Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Load interaction"”.

  1. Characterizing Aircraft Multiple Wheel Load Interaction for Airport Flexible Pavement Design

    "Procedure 2 (""Engineering Approach""). Average Layer Moduli values obtained from SW non-linear axisymmetric FE analysis are input into an ELP to solve responses for the MW assembly."

    uiuc Repository record for Characterizing Aircraft Multiple Wheel Load Interaction for Airport Flexible Pavement Design (opens in a new tab)

  2. Dynamic behavior of operational wind turbines considering aerodynamic and seismic load interaction

    … perform coupled simulations of wind and seismic loads, a seismic module has been developed for the publicly available National Renewable Energy Laboratory (NREL) code, FAST, at the first step of this research. This achievement allows engineers working in this industry to directly consider …

    must-thes Repository record for Dynamic behavior of operational wind turbines considering aerodynamic and seismic load interaction (opens in a new tab)

  3. Strength model and design methods for bending and axial load interaction in timber members

    … in bending, and in combined bending and axial loading, on the basis of axial tension and compression behaviour of similar members. Both instability and material strength failures are included. The model is based on a stress-strain relationship which incorporates ductile non-linear behaviour in …

    ubc Repository record for Strength model and design methods for bending and axial load interaction in timber members (opens in a new tab) Download PDF for Strength model and design methods for bending and axial load interaction in timber members (opens in a new tab)

  4. Fatigue growth of surface flaws in finite plates under two level block loading

    … flaws subjected to simple variable amplitude loading. The experimental results were used to examine a method of mathematically modeling crack propagation behavior to enhance predictive capability. The mathematical modeling consisted of using the crack closure concept in order to account for …

    missouri Repository record for Fatigue growth of surface flaws in finite plates under two level block loading (opens in a new tab)

  5. Thermo-mechanical fatigue crack growth modeling of a nickel-based superalloy

    … crack growth rates under typical engine spectrum loading conditions. This model serves as both a crack growth analysis tool to determine residual lifetime of ageing turbine components and as a design tool to assess the effects of temperature and loading variables on crack propagation. The material …

    gatech Repository record for Thermo-mechanical fatigue crack growth modeling of a nickel-based superalloy (opens in a new tab)

  6. Thermo-mechanical fatigue crack growth of a polycrystalline superalloy

    A study was done to determine the temperature and load interaction effects on the fatigue crack growth rate of polycrystalline superalloy IN100. Temperature interaction testing was performed by cycling between 316°C and 649°C in blocks of 1, 10 and 100 cycles. Load interaction testing in the form …

    gatech Repository record for Thermo-mechanical fatigue crack growth of a polycrystalline superalloy (opens in a new tab)

  7. Three-Dimensional Finite Element Analysis of Multilayered Systems: Comprehensive Nonlinear Analysis of Rigid Airport Pavement Systems

    … domain size and localized multiple pressure loads, efficient mesh construction and load discretization are very important issues in the structural modeling of airport pavement systems. This dissertation covers (1) the characterization of airport pavement systems, (2) the construction of …

    uiuc Repository record for Three-Dimensional Finite Element Analysis of Multilayered Systems: Comprehensive Nonlinear Analysis of Rigid Airport Pavement Systems (opens in a new tab)

  8. Ultimate capacity of suction caisson in normally and lightly overconsolidated clays

    … ratios of 2, 4, 6 & 8. Normalized failure load interaction diagrams are generated for each of the cases. The location of optimum attachment point is also reported for each of the cases. General purpose finite element computer program ABAQUS is used for the numerical prediction. The finite …

    tamu Repository record for Ultimate capacity of suction caisson in normally and lightly overconsolidated clays (opens in a new tab)

  9. Characterization and modeling of thermo-mechanical fatigue crack growth in a single crystal superalloy

    … would be predicted from isothermal/constant load amplitude results. A thorough understanding of the thermo-mechanical fatigue crack behavior in single crystal superalloys is crucial to accurately evaluate component life to ensure reliable operations without blade fracture through the use of …

    gatech Repository record for Characterization and modeling of thermo-mechanical fatigue crack growth in a single crystal superalloy (opens in a new tab)

  10. Stability of a reticulated dome under multiple independent loads

    … is to investigate stability boundaries, or load interaction curves, of a reticulated dome. An elastic, geometrically nonlinear model with 21 degrees of freedom is considered. The nonlinear response of the model to imposed loads is determined using two separate computer programs as a check on …

    vt Repository record for Stability of a reticulated dome under multiple independent loads (opens in a new tab)

  11. Elastic-Plastic Fatigue Crack Growth Analysis under Variable Amplitude Loading Spectra

    … In the case of cyclic constant amplitude loading the fatigue crack growth depends only on the crack, the component geometry and the applied loading. In the case of variable amplitude loading it also depends on the preceding cyclic loading history. Various types of load sequence (overloads, …

    waterloo Repository record for Elastic-Plastic Fatigue Crack Growth Analysis under Variable Amplitude Loading Spectra (opens in a new tab)

  12. The Effects of Programme Loading on Fatigue Crack Propagation

    … to find and evaluate the effects of programme loading on fatigue crack propagation in EN24 steel. A potential drop technique was developed to measure very small changes in the crack length. The constant load amplitude test results, analysed on the basis of fracture mechanics, served as a basis …

    aston Repository record for The Effects of Programme Loading on Fatigue Crack Propagation (opens in a new tab) Download PDF for The Effects of Programme Loading on Fatigue Crack Propagation (opens in a new tab)

  13. Structural performance of cold-formed steel wall systems incorporating sustainable composite sheathing

    … behaviour of these systems is governed by the interaction between thin-walled steel framing, sheathing materials and mechanical fasteners. In recent years, sustainable composite boards manufactured from recycled packaging and plastics—commercially available in New Zealand under the name …

    waikato-masters Repository record for Structural performance of cold-formed steel wall systems incorporating sustainable composite sheathing (opens in a new tab) Download file for Structural performance of cold-formed steel wall systems incorporating sustainable composite sheathing (opens in a new tab)

  14. Modelling and Identification of Interaction Effects for Stability Analysis in LVDC Power Networks

    … to oscillations from small disturbances due to interactions occurring between sources and loads — power electronic converters, with their tight regulation, introduce a negative impedance characteristic that may destabilize poorly damped oscillatory modes of the network. Recent evidence of the …

    whiterose Download PDF for Modelling and Identification of Interaction Effects for Stability Analysis in LVDC Power Networks (opens in a new tab)

  15. Structural Performance of Sandwich Concrete Walls including UHPC and GFRP Reinforcement under Bending and Axial Loads

    … out-of-plane bending (M) with and without axial loading (N) applied to one wythe to simulate both architectural and load-bearing walls. The study compared steel and PVA fibers in the UHPC, and examined GFRP reinforcement ratio in the wythes, insulation thickness, amount and configurations of GFRP …

    queens Repository record for Structural Performance of Sandwich Concrete Walls including UHPC and GFRP Reinforcement under Bending and Axial Loads (opens in a new tab)

  16. Interaction of Clay Wash Load With Gravel Beds

    This study focuses on the interaction of wash load particles with gravel bed rivers. The effects of excess fine sediment loading to streams on general water quality, contaminant transport, and benthic organism mortality has been well examined. A fundamental assumption in fluvial geomorphology and …

    vt Repository record for Interaction of Clay Wash Load With Gravel Beds (opens in a new tab)

  17. Development of a Two-Parameter Model (Kmax, ΔK) for Fatigue Crack Growth Analysis

    … crack growth under simple variable amplitude loading histories. Moreover, the influence of the applied compressive stress on fatigue crack growth can be explained with the proposed two-parameter model. A two-parameter driving force in the form of: Δκ = K<sub>max,tot</sub><sup>p</sup> …

    waterloo Repository record for Development of a Two-Parameter Model (Kmax, ΔK) for Fatigue Crack Growth Analysis (opens in a new tab)