Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Lithium Bromide"”.

  1. The Experimental Analysis of Aqueous Lithium Bromide Vertical Film Absorption

    … of water vapor into a solution of aqueous lithium bromide. The absorber was made of borosilicate glass for visual inspection of the falling film. Experiments were conducted on an internally cooled smooth tube of about 0.019 m outside diameter and of 1.53 m length. Laboratory testing …

    utk-theses Repository record for The Experimental Analysis of Aqueous Lithium Bromide Vertical Film Absorption (opens in a new tab)

  2. Evaluation of a Dual Chamber Vortex Generator for a lithium bromide-water absorption refrigeration system

    … to replace the conventional generator in a lithium bromide-water absorption refrigeration system. The conceptual basis of the DCVG is that a vortical flow would be established inside the DCVG creating a high speed, low pressure region that would augment the separation of refrigerant from the …

    rit Repository record for Evaluation of a Dual Chamber Vortex Generator for a lithium bromide-water absorption refrigeration system (opens in a new tab)

  3. Dynamic simulation of an air cooled lithium bromide-water absorption cooling system operating with solar energy

    … absorption refrigeration system using the water-lithium bromide combination is investigated. The study is oriented towards developing a system which would be able to operate at a relatively low evaporator temperature so that it can be used for air conditioning and refrigeration as well. In …

    carleton Repository record for Dynamic simulation of an air cooled lithium bromide-water absorption cooling system operating with solar energy (opens in a new tab)

  4. Vapor Pressures of Saturated Aqueous Salt Solutions of Selected Inorganic Salts

    … functions of temperature have been measured for lithium bromide, lithium iodide, sodium bromide, potassium hydroxide, cesium fluoride, and zinc bromide. The temperature range is about plus s 0 c. to 70°c., with this range extended from minus 10°c. to plus 105°c. for lithium bromide and restricted …

    maryland Repository record for Vapor Pressures of Saturated Aqueous Salt Solutions of Selected Inorganic Salts (opens in a new tab)

  5. SIMULATION OF ABSORPTION CYCLES FOR INTEGRATION INTO REFINING PROCESSES

    … procedure for single and double effect water/lithium bromide and single effect ammonia/water chillers. Comparison of these models to published modeling results and experimental data shows acceptable agreement, within 5% for the water/lithium bromide models and within 7% for the ammonia/water …

    maryland Repository record for SIMULATION OF ABSORPTION CYCLES FOR INTEGRATION INTO REFINING PROCESSES (opens in a new tab)

  6. The effect of organic and inorganic salt on the relative volatility of non-aqueous systems

    … per cent potassium acetate, 4.5 mole per cent lithium bromide, and 9.0 mole per cent lithium bromide.</p><p>All data were taken at a constant temperature of 60?C. The systems for which a significant number of data points were collected met successfully the area thermodynamic consistency …

    njit Repository record for The effect of organic and inorganic salt on the relative volatility of non-aqueous systems (opens in a new tab)

  7. An experimental study of heat driven absorption cooling systems

    … using the working pairsammonia-water and ammonia-lithium nitrate for cooling, heating and simultaneousheating and cooling. The interaction between the operating parametershas been illustrated graphically.A computer model of the steady state thermodynamics of a heat drivenammonia-water system and …

    salford Download PDF for An experimental study of heat driven absorption cooling systems (opens in a new tab)

  8. Selective Carbon-Carbon Bond Formation Promoted by Divalent Samarium Reagents

    … and pinacol carbocycles products was the use of lithium bromide. This addition of lithium bromide facilitates easy in situ formation of samarium(II) bromide. The Reformatsky-alkylation cyclization was a newly realized reaction employing samarium enolates. Two of the three methods, the …

    denver Repository record for Selective Carbon-Carbon Bond Formation Promoted by Divalent Samarium Reagents (opens in a new tab)

  9. Performance analysis of absorption heat transformer

    … investigate the performance of Ammonia-Water and Lithium Bromide aqueous solutions in a single stage AHT. Comparison will be made between the findings of the two proposed aqueous solutions for the same system and operating parameters to determine the relative merit of each one.

    ttu Repository record for Performance analysis of absorption heat transformer (opens in a new tab)

  10. A Study on the Integration of a Novel Absorption Chiller into a Microscale Combined Cooling, Heating, and Power (Micro-CCHP) System

    … a novel single-effect and double-effect water-lithium bromide absorption chiller that integrates the heat recovery unit and cooling tower of a conventional CCHP system into the chiller’s design, reducing the cost and footprint of the system. The results of the EES model are used to perform heat …

    uno Repository record for A Study on the Integration of a Novel Absorption Chiller into a Microscale Combined Cooling, Heating, and Power (Micro-CCHP) System (opens in a new tab)

  11. Synthesis And Polymerization Of Bifunctional Five-membered Cyclic Dithiocarbonates And Their Use As Stabilizers For Magnetic Nan

    … with carbon disulfide at room temperature with lithium bromide as catalyst. Full characterization of these monomers was performed including elemental analysis, proton and carbon nuclear magnetic resonance (NMR) spectroscopy, gas chromatography-mass spectroscopy, and Fourier transmission infrared …

    ucf Repository record for Synthesis And Polymerization Of Bifunctional Five-membered Cyclic Dithiocarbonates And Their Use As Stabilizers For Magnetic Nan (opens in a new tab)

  12. HIGH-PERFORMANCE ZERO LIQUID DISCHARGE (ZLD) TREATMENT OF HIGH-SALINITY BRINES USING A MULTIPLE-EFFECT ABSORPTION DISTILLATION CONCEPT

    … by strong hygroscopic properties of an aqueous lithium bromide (LiBr) salt. This eliminates the need for energy-intensive electrically-driven mechanical vapor compressors currently employed in advanced brine crystallizers. Comprehensive thermodynamic modeling has been performed to evaluate …

    mtu Repository record for HIGH-PERFORMANCE ZERO LIQUID DISCHARGE (ZLD) TREATMENT OF HIGH-SALINITY BRINES USING A MULTIPLE-EFFECT ABSORPTION DISTILLATION CONCEPT (opens in a new tab)

  13. Thermodynamic analysis of open cycle evaporative cooling systems with liquid desiccant mediums

    … ofthe most common liquid desiccant solutions (Lithium Chloride, Lithium Bromide and Calcium Chloride) is established, followed by the development of the mathematical models for thedehumidifier and regenerator. The developed models concern three different configurations;the adiabatic device with …

    greece Repository record for Thermodynamic analysis of open cycle evaporative cooling systems with liquid desiccant mediums (opens in a new tab)

  14. Ασύρματα συστήματα πολλαπλών κεραιών για επικοινωνίες με επίκεντρο το ανθρώπινο σώμα (Body-centric communications): ανάπτυξη, αξιολόγηση επιδόσεων και μοντελοποίηση

    … ofthe most common liquid desiccant solutions (Lithium Chloride, Lithium Bromide and Calcium Chloride) is established, followed by the development of the mathematical models for thedehumidifier and regenerator. The developed models concern three different configurations;the adiabatic device with …

    greece Repository record for Ασύρματα συστήματα πολλαπλών κεραιών για επικοινωνίες με επίκεντρο το ανθρώπινο σώμα (Body-centric communications): ανάπτυξη, αξιολόγηση επιδόσεων και μοντελοποίηση (opens in a new tab)

  15. Study of the Influence of Different Electrolyte Salts on the Performance of Lithium-Sulfur Batteries

    Lithium-sulfur batteries (LSBs) have advantages of extremely high theoretical specific capacity and energy density, environmental friendliness and low cost, making it one of the top candidates for the next-generation energy storage systems. However, there are still some issues that hinder the …

    waterloo Repository record for Study of the Influence of Different Electrolyte Salts on the Performance of Lithium-Sulfur Batteries (opens in a new tab)

Page 1 of 3