile analysis and transmission electron microscopy. Our results show how minor irradiation-induced defects evolve under different conditions and in different materials. Proton irradiation experiments tested olivine's viability as a …
-
Advanced Characterization of Nanocrystalline Materials by Synchrotron Radiation X-ray Diffraction
… the optics and general setâ up of the beamline, which contribute to the Instrumental Profile Function (IPF). Exploring and characterizing the optical components for powder diffraction beamlines is the bottom line of the present Thesis, with the purpose of properly calibrating and adjusting …
-
Effects of high shear deformation from equal channel angular pressing-conform on the microstructural and mechanical properties of magnesium alloys
… (EBSD) and x-ray diffraction (XRD) with x-ray line profile analysis (XLPA); the mechanical properties are measured by tensile tests with 2D digital image correlation (DIC). Processing temperature has the largest impact on the grain size and dislocation density of ECAP-C processed Mg where …
-
The relationship between mechanical properties and microstructure of HT9 steel
… behavior of HT9 was examined using diffraction line profile analysis methods. Analysis of the shift in diffraction peak position during deformation of the specimens allowed for the determination of elastic lattice strains in the two primary constituent phases of the material: the …
-
Static and dynamic disorder in nanocrystalline materials
Peak profiles in X-ray Diffraction (XRD) patterns from nanocrystalline materials are affected by static and dynamic disorder which is specific of the size and shape of the nanocrystalline domains. Owing to their intrinsic differences, the two types of disorder can be separated, providing …
-
Molecular Dynamics and X-ray Powder Diffraction Simulations: Investigation of nano-polycrystalline microstructure at the atomic scale coupling local structure configurations and X-ray powder Diffraction techniques
… lattice distortions in metallic nano-polycrystalline microstructures, with the purpose of supporting the analysis of the X-ray powder diffraction patterns with a better, atomic level understanding of the studied system. Complex microstructures were generated with a new modified Voronoi …
-
Radiation damage and transmutation in tungsten-alloys for nuclear fusion applications
… slight enrichment of Re measured using cluster analysis techniques. The clusters in the neutron irradiated ma- terial on the other hand were dense and comprised mainly of Re, but with a central Os rich core. Cluster analysis methods showed cluster compositions comparable to samples from the Joyo …
-
Multi-Scale Synchrotron X-ray Diffraction of Welded and Additively Manufactured Components
… to match real conditions. X-ray Diffraction Line Profile Analysis (DLPA) can be used to characterize microstructural defects such as dislocation density, dislocation character, and coherent scattering domain size, which are the focus of this thesis. The present work is four-fold: First, a …
-
Fatigue Behavior of a Quenched and Tempered Nb-bearing HSLA Steel
… low and high cycle fatigue tests, x-ray line profile analysis, stress relaxation tests, fatigue crack propagation tests and measurements of the plastic work required to propagate a fatigue crack. One heat treatment (40H5) produced a quenched and tempered martensitic structure without NbC …
-
Mechanical activation of ultramafic mine waste materials for enhanced mineral carbonation
… rocks, using X-ray diffraction patterns and line profile analysis methods with full pattern fitting method. The second approach was to compare the structural and chemical changes of mine waste with pure olivine, both of which were activated by various mechanical forces under both wet or dry …
-
Microstructural Evaluation and Thermal Creep Behavior of Zr-Excel
… in the room temperature texture. In Chapter 4, line profile analysis technique has been used to quantitatively analyze the microstructural details of the heat-treated materials. Diffraction pattern analyses demonstrated significant peak broadening in the heat-treated material; which is …
-
Dependence of Microstructure Evolution, Texture, and Mechanical Behavior of A Mg Alloy on Thermo-Mechanical Input during Friction Stir Processing
… and its influence on the DRX process. X-ray line profile analysis (XLPA) provides further insights by highlighting the differences in the dislocation density/types, subgrain sizes, and twin densities during the DRX processes operating with or without the twinning.</p> <p>Secondly, the …
-
Characterization of Deformation Mechanisms in Zirconium Alloys: Effect of Temperature and Irradiation
… measurement of dislocation density by means of line profile analysis of neutron diffraction patterns, as well as TEM observations of the dislocation microstructural evolution, is described. In Chapter 6 a hot-rolled Zr-2.5Nb with a larger grain size compared with the pressure tubing was used to …
Page 1 of 2