Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Load sequence"”.

  1. Evaluation of the Multiple Load Sequence methodology for GFRP fatigue life prediction

    … a certain amount of Variable Amplitude (VA) load sequences could be exchanged with Constant Amplitude (CA) load sequences to determine the fatigue life of composite sailplane structures at an accelerated rate. The proposed methods are uncertain about the correlation between CA and VA load …

    nwu-za Repository record for Evaluation of the Multiple Load Sequence methodology for GFRP fatigue life prediction (opens in a new tab)

  2. Fatigue Life Assessment of 30CrNiMo8HH Steel Under Variable Amplitude Loading

    The actual service loading histories of most engineering components are characterized by variable amplitudes and are sometimes rather complicated. The goal of this study was to estimate the fatigue life of nickel-chromium-molybdenum 30CrNiMo8HH steel alloy under axial and pure torsion variable …

    waterloo Repository record for Fatigue Life Assessment of 30CrNiMo8HH Steel Under Variable Amplitude Loading (opens in a new tab)

  3. Investigation of the Bauschinger effect in forged Ti-6Al-4V under cyclic loading: effects of loading direction, temperature, and strain-rate

    … impacts, the blades experience repeated cyclic loading that induces plastic strain with each cycle. This phenomenon is characteristic of low-cycle fatigue (LCF), where the blade deforms rapidly over a limited number of cycles due to cyclic plasticity. The impact site also generates a localised …

    oxford Repository record for Investigation of the Bauschinger effect in forged Ti-6Al-4V under cyclic loading: effects of loading direction, temperature, and strain-rate (opens in a new tab)

  4. Dynamic response of highway bridges under a moving truck and development of a rational serviceability requirement

    … dynamic response of bridges under a moving truck load. The effect of bridge dynamic parameters and vehicle moving conditions are investigated, which includes bridge frequency, damping ratio, span length, girders distance, bracing, support conditions, truck speed, load sequence, axle's weight, and …

    njit Repository record for Dynamic response of highway bridges under a moving truck and development of a rational serviceability requirement (opens in a new tab)

  5. BERECHNUNG DER BAUTEILANRIBLEBENSDAUER BEI MEHRACHSIGEN PROPORTIONALEN BEANSPRUCHUNGEN

    … ΜΕΣΗ ΤΙΜΗ ΦΟΡΤΙΣΗΣ, ΣΕΙΡΑ ΔΙΑΔΟΧΗΣ ΤΩΝ ΦΟΡΤΙΩΝ (LOAD SEQUENCE EFFECTS) ΚΑΘΩΣ ΚΑΙ Η ΣΥΝΘΕΤΗ ΜΟΡΦΗ ΑΝΑΠΤΥΞΗΣ ΤΩΝ ΡΩΓΜΩΝ (MIXED MODE). Η ΑΝΑΠΤΥΧΘΕΙΣΑ ΜΕΘΟΔΟΣ ΔΙΑΚΡΙΝΕΤΑΙ ΓΙΑ ΤΗΝ ΑΠΛΗ ΚΑΙ ΕΥΧΡΗΣΤΗ ΕΦΑΡΜΟΓΗ ΤΗΣ, ΤΟ ΣΥΝΤΟΜΟ ΧΡΟΝΟ ΥΠΟΛΟΓΙΣΜΟΥ ΚΑΘΩΣ ΚΑΙ ΤΟ ΧΑΜΗΛΟ ΛΕΙΤΟΥΡΓΙΚΟ ΚΟΣΤΟΣ, ΓΝΩΡΙΣΜΑΤΑ ΥΨΙΣΤΗΣ …

    greece Repository record for BERECHNUNG DER BAUTEILANRIBLEBENSDAUER BEI MEHRACHSIGEN PROPORTIONALEN BEANSPRUCHUNGEN (opens in a new tab)

  6. Elastic-Plastic Fatigue Crack Growth Analysis under Variable Amplitude Loading Spectra

    … In the case of cyclic constant amplitude loading the fatigue crack growth depends only on the crack, the component geometry and the applied loading. In the case of variable amplitude loading it also depends on the preceding cyclic loading history. Various types of load sequence (overloads, …

    waterloo Repository record for Elastic-Plastic Fatigue Crack Growth Analysis under Variable Amplitude Loading Spectra (opens in a new tab)

  7. Reliability based design methodology incorporating residual strength prediction of structural fiber reinforced polymer composites under stochastic variable amplitude fatigue loading

    … high cycle variable amplitude (spectrum) fatigue loads. The focus is on fatigue analyses for axially loaded fiber reinforced polymer (FRP) composites that contain a significant proportion of fibers in the loading direction and thus have fiber-direction dominated failure. The four papers presented …

    vt Repository record for Reliability based design methodology incorporating residual strength prediction of structural fiber reinforced polymer composites under stochastic variable amplitude fatigue loading (opens in a new tab)

  8. Permanent deformation and resilient modulus of unbound granular materials

    … materials under repeated transient traffic loads. Although the permanent deformation is not directly used in pavement design calculation, it affects the long-term performances of pavement foundations. The resilient moduli are used in AASHTO 1993 pavement design and the current …

    iastate Repository record for Permanent deformation and resilient modulus of unbound granular materials (opens in a new tab)

  9. Crack Initiation Analysis in Residual Stress Zones with Finite Element Methods

    … metals and installation procedures that lead to loads outside the anticipated standard operating load envelope. Abaqus was used to generate models that iteratively advanced toward solving this problem using the compact tensile specimen geometry. The first model developed in this study is a …

    vt Repository record for Crack Initiation Analysis in Residual Stress Zones with Finite Element Methods (opens in a new tab)

  10. Load Distribution of Geosynthetic Stabilized Layers over Weak Subgrade

    … of MSL with multi-axial geogrid for static load applications including construction platforms, embankments, and building foundations, and MSL with geocell for repeated load applications for rail track, have been limited. This dissertation contains a discussion of these two field of …

    ku Repository record for Load Distribution of Geosynthetic Stabilized Layers over Weak Subgrade (opens in a new tab)

  11. Longitudinal forces in continuously welded rails due to nonlinear track-bridge interaction for loading sequences

    … due to passing trains. Those three loads have been regulated in Eurocode1 and accomplished by the national codes like DIN Fb-101 in Germany. An additional loading case identified and treated in this thesis is the load due to a change of the coupling stiffness in longitudinal …

    qucosa-diss

  12. Lávka pro pěší přes rychlostní komunikaci

    Cílem práce je návrh lávky pro pěší přes rychlostní komunikaci. Lávku tvoří zavěšená konstrukce o šesti polích s rozpětími 9 až 51 m. Hlavní pole jsou zavěšena na pylonu tvaru písmene V. Mostovka je v poli nad komunikací tvořena prefabrikovanými segmenty spřaženými s monolitickou deskou. V podélném …

    brno-tech Repository record for Lávka pro pěší přes rychlostní komunikaci (opens in a new tab)