Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 123 for “"Load following"”.

  1. ANALYSIS OF AUTONOMOUS LOAD FOLLOWING (ALF) IN ADVANCED FAST REACTORS

    The autonomous load following (ALF) properties of fast-spectrum nuclear reactors offer great potential for increased electric grid stability, reduction in control rod mechanism wear, and less operator action for small power transients experienced on a daily basis. These features can result in …

    nps Repository record for ANALYSIS OF AUTONOMOUS LOAD FOLLOWING (ALF) IN ADVANCED FAST REACTORS (opens in a new tab)

  2. Modelling an Electricity System with Load Following Nuclear Power Plants

    … developed for this purpose. The power limits for load following nuclear power plants (NPPs) were investigated and were thereafter used as input to the model. Acquired data for wind and hydro power were also put into the model to model the electricity system of southern Sweden. When modelling load …

    chalmers Repository record for Modelling an Electricity System with Load Following Nuclear Power Plants (opens in a new tab)

  3. Quantifying the Impact of Load-Following on Gas-fired Power Plants

    … power plants are being forced to cycle their loads more frequently and rapidly than for which they were designed. However, the impact of load-following operation on plant efficiency and equipment health are currently poorly understood. The objective of this work is to quantify the impact of …

    wvu Repository record for Quantifying the Impact of Load-Following on Gas-fired Power Plants (opens in a new tab)

  4. Model based predictive control for load following of a pressurised water reactor

    … common for nuclear reactors to be operated as load following units, and not base load units as they are more commonly being operated. Therefore a need exists to study and develop new strategies and technologies to improve the automatic load following capabilities of reactors. PWR power plants …

    nwu-za Repository record for Model based predictive control for load following of a pressurised water reactor (opens in a new tab)

  5. Two impacts of wind penetration: Transient frequency response and load following requirements

    … based on one year wind data. Second, combined load-wind variability is calculated with respect to three time scales: hour to hour, ten-minute to ten-minute, and one-minute to one-minute. Operational suggestions are provided in terms of operation services such as scheduling, load following, and …

    iastate Repository record for Two impacts of wind penetration: Transient frequency response and load following requirements (opens in a new tab)

  6. Development and evaluation of Nuclear-Renewable Hybrid Energy System simulator with load following

    … Hybrid Energy Systems (N-RHES) with a focus on Load Following (LF) capabilities. The primary aim is to enhance the operational flexibility of nuclear reactors to adapt to dynamic power demands. A dynamic simulation tool was developed for different nuclear reactor technologies, including …

    uoit Repository record for Development and evaluation of Nuclear-Renewable Hybrid Energy System simulator with load following (opens in a new tab)

  7. Coupled nuclear reactor thermal energy storage system for enhanced load following operation, A

    Nuclear power plants usually provide base-load electric power and operate most economically at a constant power level. In an energy grid with a high fraction of renewable energy sources, future nuclear reactors may be subject to significantly variable power demands. These variable power demands can …

    colo-mines Repository record for Coupled nuclear reactor thermal energy storage system for enhanced load following operation, A (opens in a new tab)

  8. A thermo-hydraulic model of the inventory control system for load following in the PBMR

    … a storage facility whose function is to perform load following through helium mass transfer to and from the PBMR p e r cycle. This mass transfer generally uses pressure differential as the driving force. With a view to minimize the storage volume of the ICS, and hence improve the economics of the …

    nwu-za Repository record for A thermo-hydraulic model of the inventory control system for load following in the PBMR (opens in a new tab)

  9. A Controllability Study of TRUMOX Fuel for Load Following Operation in a CANDU-900 Reactor

    … of this thesis is to provide insight into the load following capabilities of the CANDU-900 reactor design for a transuranic mixed oxide (TRUMOX) fueled core.</p> <p>The three-dimensional fuel management code, RFSP-IST, was used to simulate a reactor operating history for week long load …

    mcmaster Repository record for A Controllability Study of TRUMOX Fuel for Load Following Operation in a CANDU-900 Reactor (opens in a new tab)

  10. Analysis of PCI failure risk and modelling hoop stress during load following maneuvers in pressurized water reactors

    … be some advantages for operators to engage in load following maneuvers, in which the reactor power is lowered at some time into the cycle and remains low for a set amount of time before returning to full power. These load following maneuvers create additional power ramp events that could pose …

    texas Repository record for Analysis of PCI failure risk and modelling hoop stress during load following maneuvers in pressurized water reactors (opens in a new tab)

  11. Wind-turbine generator for load-following and its applications to primary frequency support and small-signal stability improvement.

    … a novel active power control strategy named load-following has been given attention recently. Conventionally, variable speed wind-turbine generators (WTGs) are controlled to work at the maximum power extraction point. However, the load-following method allows the WTGs to be de-loaded and …

    baylor Repository record for Wind-turbine generator for load-following and its applications to primary frequency support and small-signal stability improvement. (opens in a new tab)

  12. Development of a Dynamic Model and Control System for Load-Following Operation of Supercritical Pulverized Coal Power Plants

    … rated capacity are being forced to cycle their load and operate under low-load condition to meet changing load demands due to the increased penetration of renewables into the electric grid. The rapid load-following operation is leading to challenging control problems. The goal of this research …

    wvu Repository record for Development of a Dynamic Model and Control System for Load-Following Operation of Supercritical Pulverized Coal Power Plants (opens in a new tab)

  13. Neutronics and thermal-hydraulics analysis of transatomic power molten salt reactor (TAP MSR) core under load following operations

    … Power Molten Salt Reactor (TAP MSR) core under load-following operations using a Monte Carlo code, Serpent 2, as well as a UIUC-developed MOOSE-based code, Moltres. A simulation method was developed to determine the operational bounds of the TAP MSR core and its transient behavior under rapid …

    uiuc Repository record for Neutronics and thermal-hydraulics analysis of transatomic power molten salt reactor (TAP MSR) core under load following operations (opens in a new tab)

  14. Load-following heat, hot water and power distributed generation using an integrated solid oxide fuel cell, compressed air energy storage and solar panel array system.

    … SOFC/CAES system to follow the power and heat loads demanded by the building, and evaluates its performance with an assortment of metrics, including efficiencies, CO2 emissions and grid-independence. The SOFC/CAES system was investigated for the new ExCEL building at McMaster University. It was …

    mcmaster Repository record for Load-following heat, hot water and power distributed generation using an integrated solid oxide fuel cell, compressed air energy storage and solar panel array system. (opens in a new tab)

  15. Dynamic modeling, model-based control, and optimization of solid oxide fuel cells

    … should demonstrate improved cell lifetime and load-following capability. This work seeks to improve lifetime through dynamic analysis of critical lifetime variables and advanced control algorithms that permit load-following while remaining in a safe operating zone based on stress analysis. …

    texas Repository record for Dynamic modeling, model-based control, and optimization of solid oxide fuel cells (opens in a new tab)

  16. Sensitivity of Integral Reactor Configurations to Parametric Fluctuations

    … nuclear power plant operations, such as base-load and load-following modes. A range of operational parameters have been explored such as normalized power levels of 100%, 75%, 50%, and 25% in transients for 6, 12, 24, 48, and 72 hours. The reactor transient performance shows that the …

    tamu Repository record for Sensitivity of Integral Reactor Configurations to Parametric Fluctuations (opens in a new tab)

  17. Component Monitoring Strategies for iPWR Plant Systems during Operational Transients

    … of the SMR design is the increased ability to load-follow to meet the constant changes in grid demand. This type of operational strategy introduces changes into the system that impacts the operational lifespan of system components due to increased degradation. Since there are no current SMR …

    ut-knoxville Repository record for Component Monitoring Strategies for iPWR Plant Systems during Operational Transients (opens in a new tab)

  18. A Lagrangian based nonlinear closed loop control algorithm : application to the advanced liquid metal reactor

    … has the capabilities to perform on line load following, plant state estimations, and the ability to treat unmeasurable plant parameters as uncertain parts in the controller model while taking into account the effects of the control mechanism response function on the generated control …

    utk-theses Repository record for A Lagrangian based nonlinear closed loop control algorithm : application to the advanced liquid metal reactor (opens in a new tab)

  19. Design and simulation of supercritical carbon dioxide recompression Brayton cycles with regenerators for recuperation

    … reduce the magnitude of these fluctuations. Part-load and load-following analysis finds that regenerators perform as well as traditional recuperators in load-following scenarios. Optimization of a 100 MWe regenerator-equipped sCO2 cycle for CSP finds that the potential economic benefit of …

    colo-mines Repository record for Design and simulation of supercritical carbon dioxide recompression Brayton cycles with regenerators for recuperation (opens in a new tab)

  20. Physically based dynamic modeling of planar anode-supported SOFC cogeneration systems

    … is important to determine the potential load-following ability of SOFC systems. One of the goals of this research is to identify the required level of fidelity necessary for a dynamic SOFC system-level simulation tool. The channel-level steady-state simulation and dynamic response to step …

    colo-mines Repository record for Physically based dynamic modeling of planar anode-supported SOFC cogeneration systems (opens in a new tab)

Page 1 of 7