Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 84 for “"Lithography--Technique"”.
-
Line search based inverse lithography technique for mask design
… moore's law, microelectronic fabrication techniques have been developed to fabricate deep-submicron devices. Device feature size on wafer turns to be much smaller than the illumination source of nowadays widely used lithography equipments, which is 193 nm wavelength of UV(ultraviolet) …
-
Biosensing based on localized surface plasmon resonance of gold nanostructures fabricated by a novel nanosphere lithography technique
… were prepared through a modified nanosphere lithography method. The structures, obtained by self-assembly of polystyrene microspheres and gold colloids in multilayers and subsequent removal of polystyrene, consist of nanohole/nanorings, distributed uniformly among gold nanoparticles on a …
-
The Fabrication and Applications of Protein Patterns Produced Via Particle Lithography
A novel particle lithography technique with the ability to pattern protein in hexagonal dot arrays was developed. The patterning method consists of a simple three-step procedure: (1) formation of a close-packed polystyrene microsphere monolayer, (2) grafting of a protein-resistant layer of …
-
Polymer-derived Ceramics: Electronic Properties And Application
… MEMS for harsh environmental applications with a lithography technique. The cure depth of the polymer precursor was measured as a function of UV intensity and exposure time. The experimental data was compared with the available theoretical model. A few typical SiCN parts were fabricated by …
-
Nanomaterial based biosensor powered by solar cell
… flexible all-polymer DSSCs. A low-cost shrink lithography technique with 21 nm resolution to support the nanostructure fabrication of biosensor and solar cell in a low-cost way. By using this novel lithography technique, a biosensor based on suspended graphene nanoribbon with only 50 nm width …
-
Surface Patterning, Electronic Device Fabrication And, Three-Dimensional Self-Assembly Using Polydimethylsiloxane
A masterless decal transfer lithography technique is herein described for pattering with polydimethylsiloxane (PDMS). This procedure uses a novel ultraviolet zone (UVO) exposure mask, which allows for the photopatterning of UVO modifications of PDMS surfaces. This modification enables the direct …
-
Fabrication of polyacrylamide micro-pillars and its application in microarray analysis
… a pada?? approach was developed. Using a soft lithography technique, an array of a??wafflea??-like micro-pillars embedded on the surface of the glass slide substratum was fabricated. The micro-pillar based microarray showed more than a 3-fold increase in the effective surface area available for …
-
CHARACTERIZATION OF MAGNETIC NANOSTRUCTURES CREATED BY STEPWISE NANOSPHERE LITHOGRAPHY
… challenges. The current nanofabrication techniques such as e-beam lithography technique, nanoimprint and EVU lithography are greatly restricted by process related limitations including the stringent alignment requirement at nanoscales, complex fabrication procedures, high-cost and long …
-
Fabrication and Characterisation of III-Nitride based Nanostructure Devices using Nanosphere Lithography Techniques
… silicon substrates. A cost effective nanosphere lithography technique has been employed for the fabrication of a number of nano structures such as nanorod arrays, nanoholes arrays; and single micro-disk lasers. Photonic crystal structures based on nanohole arrays have been designed and then …
-
3D photonic bandgap materials fabricated self-assembled colloidal microspheres as the template
… crystal heterostructures. Using the nanosphere lithography method, various surface patterns on substrates were explored. The patterns were employed as the masks to fabricate ordered nanopits on the substrates. Importantly, insertion of artificial defects in the interior of a 3D photonic crystal …
-
Metamaterials for sensing and slow light applications
… (HAS-SRRs) using proton beam writing, a lithography technique capable of fabricating highly orthogonal microstructures with heights in the ten-micrometer range. We demonstrated experimentally that HAS-SRRs offered considerable advantages for sensing applications. HAS-SRRs offer increased …
-
DEVELOPMENT OF PLASMONIC NANOSTRUCTURES FOR BIOLOGICAL SENSING
… sensing applications by laser interference lithography technique which can greatly improve the fabrication flexibility, tune LSPR over a wide range of wavelength and facilitate the design of novel biosensors which are based on LSPR. The optical properties of various 2D fabricated plasmonic …
-
Perylenebis(dicarboximide)-based Chromonic Mesogens for the Fabrication of Micro- and Nanopatterned Materials
… nm in width were also generated from the soft lithography technique and analyzed by scanning electron microscopy. This fabricated pattern with nanoline features has potential applications as semiconducting and photoconducting nanowires in electronic devices.
-
Three dimensional conductivity modulation in biocompatibly functionalized nano-engineered structures
… For this purpose, direct write e-beam lithography technique is used to print a dot array on 950k PMMA C7 resist and the nickel dots obtained after lift-off are used as an etch mask to etch into silicon to realize the nanopillar array. A number of experiments are conducted to optimize …
-
Análise experimental de micromisturador tipo herringbone utilizando a técnica de fluorescência induzida por laser
… Laser-Induced Fluorescence (-LIF) measurement technique was used to measure the flow concentration fields. The fabrication of the microdevices was made in polydimethylsiloxane (PDMS) by the soft-lithography technique combined with the lowcost fabrication of the molds in polymethyl-methacrylate …
-
Fabrication and characterization of a double torsional mechanical oscillator and its applications in gold micromass measurements
… Using a series of semiconductor manufacturing techniques, especially using the electron-beam lithography technique, we successfully micro-fabricate double torsional mechanical oscillators from silicon-on-insulator wafers. We conduct characterization experiments to extract important parameters …
-
Reliability and reproducibility of Josephson junction fabrication - Steps towards an optimized process
… with varying sizes using the cross-type lithography technique. Room temperature resistance measurements on thousands of junctions showed a standard deviation varying from 0.8% and 5.5% depending on the junction size, and a fabrication yield higher than 97%. Additionally, we investigated …
-
Additive Lithography Fabrication And Integration Of Micro Optics
… easily fabricated using grinding and polishing techniques, but few methods exist for inexpensive fabrication of micro optical elements. In this work we present an innovative technique termed Additive Lithography that makes use of binary masks and controlled partial exposures to sculpt …
-
ASSEMBLY OF SILVER NANOCUBE CLUSTERS AND TUNING OF SURFACE PLASMON RESONANCES FOR SURFACE-ENHANCED RAMAN SCATTERING
… The BCPTD does not require the use of any lithography technique. By means of these three deposition methods, metal nanoparticles, including silver nanocubes and gold nanospheres, were positioned at pre-determined substrate sites. Various parameters, such as angle between cluster axis and …
-
Fabrication of Single Nanowire Device using Electron Beam Lithography
… easily processed using standard microfabrication techniques. Therefore, electron beam lithography integrated with photolithography technique has been used to manipulate the connection; which provides I-V characteristics, of single horizontal nanowire with a specific device. Single Si nanowire …
Page 1 of 5