Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 120 for “"Lithium disilicate"”.
-
Stepwise stress testing of different CAD/CAM lithium disilicate veneer application methods to lithium disilicate substructure
… CAD/CAM technology allows fabrication of thin lithium disilicate (LD) veneers to a LD crown substructure in place of using traditional feldspathic porcelain (FP) which has inferior mechanical properties. This project investigated the effect of different LD veneer applications to LD substructure …
-
Development of Lithium Disilicate Microstructure Graded Glass-Ceramic
… processing. The desired glass-ceramic was a lithium disilicate material that has a crystallization gradient across the sample, leading to functionally graded properties as a result of the microstructure gradient. Samples were prepared by melting and pouring glass at 1400°C, annealing at 400°C …
-
Fabrication, Kinetics and Crystallography of Lithium Disilicate Glass-Ceramics
… focuses on three aspects of investigations on lithium disilicate glass-ceramics, namely, fabrication, kinetics, and crystallography. One of the objectives is to fabricate a high-strength glass-ceramic in complex lithium disilicate glass systems for dental restorative applications by means of …
-
Effect of pressure on crystallization in lithium disilicate glass
… degrees C. At a pressure of 4.5 GPa crystal of lithium disilicate crystallizes from the glass while at 6 GPa, the densified glass crystallizes to a new high pressure form of lithium silicate. The crystal growth rate curve shifts to higher temperatures with increasing pressure. Change in the net …
-
Crystallization kinetics of lithium disilicate and sodium silicate glasses
The formation of metastable crystalline phases in lithium disilicate glass has been a subject of controversy for decades. Here, one aspect of this problem relating to the stability of these non-equilibrium phases when glasses are heated for extended time periods in the nucleation regime is …
-
Marginal fit of lithium disilicate crowns : a three-dimensional analysis
Objectives: To compare the marginal fit of lithium disilicate (LDS) crowns fabricated with digital impression and manufacturing (termed “DD”), digital impression and traditional pressed manufacturing (termed “DP”), and traditional impression and manufacturing (termed “TP”). Methods: Tooth #15 was …
-
The fracture mechanics of lithium disilicate glass and glass-ceramics
… examination. The kinetics of crystallization of lithium disilicate from 17.8wt% Li₂0 - 82.2 wt % Si0₂ glass was studied by crystallizing this glass at 530°C for various lengths of time. It was shown that the crystallization of lithium disilicate is a diffusion controlled reaction. It was found …
-
Crystallization of Lithium Disilicate Glass Using Variable Frequency Microwave Processing
The lithium disilicate (LS2) glass system provides the basis for a large number of useful glass-ceramic products. Microwave processing of materials such as glass-ceramics offers unique benefits over conventional processing techniques. Variable frequency microwave (VFM) processing is an advanced …
-
Micro-CT measurement of the internal fit of lithium disilicate crowns
… of this study was to assess the internal fit of lithium disilicate crowns fabricated using this novel impression technology and to compare their fit to the fit of crowns obtained by traditional elastomeric impressions. Thus, 15 lithium disilicate crowns were fabricated using an entirely digital …
-
Treatment of surface contamination of lithium disilicate ceramic before adhesive luting
… regimens on the adhesion of resin cement to lithium disilicate ceramic. Methods: Specimens (IPS e.max CAD) (n =15 per group) were etched with 5% hydrofluoric acid gel. While half of the specimens were silanized after etching, the other half was left etched only. After contamination with …
-
Bonds And Contact Angles Produced With Surface Alterations To Lithium Disilicate
… shear bond strength of a composite to lithium disilicate glass ceramic with a universal single bottle adhesive. A combination of surface treatments of hydrofluoric acid, silane, salivary contamination and subsequent cleaning were also evaluated. Blocks of lithium disilicate (e.max CAD) …
-
Microstructural evolution and physical behavior of a lithium disilicate glass-ceramic
Background: Elucidating the lithium disilicate system like the popular IPS e.max® CAD (LS2), made specifically for Computer-Aided Design and Computer-Aided Manufacturing (CAD-CAM), as a function of temperature unravels new ways to enhance material properties and performance. Objective: To study the …
-
Marginal Fit of Lithium Disilicate Crowns using Three Different Fabrication Techniques
… evaluate the three-dimensional marginal fit of lithium disilicate crowns fabricated by pressed or CAD/CAM milled four- or five-axis machines. The three groups were Pressed, McX and McX5, and differed in their fabrication technique. The Pressed group was fabricated with IPS e.max Press and was …
-
Fracture Strength of PEEK Hybrid Abutment Restored with Lithium Disilicate Crown
… was to compare the fracture strength of single lithium disilicate implant-supported crowns fabricated on two-piece abutments with various materials PEEK, zirconia, and lithium disilicate. Materials and methods: Thirty-six implants (Conical connection, 4.3 in diameter and 10 mm in length; Nobel …
-
Effect Of Cement Selection On Retention Of Zirconia And Lithium Disilicate Crowns
Background: Ceramic crowns (lithium disilicate and zirconia) have become the most prescribed material for the restoration of anterior and posterior teeth due to the esthetic concerns of patients and the high cost of noble alloys. Different types of cements are used for luting crowns such as zinc …
-
Groups VB and VIB oxides as nucleating agents in lithium disilicate glasses
… and induction period in homogeneously-nucleating lithium disilicate glass was made by substituting one and two mole-percent of MoO₃, Nb₂O₅, Ta₂O₅, V₂O₅ or WO₃ for SiO₂, and heat-treating the glasses under identical conditions. The "two-step" method was used, consisting of nucleation for variable …
-
Measuement of Translucency, Biaxial Flexural Strength, and Radiopacity of Different Lithium Disilicate Materials
… radiopacity and microstructure of various lithium disilicate materials used for dental restorations. Materials and Methods: CAD/CAM lithium disilicate glass-ceramic blocks: IPS e.max CAD (Ivoclar Vivadent), CerecTessera (Dentsply Sirona), and Amber Mill (Hassbio America) were used (shade …
-
Fatigue failure load of lithium disilicate restorations cemented on a chairside titanium-base
… To evaluate the fatigue failure load of distinct lithium disilicate restoration designs cemented on a chairside titanium-base (VariobaseTM for CEREC®, Straumann® LLC, USA) for restoring anterior implant restoration. MATERIALS AND METHODS: Left maxillary incisor restoration was virtually designed …
-
Cutting Efficiency of Diamond Burs on Yttria-Stabilized Zirconia and Lithium Disilicate Ingots
… and material lost after cutting compared to a Lithium Disilicate control. Forty six cuts of each material were made in a custom test device that held the handpiece in a fixed position and moved the sample toward the cutting bur. Measurement of time, temperature change and weight loss were made …
Page 1 of 6