Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"Liquid/vapor interface"”.

  1. The structure of the liquid-vapor interface

    … being used to describe the structure of the liquid-vapor interface. The fluids considered are those consisting of "argon-like" molecules, which have radially symmetric potentials. "Wall effects" upon the interface are assumed to be negligible. The derivations of several theories have been …

    ubc Repository record for The structure of the liquid-vapor interface (opens in a new tab) Download PDF for The structure of the liquid-vapor interface (opens in a new tab)

  2. Removal of Bacteria from Solids by Bubbles: Effect of Solid Wettability, Interaction Geometry, and Liquid–Vapor Interface Velocity

    … a bubble collides with a solid, an air–water interface crosses the solid twice, and we were able to distinguish the effects of the first and second air–water interface. The bacterium Pseudomonas aeruginosa was allowed to adhere to smooth polydimethylsiloxane (PDMS) and then a collision with a …

    vt Repository record for Removal of Bacteria from Solids by Bubbles: Effect of Solid Wettability, Interaction Geometry, and Liquid–Vapor Interface Velocity (opens in a new tab)

  3. A Photographic Investigation of Bubble Nucleation from Artificial Cavities

    … .0182 to .0381 inches. The penetration of the liquid-vapor interface into a cavity after bubble departure appeared to be inertia controlled. Cavity interior geometry and cleanliness had a direct effect upon the liquid-vapor interface penetration distance. The depth of penetration of the …

    nps Repository record for A Photographic Investigation of Bubble Nucleation from Artificial Cavities (opens in a new tab)

  4. Numerical Study of Fully Developed Laminar and Turbulent Flow Through Microchannels with Longitudinal Microstructures

    … and the contact area between the flowing liquid and the solid wall is greatly reduced. Further, due to the scale of the micropatterned structures, the liquid is unable to wet the cavity and a liquid meniscus is formed between ribs. This creates a liquid-vapor interface at the cavity …

    byu Repository record for Numerical Study of Fully Developed Laminar and Turbulent Flow Through Microchannels with Longitudinal Microstructures (opens in a new tab) Download PDF for Numerical Study of Fully Developed Laminar and Turbulent Flow Through Microchannels with Longitudinal Microstructures (opens in a new tab)

  5. Evaporation Mass Flux: A Predictive Model and Experiments

    Evaporation is a fundamental and core phenomenon in a broad range of disciplines. Despite its importance, the current theories on evaporation suffer from fitting coefficients with reported values varying in a few orders of magnitude. Lack of a sound model impedes simulation and prediction of …

    houston Repository record for Evaporation Mass Flux: A Predictive Model and Experiments (opens in a new tab)

  6. Acoustic actuation of vapor-liquid interfaces in boiling and condensation processes

    … transfer involving boiling and condensation in a liquid pool is widely used to accommodate high heat fluxes. However, coupling this attractive approach to system-level heat transfer is hampered by the rate-limiting steps of vaporization (inhibited by the critical heat flux limit on the maximum …

    gatech Repository record for Acoustic actuation of vapor-liquid interfaces in boiling and condensation processes (opens in a new tab)

  7. Heat transfer model of the hot rolling runout table-cooling and coil cooling of steel

    … adopts the extrapolation of the "macrolayer evaporation mechanism" into the forced-flow transition boiling regime. The analysis in terms of the nucleation process, fluid flow, liquid-solid contact area, and the liquid-vapor interface instability allow succesful prediction of pilotplant and …

    ubc Repository record for Heat transfer model of the hot rolling runout table-cooling and coil cooling of steel (opens in a new tab) Download PDF for Heat transfer model of the hot rolling runout table-cooling and coil cooling of steel (opens in a new tab)

  8. Contact angle hysteresis and the energy principle

    … or heterogeneity on quasi-static motion of a liquid/vapor/solid contact line. We determine the static stable equilibrium configuration(s) of the liquid/vapor interface in a system by minimizing the sum of the Helmholtz free energy and gravitational potential energy (or the total energy) of the …

    rice Repository record for Contact angle hysteresis and the energy principle (opens in a new tab)

  9. Stratification in Drying Particle Suspensions

    … the structure of the dry film depends on the evaporation rate of the solvent and the initial volume fractions of the nanoparticles. My simulation results show that the particle mixtures stratify according to their sizes when the suspensions are quickly dried, consistent with the prediction of …

    vt Repository record for Stratification in Drying Particle Suspensions (opens in a new tab)

  10. Droplet repellency of microfabricated surfaces in saturated environments

    … apparent contact angles for droplets of various liquids on microstructured surfaces in saturated environments. Micro scale pillar surfaces maintain the non-wetting Cassie-Baxter regime for drops of water over a range of saturation temperatures while micro scale waffles transition into a partially …

    uiuc Repository record for Droplet repellency of microfabricated surfaces in saturated environments (opens in a new tab)

  11. Phenomenological and semi-phenomenological models of nano-particles freezing

    … of the solid phase is completely wet by the liquid and forms in the core of the droplet. However, recent experiments and computer simulations have suggested that some nanoparticles start nucleating at the liquid-vapor interface of the drop in a pseudoheterogeneous process. The goal of the …

    sask Repository record for Phenomenological and semi-phenomenological models of nano-particles freezing (opens in a new tab)

  12. Analysis of Viscous Drag Reduction and Thermal Transport Effects for Microengineered Ultrahydrophobic Surfaces

    … for reducing the frictional resistance to liquid flow in microchannels is the patterning of micro-ribs and cavities on the channel walls. When treated with a hydrophobic coating, the liquid flowing in the microchannel wets only the top surfaces of the ribs, and does not penetrate into the …

    byu Repository record for Analysis of Viscous Drag Reduction and Thermal Transport Effects for Microengineered Ultrahydrophobic Surfaces (opens in a new tab) Download PDF for Analysis of Viscous Drag Reduction and Thermal Transport Effects for Microengineered Ultrahydrophobic Surfaces (opens in a new tab)

  13. A computational analysis of deep penetration laser welding.

    … part of the solution, and a convection-dominated vaporization model was utilized. Deep penetration welding is characterized by the formation of the keyhole. Beyond a certain threshold laser power, the laser beam rapidly evaporates material creating a strong back pressure, which pushes the molten …

    arizona-thes Repository record for A computational analysis of deep penetration laser welding. (opens in a new tab)

  14. Theoretical analysis and experimental investigation of a combined compact evaporative cooler

    Evaporative cooling utilizes the fact that water can absorb a relatively large amount of heat during the evaporation process. When this evaporation process takes place in ambient air, the ambient air temperature can be dropped significantly resulting in the cooling effect. In the current study, …

    missouri Repository record for Theoretical analysis and experimental investigation of a combined compact evaporative cooler (opens in a new tab)

  15. Self-assembly and crystallization of nanomaterials in two and three dimensions

    … anisotropic nanostructure assemblies at the liquid/vapor interface and in the aqueous solution. All the anisotropic AuNPs (AuNRs, AuNTs, and AuNOh) form monolayers at the interface in the presence of high concentrations of salt. 2D ordered superlattices have been explored by X-ray …

    iastate Repository record for Self-assembly and crystallization of nanomaterials in two and three dimensions (opens in a new tab)

  16. Transient axisymmetric model for laser drilling

    … equation for the solid substrate and for the liquid molten part, the thin layer model (TLM) equations are utilized. Boundary element method (BEM) is used for the region encompassing the moving boundary and finite difference method (FDM) is utilized for the remainder. BEM and FDM are coupled …

    arizona-thes Repository record for Transient axisymmetric model for laser drilling (opens in a new tab)

Page 1 of 4