Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 577 for “"Loading Rates"”.

  1. Bond of reinforcement in concrete under high loading rates

    … enhancements coming with increasingly dynamic loading. The phenomenon is known as strain or loading rate effect and its causes are still not fully clarified. The work presented herein provides a numerical view of the bond of reinforcement in concrete and investigates its loading rate dependent …

    qucosa-diss

  2. Experimental study of glass plate strength at rapid loading rates

    … is a material property relating to the rate of loading. Except for field explosion and shock tube tests, which were not instrumented for detailed response, glass plate tests to date have been essentially static. The highest loading rate achieved so far in a laboratory has been 3.6 psi/sec. The …

    ttu Repository record for Experimental study of glass plate strength at rapid loading rates (opens in a new tab)

  3. Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling

    … were performed to cover low and high strain rates. The method’s ability to use low strain rate data to predict high strain rate behavior using the Johnson-Cook material model was evaluated. Numerical modeling and parameter optimization were performed in LS-DYNA and LS-OPT, respectively. The …

    chalmers Repository record for Measuring and modeling material properties during high loading rates - Material characterization of A36 steel under high loading rates using the Split Hopkinson Pressure Bar and numerical modeling (opens in a new tab)

  4. Experimental evaluation of static fatigue of window glass under rapid loading rates

    … window glass to failure at eight different load rates. The test method used the concentric rings tester to apply loads. Stress rates ranged from 26 psi/s to 2600 psi/s. Several models which describe the behavior of n as stress rates vary were investigated. A value of n = 14.5 for all the stress …

    ttu Repository record for Experimental evaluation of static fatigue of window glass under rapid loading rates (opens in a new tab)

  5. Optimum Irrigation Loading Rates of Highly Saline Wastewater on a Montmorillonitic Soil

    Annual applications of 125, 90, and 50 cm of secondary-treated municipal effluent were applied to a 0.76 cm/hr glaciated soil growing alfalfa for 3 years. All treatments had weekly applications with the depth of application varying from 1.5-3.2 cm for the low rate plot to 3.8-8 cm for the high …

    sdstate Repository record for Optimum Irrigation Loading Rates of Highly Saline Wastewater on a Montmorillonitic Soil (opens in a new tab)

  6. Wetland Vegetation Dynamics and Ecosystem Gas Exchange in Response to Organic Matter Loading Rates

    … if any, have quantified the effect of various loadings of organic matter in created wetlands. The goal of this study was to determine how vegetation composition, standing crop biomass, woody vegetation development, and ecosystem gas exchange varied in a created freshwater wetland along a …

    wm-mary Repository record for Wetland Vegetation Dynamics and Ecosystem Gas Exchange in Response to Organic Matter Loading Rates (opens in a new tab)

  7. Effects of Curing Cycle and Loading Rates on the Bearing Stress of Double Shear Composite Joints

    … inside the double shear joint fixture at a loading rate of 0.05 in./min. (quasi-static). The second task is to numerically model and validate the aluminum double shear joint specimen. The third task is to test the Unidirectional MTM 49 carbon fiber pre-preg double shear composite joint …

    calpoly Repository record for Effects of Curing Cycle and Loading Rates on the Bearing Stress of Double Shear Composite Joints (opens in a new tab)

  8. Development of Methods to Evaluate Dynamic Fracture Toughness of Metallic Materials at Very High Loading Rates Under Limited Plastic Deformation Conditions

    … properties of metallic materials at high strain rates has been challenging, notwithstanding the application of steel for intermediate and dynamic loading conditions. This is due to a lack of sophisticated measuring tools which will require a very high-speed camera to capture the stages of …

    lancaster Download PDF for Development of Methods to Evaluate Dynamic Fracture Toughness of Metallic Materials at Very High Loading Rates Under Limited Plastic Deformation Conditions (opens in a new tab)

  9. Geochemistry of Ground Water - Surface Water Interactions and Metals Loading Rates in the North Fork of the American Fork River, Utah, from an Abandoned Silver/Lead Mine

    … waters were used to determine toxic metals loading rates in the North Fork and its tributaries. The results suggest that the dissolved toxic metals (As, Cd, Cu, Fe, Mn, Pb, and Zn) enter the North Fork when the river is gaining water from the ground water. However, the total toxic metal load …

    utahstate Repository record for Geochemistry of Ground Water - Surface Water Interactions and Metals Loading Rates in the North Fork of the American Fork River, Utah, from an Abandoned Silver/Lead Mine (opens in a new tab)

  10. Rate Dependent Strength Characterization of Carbon Fiber Composite Laminates

    … for modeling is often completed at quasi-static loading rates regardless of the loading rates the final part will experience. This thesis will discuss the rate dependency of strength characteristics and Schapery parameters of a composite laminate under quasi-static, intermediate, and high rate …

    washington Repository record for Rate Dependent Strength Characterization of Carbon Fiber Composite Laminates (opens in a new tab)

  11. Stress-density relationships for an agricultural soil

    Triaxial tests under high loading rates and different confining pressures simulate the multi-pass effect of a tractor wheel loading on the soil. A volume measuring technique was developed to be used in triaxial tests conducted under high loading rates. A sandy clay agricultural soil was tested …

    vt Repository record for Stress-density relationships for an agricultural soil (opens in a new tab)

  12. Nitrate removal capacity of constructed wetlands

    … Three flow through wetlands received different loading rates of pumped river water with seasonably variable loads of nitrate and organic nitrogen. The nitrogen removal capacities of the wetlands were estimated using mass balance and sediment-water microcosms for the 1991 and 1992 field seasons. …

    iastate Repository record for Nitrate removal capacity of constructed wetlands (opens in a new tab)

  13. OPTIMIZATION OF DISSOLVED AIR FLOTATION FOR DRINKING WATER TREATMENT THROUGH CFD MODELING

    … under different air fractions, bubble sizes, and loading rates. The CFD model showed that stratified flow improved bubble removal as well as particle removal, demonstrating that up to 130% higher loading rates can be achieved in the presence of stratified flow. An increase in air fraction and …

    toronto-retro Repository record for OPTIMIZATION OF DISSOLVED AIR FLOTATION FOR DRINKING WATER TREATMENT THROUGH CFD MODELING (opens in a new tab)

  14. A STUDY OF THE MICROORGANISMS INHABITING ROTATING BIOLOGICAL CONTACTOR BIOFILMS DURING VARIOUS OPERATING CONDITIONS

    … in RBC biofilms as a function of organic loading. Biofilms, in pilot-scale RBCs receiving 2.0, 4.0, and 6.0 g TOC/m('2)(.)d of settled domestic sewage, were examined using light and electron microscopy. The microbial community, composed of filamentous and unicellular bacteria, …

    unh-thes Repository record for A STUDY OF THE MICROORGANISMS INHABITING ROTATING BIOLOGICAL CONTACTOR BIOFILMS DURING VARIOUS OPERATING CONDITIONS (opens in a new tab)

  15. Achieving Peak Flow and Sediment Loading Reductions through Increased Water Storage in the Le Sueur Watershed, Minnesota: A Modeling Approach

    … the Minnesota River Basin’s stream flows and the rates at which channel banks and bluffs are eroded. Increasing erosion rates have contributed to higher sediment-loading rates, excess turbidity levels, and increases in sedimentation rates in Lake Pepin further downstream. These issues have …

    umn Repository record for Achieving Peak Flow and Sediment Loading Reductions through Increased Water Storage in the Le Sueur Watershed, Minnesota: A Modeling Approach (opens in a new tab)

Page 1 of 29