Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 59 for “"Load torque"”.

  1. Separating Load Torque Oscillation and Rotor Faults in Stator Current Based-Induction Motor Condition Monitoring

    … as rotor fault signatures. A position-varying load torque oscillation at multiples of the rotational speed, however, has exactly the same effect. Stator current harmonics due to a load torque oscillation often obscure and even overwhelm rotor eccentricity fault detection since the magnitude of …

    gatech Repository record for Separating Load Torque Oscillation and Rotor Faults in Stator Current Based-Induction Motor Condition Monitoring (opens in a new tab)

  2. Analysis and modelling of an induction machine with a pulsating load torque used for a washing machine application

    … drum, a model for the drum with an unbalanced load and to derive a controller for the induction machine. In addition to the models, it should also be investigated if the currents, drawn by the induction machine, will vary with the unbalanced load. Finally it should be investigated if it is …

    chalmers Repository record for Analysis and modelling of an induction machine with a pulsating load torque used for a washing machine application (opens in a new tab)

  3. Fault diagnosis and prediction in reciprocating air compressors by quantifying operating parameters

    … air compressor. Using only measured load torques and shaft dynamics, pressures, temperatures, flow rates, leakages, and heat transfer conditions are quantified to within 5%. The load torque acting on the rotor of the machine is shown to be a function of the dynamics (instantaneous …

    vt Repository record for Fault diagnosis and prediction in reciprocating air compressors by quantifying operating parameters (opens in a new tab)

  4. Nonlinear Robust Control of a Series DC Motor Utilizing the Recursive Design Approach

    … stability of the series DC motor with unknown load-torque and unknown armature inductance is considered. The control technique of recursive, or backstepping, design is employed. Three cases are considered. In the first case, the system is assumed to be perfectly known. In the second case, the …

    ucf Repository record for Nonlinear Robust Control of a Series DC Motor Utilizing the Recursive Design Approach (opens in a new tab)

  5. A dynamic model for an induction motor and its verification

    … used to generate control signals to change the load torque to the induction motor, and to collect the transient data from the motor in response to load torque changes.</p> <p>The dynamic model of the induction motor chosen for the experiment was a well-known fifth order nonlinear differential …

    ut-knoxville Repository record for A dynamic model for an induction motor and its verification (opens in a new tab)

  6. Current commutation and control of brushless direct current drives using back electromotive force samples

    … algorithm with a wide variety of applications, load torque is as a disturbance within the control-loop. Coupling the load to the motor shaft may cause variations of the inertia and viscous friction coefficient besides the load variation. Even for a drive with known load torque characteristics …

    ghent Repository record for Current commutation and control of brushless direct current drives using back electromotive force samples (opens in a new tab)

  7. Motor simulation and parameter identification in a reciprocating mechanism

    … of mass, damping, spring stiffness, and preload force of the mechanism. The time domain data (e.g. the motor net input torque, the mechanism load torque, the angular velocity, and angular acceleration, etc.) of the mechanism from a simulation can be related through the use of Newton’s …

    vt Repository record for Motor simulation and parameter identification in a reciprocating mechanism (opens in a new tab)

  8. Previsão de cavitação em bombas com base na estimação do torque da carga por meio da assinatura elétrica do motor de indução

    … for the detection of this phenomenon is the Load Torque Signature Analysis Method (LTSA). This method uses spectral analysis of the torque developed by the load, obtained from the electrical signals of the motor and the mechanical speed, and based on the relationship between load mechanical …

    brazil-uerj Repository record for Previsão de cavitação em bombas com base na estimação do torque da carga por meio da assinatura elétrica do motor de indução (opens in a new tab)

  9. Adaptyvaus valdymo elektromechaninių vykdymo sistemų tyrimas /

    … instantaneously, but after few cycles. Static load causes the static deviation of the speed. So using the parametric adaptation the moment of inertia is compensated, but load torque can‘t be compensated. The results of the investigation of the signal adaptation principle application in the …

    vilnius Repository record for Adaptyvaus valdymo elektromechaninių vykdymo sistemų tyrimas / (opens in a new tab)

  10. Ελαχιστοποίηση απωλειών σύγχρονων κινητήρων με δρομέα έκτυπων πόλων

    … values depend on the operating speed and the load torque. The proposed method is easily implemented on inverter fed, adjustable speed, motor drives. The efficiency improvement and the energy saving are considerable when the motor operates at light load. The Loss Model Control (LMC) algorithm …

    greece Repository record for Ελαχιστοποίηση απωλειών σύγχρονων κινητήρων με δρομέα έκτυπων πόλων (opens in a new tab)

  11. The Direct Torque Control of Induction Motors

    … being given to vector control and direct torque control techniques. Modern control strategies such as vector control and direct torque control are investigated as well as the conventional methods such as open loop (constant V/f) operation. A number of different pulse width modulation …

    southwales Repository record for The Direct Torque Control of Induction Motors (opens in a new tab) Download PDF for The Direct Torque Control of Induction Motors (opens in a new tab)

  12. Electrical Signature Analysis of Synchronous Motors Under Some Mechanical Anomalies

    … the excitations in the electromagnetic (EM) or load torque. Actually, there is strong coupling within the system which is dynamically dependent on the interactions between the electromagnetic air-gap torque of the synchronous machine and the rotordynamics of the rotor shaft assembly. Typically …

    tamu Repository record for Electrical Signature Analysis of Synchronous Motors Under Some Mechanical Anomalies (opens in a new tab)

  13. ACOUSTIC NOISE ANALYSIS, MEASUREMENT, AND CHARACTERIZATION IN ELECTRIC MOTOR DRIVES

    … The motor is tested at various speed points and load torque values. Two different current control methods are employed for the experiments: a hysteresis controller with a variable switching frequency of up to 20 kHz, and a PWM controller with a switching frequency of 12.5 kHz. Various acoustic …

    mcmaster Repository record for ACOUSTIC NOISE ANALYSIS, MEASUREMENT, AND CHARACTERIZATION IN ELECTRIC MOTOR DRIVES (opens in a new tab)

  14. Diagnosis and Isolation of Air Gap Eccentricities in Closed-loop Controlled Doubly-Fed Induction Generators

    … unbalances in the stator and rotor and load torque oscillations that produce similar effects. The effectiveness of the proposed control is verified using simulations and preliminary experiments performed on a healthy machine.

    tamu Repository record for Diagnosis and Isolation of Air Gap Eccentricities in Closed-loop Controlled Doubly-Fed Induction Generators (opens in a new tab)

  15. Elastic-plastic behaviour of AISiC metal matrix composite rod under combined tension and torsion loading

    … and structural members are subjected to complex loading conditions during service. Typical complex loading conditions can be observed in the case of a bolt When a bolt is tightened to bring machine components together, stresses such as tensile stress (clamp load/area), and torsional or shear …

    dcu Download PDF for Elastic-plastic behaviour of AISiC metal matrix composite rod under combined tension and torsion loading (opens in a new tab)

  16. Modeling and Control Design of Vsi-Fed Pmsm Drive Systems With Active Load

    … of a VSI-fed PMSM drive system with active load is done through simulations of the system model, using modern simulation software packages. A new control method for the speed tracking control based on the estimation of the load torque profile is proposed. A new, multilevel modeling approach …

    vt Repository record for Modeling and Control Design of Vsi-Fed Pmsm Drive Systems With Active Load (opens in a new tab)

  17. Predicting Diesel Engine Performance From Fuel Injector Needle Lift Duration

    … concerning the best measurement of engine torque and performance. The purpose of this study was to determine if engine torque Nm [lbf-ft] and fuel consumption L/h [gal/h] can accurately be predicted using injector needle lift duration (INLD) and engine speed (ERPM). Findings and …

    texas-state Repository record for Predicting Diesel Engine Performance From Fuel Injector Needle Lift Duration (opens in a new tab)

  18. Stored waveform adaptive motor control

    … spite of high-frequency periodic variations in load torque, load inertia, and motor parameters. The controller adapts, stores and replays a schedule of torques to be delivered at discrete points throughout the periodic load cycle. The controller also adapts to non-periodic changes in load …

    vt Repository record for Stored waveform adaptive motor control (opens in a new tab)

  19. Modeling and Control of Magnetic Gear Dynamics in a Wind Turbine Drivetrain

    … equations and Simulink models. The wind turbine torque input to the low speed rotor is modeled as a disturbance input, the generator torque is modeled as a controlled input, and the high-speed rotor speed is the only measured output. The nonlinear dynamics are linearized; and a state space model …

    portland-state Repository record for Modeling and Control of Magnetic Gear Dynamics in a Wind Turbine Drivetrain (opens in a new tab)

  20. Dynamic modeling and feedback control with mode-shifting of a two-mode electrically variable transmission

    … those models that is capable of meeting driver torque demands and performing synchronous mode shifts between different EVT modes while also accommodating preferred engine operating points. The two-input two-output transmission controller proposed herein incorporates motor-generator dynamics, is …

    gatech Repository record for Dynamic modeling and feedback control with mode-shifting of a two-mode electrically variable transmission (opens in a new tab)

Page 1 of 3