Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Line width roughness"”.
-
Novel resist materials for next generation lithography
… in order to optimise sensitivity, resolution, line width roughness and etch resistance is presented. Sensitivity of sub 10 C/cm2 at 20 keV, half pitch resolution of 20 nm, a minimum sparse feature linewidth of 12 nm, line width roughness of sub 5 nm, and high etch resistance comparable with a …
-
Process-Property Linkages Construction for Inkjet Printing with Machine Learning
… the morphology specifications, i.e., print line width, overspray, and roughness to the processing parameters, i.e., cartridge height, nozzle voltage, and drop spacing, via a neural network model. The order of machine learning model accuracy from high to low is for line width, roughness, and …
-
Block Copolymer Directed Self-Assembly: Exploring the Efficacy of Applications in Semiconductor Fabrication
… applications in contact-hole patterning and line-space patterning, respectively. Although the nanostructures found in bulk block copolymer materials are naturally unaligned, directed self-assembly techniques such as graphoepitaxy and chemoepitaxy use a pre-patterned underlayer to guide the …
-
Investigation into obstacles to the implementation of the directed-self assembly of block copolymers
… production of adequate BCP materials, high line edge roughness (LER) and line width roughness (LWR), and high defect densities. This work explores possible reasons for high LER, LWR, and defects using coarse-grained molecular dynamics and expands the library of BCP materials by synthesizing …
-
Reduction of Line Edge Roughness in Semiconductor Photoresist by Means of a Grazing Incidence Ion Beam
… sizes continue to decrease, the phenomena of line edge roughness (LER) becomes more disruptive in chip manufacturing. While many efforts are underway to decrease LER from the photoresist, post-develop smoothing techniques may be required to continue shrinking chip features economically. This …
-
THERMAL AND REACTIVE TRANSPORT PHENOMENA IN PLASMA WITH NUMERICAL MODELING
… 5 nm, it is vital to control Non-uniformity, Line Edge Roughness (LER), and Line Width Roughness (LWR). These factors are crucial for meeting performance, reliability, and yield goals. This study presents a computational fluid dynamics (CFD) model for optimizing Plasma-Enhanced Chemical Vapor …
-
Feedback Control for Electron Beam Lithography
… to increase critical dimension variability and line width roughness and to limit the throughput. It would be an important improvement to e-beam patterning technology if real-time feedback control of electron-dose were provided to improve pattern quality and throughput even beyond the shot noise …
-
Fabrication and nanoroughness characterization of specific nanostructures and nanodevice
Nanoroughness is becoming a very important specification for many nanostructures and nanodevices, and its metrology impacts not only the nanodevice properties of interest, but also its material selection and process development. This Ph.D. thesis presents an investigation into fabrication and …
-
Organic Inorganic Photoresist And Laser Induced Heating Process For Next Generation Lithography
… challenge of achieving required resolution and line width roughness (LWR). Extreme Ultraviolet Lithography (EUVL), using 13.5 nm light, is considered as the likely successor to 193 nm immersion lithography, but has been delayed for years due to both light source and resist materials challenges. …
-
Reduction of Line Edge Roughness (LER) in Interference-Like Large Field Lithography
Line edge roughness (LER) is seen as one of the most crucial challenges to be addressed in advanced technology nodes. In order to alleviate it, several options were explored in this work for the interference-like lithography imaging conditions. The most straight forward option was to scale …
-
Πολυμερικά υλικά και διεργασίες για μικρολιθογραφία σε λεπτά υμένια
… with film thickness. The aspect ratio (height/width) in the lines must be approximately 3:1 so that the fabricated structures do not collapse due to mechanical tension. Thus, film thickness must be in the range of 80-150 nm. One of the most important parameters that contribute significantly to …