Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Load Matching"”.
-
24x7 load matching with wind, solar photovoltaic, and battery storage power plants
… (BESS) to provide competitively priced 24x7 load-matched power in Texas, where these technologies comprise 95% of the power plant queue seeking to interconnect to the Electric Reliability Council of Texas (ERCOT) grid. The first stage of analysis develops a linear program that identifies …
-
A prototype design and performance of the Savonius rotor based irrigation system
… and bearing assemblies; braking system and a load matching concept. Described towards the end are the field test arrangements of the prototype and associated instrumentation. Even according to the most conservative estimate, the prototype tests suggest that the windmill should be able to …
-
Power-amplifier optimization using tunable circuitry and stability analysis methods for the next generation radar.
… tuning algorithms for optimizing the load reflection coefficient presented to a transistor by novel tunable circuitry. The algorithms are implemented on systems using a varactor diode network and a high-power handling evanescent mode cavity tuner as the tunable load matching networks. …
-
The Development of a Phase Locked Wind Turbine Blade Finite Element Model to Predict Loads and Deflections During Fatigue Testing
… systems. These systems do not allow for the load phase angle to be controlled, and the maximum load application in the edge and flap directions are allowed to vary. The PhLEX (Phase Locked Excitation System) under development utilizes a resonant excitation system in order to reduce hydraulic …
-
Wireless power and data transmission to high-performance implantable medical devices
… and a Q-modulated inductive link for automatic load matching. In wireless data transfer, the contributions are the development of a new modulation technique called pulse-delay modulation for low-power and wideband near-field data communication and a pulse-width-modulation impulse-radio …
-
Development of organic thermoelectric materials and devices for energy harvesting
… the TEG was divided into sub-modules for load matching to different applications, thereby eliminating the need for power conditioning circuits. These developments enable low cost thermoelectric applications for polymers such as waste heat recovery from pipes, and wearable electronics …
-
Electrical performance and economic feasibility analyses of hybrid and battery storage devices used in remote area islanded renewable energy systems
… each case being connected to a BSS and HBS. A load profile and solar and wind resource investigation was conducted using the NASA, Wind Atlas of South Africa (WASA) and Solar GIS database. Electrical cases were modelled in Matlab and evaluated in terms of power security, load matching, power …
-
Dynamic coupling of air culvert air conditioning hybrid cooling system in buildings
… system regardless of climate type, with cooling load matching in excess of 85% keeping indoor resultant temperatures within comfort threshold limits. The project conclusion is that a culvert may be deployed in a manner that allows significant down-sizing of conventional cooling plant, thereby …
-
Integrated Modelling and Analysis of a Heat Pump BIPV/T System with Thermal Storage for Load Shifting
… energy storage as a means of decoupling the loads from the source is proposed with the objective of shifting thermal loads and electrical peak demand so that they are outside the peak demand periods for the grid. A model was developed and a case study of a residential net-zero energy solar …
-
A multiband inductive wireless link for implantable medical devices and small freely behaving animal subjects
… for multi-coil link, which can provide optimal load matching for maximum PTE. 7. Design of the wireless power and data communication system for long-term animal experiments, without interruption, on freely behaving small animal subjects in any shape of experimental arenas.
-
A Low Phase Noise K-band Oscillator Utilizing An Embedded Dielectric Resonator On Multilayer High Frequency Laminates
… resonator termination network, and a passive load matching network. The termination network embodies a cylindrical high permittivity dielectric resonator that is coupled on the same plane as a current carrying transmission line. This configuration provides an adequate resonance needed for …
-
Compressor stability management
… the correlation measure decreases as compressor loading is increased. Moreover, sharp drops in this measure have been found to be relevant for stability limit detection. The significance of these drops can be captured by tracking events generated by the downward crossing of a selected threshold …
-
Neural-Network and Fuzzy-Logic Learning and Control of Linear and Nonlinear Dynamic Systems
… applications. The first strategy is based on a load-matching procedure, which seeks to adjust the controller in order to counteract the loads (forces and moments) which generate the motion that is to be reduced. A second training strategy provides training by means of an adaptive gradient …
-
Energy Harvesting from Hydraulic and Vibration Sources
… divided in two main parts. The former is about load optimisation for a hydraulic energy harvester while the latter focuses on the design and fabrication of piezoelectric energy harvesters for the single supply pre-biasing circuit. An abstract for each part is reported below: Part I: The …
-
Tuning Techniques for Microwave Devices Based on Space Mapping and Surrogate Modeling
… production, and develop methods for real-time load matching. This work proposes two methods for post-fabrication tuning of microwave bandpass filters. The first method uses the space mapping technique and sensitivity analysis. It is applied to tune a varactor-tuned microstrip filter fabricated …
-
Performance and Evaluation of a Variable-Speed Darrieus Wind Turbine
… in limiting vibrations and rotational speeds. Load matching to maintain optimal performance may also be difficult. Therefore, research was initiated to design, construct and test a variable-speed cantilevered Darrieus for agricultural applications. The principal objectives were: (1) Design a …
-
Synthesis and processing of materials for direct thermal-to-electric energy conversion and storage
… concentrated solar for thermoelectric devices, load matching is difficult or impossible and an energy storage technology is needed in addition to the energy conversion technology. This increases the overall cost and complexity of the systems since two devices are required and represents a …
-
Maximizing efficiency of solar energy harvesting systems supplying a microgrid using an embedded system
… by implementing the maximum power theorem for load matching using the relationship between input and output impedances. To achieve this objective, the popular MPPT Perturb-and-Observe (P&O) technique is used as a test bench. This is followed by the development of a novel intelligent method …
-
Prediction of power and energy use in dwellings : Addressing apects of thermal mass and occupant behaviour
… leads to an uncertain situation with regard to matching the renewable production and demand, and even more so when the occupants’ behaviour is subject to temporal variations. In addition to the temporal variations, occupant actions or preferences are subject to large stochastic variations within …
-
Inkjet-printed broadband energy harvesters, rectifiers for 5G and IoT applications featuring broad range matching capabilities
… will be addressed by designing a good impedance matching network between the antenna and the load. Matching circuits also come into picture, as due to the presence of large input signal, the rectifier can operate in different regions, which can result in impedance variation leading to variable …
Page 1 of 2