Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Load vs. Displacement"”.
-
BUCKLING LOAD STUDY ON POP NUT (RIVET) USING FINITE ELEMENT ANALYSIS
… in riveting operation that includes buckling load analysis using ABAQUS. Finite Element Analysis is used to find the buckling load vs. Displacement results and validated with the results obtained in physical testing of rivet (POP Nut). A mesh sensitivity study is performed using ABAQUS to …
-
Characterization of light weight composite proppants
… response. Furthermore cyclic compression loads are imposed on flat top particles which reveal that significant permanent deformation set in even at low load levels. Computational models include Hertzian representation, 2D and 3D finite element models to simulate single coated and uncoated …
-
Capacity of Reinforced Concrete Beams with Insufficient Shear Detailing
… that the models can successfully capture the load-vs.-displacement curves, as well as the failure patterns. The model is then used in parametric studies to investigate the influence of a number of design parameters on shear capacity, including the spacing between stirrups, the number of legs …
-
Moment-Rotation Behavior of Extended End-Plate Connections Under Cyclic Loading, Phase Two Emphasizing Column-Side Response
… were fabricated from designs based on current Load and Resistance Factor Design (LRFD) procedures and recommendations from top researchers. These experimental specimens consisted of one strong-column/weak-beam specimen ― an 8-bolt, unstiffened, extended end-plate connection (tested to …
-
Analysis of Length Shortening Effect on Bistability and Curvature in a Rectangular Bistable Composite Laminate with a Rigid Tab on One End Integrated to Its Geometry
Bistable composite laminates gained significant attention due to their distinct feature of maintaining multiple stable equilibrium states. The phenomenon stems from thermal stress during the curing process of systematically laid-up Carbon Fiber Prepreg (CFRP), resulting in snap-through behavior …
-
Material Characterization and Finite Element Simulations of Aluminum Alloy Sheets During Non-Isothermal Forming Process
… ambient-to-warm temperature range. For biaxial loading condition, the hydraulic bulge test has been performed and the evaluated effective stress-strain curve is found to be identical to that from uniaxial tests. A new piece-wised temperature-dependent phenomenological constitutive model has been …