Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 105 for “"Load ratio"”.
-
The Effects of Load Ratio on Threshold Fatigue Crack Growth of Aluminum Alloys
… cracks can grow to failure under fatigue loading, called fatigue crack growth (FCG). Because it is impossible or impractical to prevent subcritical crack growth in most applications, a damage tolerant design philosophy was developed for crack sensitive structures. Design engineers have …
-
Experimental investigation on the dynamics of inflatable dams
… membranes are predominantly studied. Load combinations are considered without any water, with impounding water, and with water overflow. The two major experimental variables are the dam's internal pressure and the stream's flow rate or the impounded water height. The existence of …
-
NUMERICAL STUDY OF AXIAL LOAD EFFECT ON THE SEISMIC BEHAVIOR OF SHEAR LINKS IN ECCENTRICALLY BRACED FRAMES
… of shear links is of interest. High axial load is one of the key parameters which affect hysteretic behavior of shear links because premature flange local buckling might occur and results in deterioration in shear capacity, ductility, and energy dissipation of the links. The effect of high …
-
Development of a high throughput biofilm formation assay for microbial fuel cell performance screening
… by refining various components and operational parameters. This research is often labour intensive, time consuming and costly. This thesis aims to expedite MFC research through the development of a high-throughput biofilm formation assay tailored for MFC performance screening. The …
-
Seismic Behavior of concrete filled steel Tubular Built-up columns
… adopted in structural members with larger load eccentricity ratio and slenderness ratio, such as stadium, industrial buildings, bridge pier and pillar, and electrical transmission tower. However, the research is mainly focused on static performance, seldom research has been reported on the …
-
Fatigue crack growth in ceramics containing a viscous grain boundary phase at elevated temperatures
… composite was examined under tensile static loading (static fatigue) and tension-tension cyclic loading (cyclic fatigue). The study was carried out at temperatures of 700-900$\sp\circ$C, where the vitreous grain boundary phase flowed viscously. Experimental results have shown the existence of …
-
Computer modeling of the energy performance of screw chillers
… chillers at off-design conditions under full load; however at part load regime, screw chillers perform completely different from centrifugal chillers. It was observed that unlike the centrifugal chillers, the screw chillers have the best performance at part load ratio about 0.7, and at low …
-
Evaluation of dry blending for infant formula manufacture : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology at Massey University
… was blended with WMP or BP to achieve a target ratio 50:50 in both an experimental ribbon blender and a pilot ribbon blender. Using Response Surface Methodology, load ratio and mixing time but not rotation speed were found to have significant effects on the homogeneity with the experimental …
-
ENERGY CONSERVATION AND MANAGEMENT OF BUILDING SERVICES SYSTEMS
… of the total electricity requirement for the operation of typical buildings. It has played a positive role for economic development especially in warm and humid climates like Singapore. Most of the existing buildings have oversized equipment and 99% of the time are not operating at the peak. …
-
Mode-I fatigue fracture of interface for fiber -reinforced polymer composite bonded to wood
… bonded interfaces under static and environmental loads have been explored extensively at WVU, and as an extension of this effort, present study will examine, for the first time, the fatigue behavior of FRP-wood bonded interfaces.;The objective of this study is to develop a combined analytical and …
-
Fire Performance of Hybrid Timber Connections
… used and each connection was tested for three load ratios 30%, 60% and 100%.Test results showed that the Seated connection without a bolt outperformed the Exposed and Concealed connections. It was noticed that at 100% load ratio the failure times for all connections were less than 40 minutes. …
-
Fatigue crack growth in hydrogen pipeline steels
… are carried out for a variety of API steels at load ratios for a given initial crack depth. The load ratio R equals where and are respectively the minimum and maximum stress intensity factors in a pressure cycle the crack experiences due to the pressure fluctuations. In particular for API X42 …
-
Comparison of SLR predictions to monitored performance of six Virginia passive solar houses
… fuel used. Predictions were made using the Solar Load Ratio (SLR) method for the expected use of auxiliary heating fuel. Comparisons were then made between actual performance and predicted performance. The SLR method is used for predictions because it is a widely used tool in the design of passive …
-
An experimental investigation into the fatigue life of glass fibre in an epoxy matrix
… the raw fibre, fibre orientation, resin to fibre ratio as well as various other factors. When one or more of these aspects are altered, the material, mechanical and fatigue properties change. A combination of all of these aspects constitutes a new unique material as such. Because of the complex …
-
A Quantitative Study of Robustness Characteristics in Steel Framed Structures
… building's inherent structural ability to resist loads other than those anticipated during design. Examples of unanticipated loads are damage to a column or beam due to impact; damage due to the concussion of a blast; strength reduction due to extreme heat during a fire; and localized accidental …
-
Development and application of a multicriteria decision support framework for planning or retrofitting district heating systems
… systems with gas-fired boilers for peak heating load compensation have several advantages compared to traditional DH systems. They have a relatively high level of energy and environmental efficiency. However, there is a lack of a decision support system aiding in the planning or retrofitting of …
-
Performance Assessment of RC Columns Under Near-Field Blast Loading Using CFD Modelling
… concrete columns under near-field blast loads, specifically for scaled distances less than 0.4 m/kg1/3. The computational fluid dynamics analysis method in LS-DYNA is used to model the detonation process of the explosive, the propagation of the blast wave, and its interaction with the …
-
Fatigue Crack Growth Threshold in an Al-Si-Cu Die Cast Alloy and the Effect of Strontium Modification
… compared to an unmodified alloy, under high load ratio testing.
-
Monotonic and cyclic pullout resistance of geosynthetics
… interface strength for different types of loading is important to the design of any anchorage detail of a reinforced soil structure or membrane-lined waste containment facility. The imposed loadings may be classified as static, repeated non-dynamic or cyclic, and dynamic. The test method …
Page 1 of 6